Make your plans to attend
Vaccination required
>
Conference 11988 > Paper 11988-603
Paper 11988-603

How laser-based fabrication methods can be used to produce multifunctional surfaces (Hot Topics)

24 January 2022 • 5:40 PM - 6:00 PM PST | Room 207/215 (Level 2 South)

Abstract

Laser-microtextured surfaces have gained an increasing interest due to their enormous spectrum of applications and industrial scalability. In this frame, several research studies have demonstrated how laser-based fabrication methods can be used to produce functional surfaces. Furthermore, it has been demonstrated is many cases, that the combination of structures with feature sizes in different ranges (e.g., microelements decorated with nanostructures) can not only further enhanced specific functions but also to provide surfaces with several functionalities. In this context, this talk shows how Direct Laser Interference Patterning (DLIP), Direct Laser Writing (DLW) and Laser Induced Periodic Surface Structures (LIPSS) can be combined, reaching advanced functionalities on technological relevant materials.

Presenter

TU Dresden (Germany), Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS (Germany)
Andrés Lasagni received his Ph.D. in materials science from Saarland University, Germany, in 2006. From 2007 to 2008 he was researcher at Georgia Tech and later Team manager at Fraunhofer IWS. Since 2012 he is professor at the TU Dresden. He is the author of more than 300 articles and 30 patents.
Presenter/Author
TU Dresden (Germany), Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS (Germany)