Share Email Print

Proceedings Paper

Advanced CD-SEM metrology for qualification of DSA patterns using coordinated line epitaxy (COOL) process
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Directed self-assembly (DSA) applying chemical epitaxy is one of the promising lithographic solutions for next generation semiconductor device manufacturing. Especially, DSA lithography using coordinated line epitaxy (COOL) process is obviously one of candidates which could be the first generation of DSA applying PS-b-PMMA block copolymer (BCP) for sub-15nm dense line patterning . DSA can enhance the pitch resolutions, and can mitigate CD errors to the values much smaller than those of the originally exposed guiding patterns. On the other hand, local line placement error often results in a worse value, with distinctive trends depending on the process conditions. To address this issue, we introduce an enhanced measurement technology of DSA line patterns with distinguishing their locations in order to evaluate nature of edge placement and roughness corresponding to individual pattern locations by using images of CD-SEM. Additionally correlations among edge roughness of each line and each space are evaluated and discussed. This method can visualize features of complicated roughness easily to control COOL process. As a result, we found the followings. (1) Line placement error and line placement roughness of DSA were slightly different each other depending on their relative position to the chemical guide patterns. (2) In middle frequency area of PSD (Power Spectral Density) analysis graphs, it was observed that shapes were sensitively changed by process conditions of chemical stripe guide size and anneals temperature. (3) Correlation coefficient analysis using PSD was able to clarify characteristics of latent defect corresponding to physical and chemical property of BCP materials.

Paper Details

Date Published: 4 April 2016
PDF: 9 pages
Proc. SPIE 9778, Metrology, Inspection, and Process Control for Microlithography XXX, 977816 (4 April 2016); doi: 10.1117/12.2218605
Show Author Affiliations
Takeshi Kato, Hitachi High-Technologies Corp. (Japan)
Junko Konishi, Hitachi High-Technologies Corp. (Japan)
Masami Ikota, Hitachi High-Technologies Corp. (Japan)
Satoru Yamaguchi, Hitachi High-Technologies Corp. (Japan)
Yuriko Seino, EUVL Infrastructure Development Ctr., Inc. (Japan)
Hironobu Sato, EUVL Infrastructure Development Ctr., Inc. (Japan)
Yusuke Kasahara, EUVL Infrastructure Development Ctr., Inc. (Japan)
Tsukasa Azuma, EUVL Infrastructure Development Ctr., Inc. (Japan)

Published in SPIE Proceedings Vol. 9778:
Metrology, Inspection, and Process Control for Microlithography XXX
Martha I. Sanchez, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?