Share Email Print


Third European Seminar on Precision Optics Manufacturing
Editor(s): Rolf Rascher; Oliver Fähnle; Christine Wünsche; Christian Schopf
For the purchase of this volume in printed format, please visit

Volume Details

Volume Number: 10009
Date Published: 15 July 2016

Table of Contents
show all abstracts | hide all abstracts
Front Matter: Volume 10009
Author(s): Proceedings of SPIE
Improving efficiency of chemo-mechanical polishing processes by systematic selection and conditioning of the polishing suspension
Author(s): Christian J. Trum; Rolf Rascher
Show Abstract
Analysis of tool-mass-acceleration effects onto sub-aperture computer controlled polishing (CCP)
Author(s): Oliver Faehnle; Guoyu Yu; David Walker
Show Abstract
Aspheric mismatch of rigid tools
Author(s): Wilhelmus A. C. M. Messelink
Show Abstract
Chemical influence of different pH-values on ductile mode processing through ultra-precision diamond turning
Author(s): Marius Doetz; Olaf Dambon; Fritz Klocke; Oliver Faehnle
Show Abstract
Hexapod as primary kinematic system for applications in the optic industry
Author(s): R. Schneider; C. Trum
Show Abstract
Automatic inspection for surface imperfections: requirements, potentials and limits
Author(s): Ralph Neubecker; Jenny E. Hon
Show Abstract
A novel approach towards standardizing surface quality inspection
Author(s): Fabian Etzold; Daniel Kiefhaber; Arno F. Warken; Peter Würtz; Jenny Hon; Jean-Michel Asfour
Show Abstract
In plane laser-interferometric sensor
Author(s): Enrico Langlotz; Denis Dontsov; Walter Schott
Show Abstract
Deflectometric acquisition of large optical surfaces (DaOS) using a new physical measurement principle: vignetting field stop procedure
Author(s): E. Hofbauer; R. Rascher; M. Schilke; J. Liebl; J.-P. Richters
Show Abstract
Form measurement of large optics with deflectometric and interferometric procedures at PTB
Author(s): Gerd Ehret; Sören Laubach; Andreas Straub; Michael Schulz
Show Abstract
Capabilities and perfomance of the wavefront-based alignment in multi element optical systems
Author(s): Reik Krappig; Robert Schmitt
Show Abstract
Survey of fiducials, edges and the backside surface for the measurement of aspheres and freeforms
Author(s): Andreas Beutler
Show Abstract
Performance measurement of high precision optical assemblies for cosmological observations: comparison of different approaches
Author(s): Chr. Bodendorf; A. Bode; N. Geis; D. Penka; F. Grupp; R. Bender
Show Abstract
Fluid jet polishing of steel moulds
Author(s): Victor Grün; Rainer Börret; Marco Speich; Dominik Wiedemann
Show Abstract
ISERM: in-situ etch rate measurement system
Author(s): S. Gürtler; M. Georges; C. Schikora
Show Abstract
Closing the metrology/process loop in CNC polishing
Author(s): David D. Walker; Guoyu Yu; Matt Bibby; Hongyu Li; Christina R. Dunn
Show Abstract
Integrating production machines in a manufacturing execution system (MES)
Author(s): Benjamin Welsch
Show Abstract
Improving low, mid and high-spatial frequency errors on advanced aspherical and freeform optics with MRF
Author(s): Chris Maloney; Jean Pierre Lormeau; Paul Dumas
Show Abstract
Precision glass molding: cost efficient production of glass-optics with spectral range from 180nm ultraviolet to 13µm thermal infrared
Author(s): Jan-Helge Staasmeyer; Holger Kreilkamp; Olaf Dambon; Fritz Klocke
Show Abstract
Interferometric measurement of highly accurate flat surfaces
Author(s): J. Liebl; H. Linthe; S. Sitzberger; R. Rascher
Show Abstract
An investigation on the efficiency of the manufacturing of components in precision optics
Author(s): Sebastian Sitzberger; Rolf Rascher
Show Abstract
Prediction of grinding tool wear and lifetime by using a test bench
Author(s): C. Vogt; S. Sinzinger; M. Rohrbacher; R. Rascher
Show Abstract
Surface reconstruction by using Zernike polynomials
Author(s): Manon Schilke; Johannes Liebl; Christine Wünsche
Show Abstract
Numerical simulation of pitch button blocking optimization
Author(s): Lunzhe Wu; Wenlan Gao; Aihuan Dun; Minghong Yang; Chaoyang Wei; Xueke Xu; Jianda Shao
Show Abstract
From holographic displays to volume gratings and off-axis parabolic mirrors
Author(s): G. Fütterer
Show Abstract
Process control for centering of cemented components
Author(s): Markus Lipp
Show Abstract

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?