Micromirrors and 1D scanning produce an enlarged holographic color display

A new holographic display, which combines 2D light modulation by micromirrors and 1D horizontal scanning, enlarges the screen size and viewing angle as well as providing color images.
02 May 2014
Yasuhiro Takaki

Three-dimensional televisions are not successful because their 3D images do not meet people's expectations. Viewers have to wear 3D glasses, and visual fatigue prevents long-duration viewing. An ideal 3D display technique that overcomes these problems is holography. People are anticipating holographic displays because they have seen them depicted in science fiction movies. As development of 2D display technologies has been reaching saturation, many research groups around the world are developing holographic displays.

Purchase SPIE Field Guide to IlluminationHolograms are interference fringe patterns with fringe pitches as small as the wavelength of light. Their electronic implementation therefore requires display systems that have a pixel pitch of approximately one micron. For 2D displays, the screen size can be enlarged easily by increasing the pixel pitch. The screen size for holographic displays, however, can only be enlarged by increasing the number of pixels. For instance, to obtain a 40-inch screen, 886,000×498,000 pixels are required. Several research groups are developing ultrahigh-resolution spatial light modulators (SLMs) and techniques for using multiple SLMs as a way to produce holographic displays with very large pixel counts: see Figure 3(a) and (b).

About 20 years ago, a research group at the Massachusetts Institute of Technology argued that development of such ultrahigh-resolution SLMs and use of a huge number of SLMs were not practical, and they proposed a novel approach: high-resolution 1D light modulation by an acousto-optic modulator followed by 2D scanning by a polygon mirror and a galvano mirror.1 That is, the system produces a small horizontal sliver of the hologram image and scans this sliver across the full display area somewhat like the raster scanning of an electron beam across the screen of a cathode ray tube: see Figure 3(c). This approach has been very successful, with several display systems demonstrated, but these systems require high-speed scanning in the horizontal direction.

Our approach is to combine 2D light modulation with 1D scanning.2 In brief, our system produces a full vertical slice of the 3D image and scans horizontally across the display area: see Figure 3(d). First, a microelectromechanical system (MEMS) SLM modulates light two-dimensionally at a high frame rate (see Figure 1). Then an anamorphic imaging system, comprising two orthogonally aligned cylindrical lenses, squeezes images horizontally and stretches them vertically. The resulting vertically enlarged image, called an elementary hologram, has a reduced pixel pitch in the horizontal direction, which increases the horizontal viewing angle. Finally, a horizontal scanner scans the elementary holograms to enlarge the width of the screen. A single-sideband filter in the anamorphic imaging system eliminates the conjugate image and zero-order diffraction light. Our system does not require vertical scanning, but does require horizontal scanning at the video rate (e.g., 60Hz).

Figure 1. Schematic of holographic display using a microelectromechanical system (MEMS) spatial light modulator (SLM) and 1D horizontal scanning. SSB: Single sideband.

Figure 2. Experimental system. The digital micromirror device (DMD) serves as the MEMS SLM and the galvano mirror performs the horizontal scanning.

In our first experimental system, we used a digital micromirror device (DMD) with a frame rate of 8000Hz as the MEMS SLM (see Figure 2). We used a galvano mirror with a scanning frequency of 60Hz as the horizontal scanner. The horizontal pixel pitch was reduced to 2.5 microns, the viewing zone angle was enlarged to 15°, and the screen size was enlarged to 3.5 inches. Figure 4 shows a reconstructed image.

Figure 3. Comparison of holographic display techniques. Using SLMs to produce the full hologram requires either (a) an ultrahigh-resolution SLM or (b) a large array of SLMs. 2D raster scanning schemes (c) require high-speed scanning. The horizontally scanning holographic display (d) uses high-speed MEMS technology and 1D scanning at the video rate. AOM: Acousto-optic modulator.

Figure 4. Reconstructed 3D image of a hand, as captured from three different horizontal positions. The red symbols were displayed at distances of 50mm (|||), 100mm (⋄), and 150mm (×) in front of the screen.

A drawback of this system, however, is that the DMD can generate only binary images (that is, each pixel of the hologram fringe pattern is either black or white). To solve this problem, we modulated the power of the laser diode illuminating the DMD.3 By illuminating different elementary holograms with different laser powers, we improved the grayscale representations of the reconstructed images. Figure 5 shows a grayscale reconstructed image with a screen size of 4.3 inches, produced using a DMD with a frame rate of 13,333Hz. We also used this time-multiplexing technique to generate color reconstructed images by illuminating the DMD with red, green, and blue lasers.4 Figure 6 shows a color reconstructed image with a screen size of 5.0 inches and a horizontal scanning frequency of 30Hz.

Figure 5. Reconstructed 3D image with improved grayscale representation achieved by modulating the power of the illuminating laser.

Figure 6. Reconstructed 3D color image produced by using red, green, and blue lasers.

An advantage of holography is that it can generate 3D images on which the human eye can focus. Conventional glasses-free 3D displays that use a lenticular lens or a parallax barrier do not produce such images, which leads to vergence-accommodation conflict, causing visual fatigue. (Vergence is the opposite rotation of the left and right eyeballs to point toward an object at a specific distance, whereas accommodation is the focusing function of an eye.) We studied this property of our system by measuring the accommodation of people looking at images in our holographic display.5 We found that responses to the reconstructed images were similar to those for real objects, even when the reconstructed images were 400mm in front of the display screen.

In summary, we have developed a technique for producing enlarged 3D color images by anamorphic imaging and 1D scanning of an elementary hologram generated by MEMS. Our approach avoids drawbacks of other schemes, such as requiring large areas of SLMs or a high rate of raster scanning. Our method benefits from high-speed operations and high integration of micromirrors provided by MEMS technology. So far, however, we have used MEMS SLMs that were developed for video projectors. In future work, development of MEMS SLMs that are specialized for holographic displays will improve the display performance, as will the use of multiple MEMS SLMs.

Yasuhiro Takaki
Tokyo University of Agriculture and Technology
Koganei, Japan

Yasuhiro Takaki is a professor. He received his BS, MS, and Dr. Eng. degrees from Waseda University in 1986, 1988, and 1992, respectively. His research interests are super-multiview displays and holographic displays.

1. P. St. Hilaire, S. A. Benton, M. Lucente, Synthetic aperture holography: a novel approach to three-dimensional displays, J. Opt. Soc. Am. A 9(11), p. 1969-1977, 1992. doi:10.1364/JOSAA.9.001969
2. Y. Takaki, N. Okada, Hologram generation by horizontal scanning of a high-speed spatial light modulator, Appl. Opt. 48(17), p. 3255-3260, 2009. doi:10.1364/AO.48.003255
3. Y. Takaki, M. Yokouchi, N. Okada, Improvement of grayscale representation of the horizontally scanning holographic display, Opt. Express 18(24), p. 24926-24936, 2010. doi:10.1364/OE.18.024926
4. T. Nakajima, Y. Matsumoto, Y. Takaki, Color image generation by horizontally scanning holography, Proc. Digital Holography Three-Dimensional Imaging, p. DTh2A.2, 2013. doi:10.1364/DH.2013.DTh2A.2
5. Y. Takaki, M. Yokouchi, Accommodation measurements of horizontally scanning holographic display, Opt. Express 20(4), p. 3918-3931, 2012. doi:10.1364/OE.20.003918
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?