Share Email Print

Proceedings Paper

Improvement of KrF contact layer by inverse lithography technology with assist feature
Author(s): Sungho Jun; Yeon-Ah Shim; Jaeyoung Choi; Kwangsun Choi; Jae-won Han; Kechang Wang; John McCarthy; Guangming Xiao; Grace Dai; DongHwan Son; Xin Zhou; Tom Cecil; David Kim; KiHo Baik
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Patterning of contact holes using KrF lithography system is one of the most challenging tasks for the sub-90nm technology node,. Contact hole patterns can be printed with a KrF lithography system using Off-Axis Illumination (OAI) such as Quasar or Quadrupole. However, such a source usually offers poor image contrast and poor depth of focus (DOF), especially for isolated contact holes. In addition to image contrast and DOF, circularity of hole shape is also an important parameter for device performance. Sub-resolution assist features (SRAF) can be used to improve the image contrast, DOF and circularity for isolated contact holes. Application of SRAFs, modifies the intensity profile of isolated features to be more like dense ones, improving the focal response of the isolated feature. The insertion of SRAFs in a contact design is most commonly done using rule-based scripting, where the initial rules for configuring the SRAFs are derived using a simulation tool to determining the distance of assist features to main feature, and the size and number of assist features to be used. However in the case of random contact holes, rule-based SRAF placement is a nearly impossible task. To address this problem, an inverse lithography technique was successfully used to treat random contact holes. The impact of SRAF configuration on pattern profile, especially circularity and process margin, is demonstrated. It is also shown that the experimental data are easily predicted by calibrating aerial image simulation results. Finally, a methodology for optimizing SRAF rules using inverse lithography technology is described.

Paper Details

Date Published: 26 May 2010
PDF: 9 pages
Proc. SPIE 7748, Photomask and Next-Generation Lithography Mask Technology XVII, 77481V (26 May 2010); doi: 10.1117/12.868563
Show Author Affiliations
Sungho Jun, Dongbu HiTek Co., Ltd. (Korea, Republic of)
Yeon-Ah Shim, Dongbu HiTek Co., Ltd. (Korea, Republic of)
Jaeyoung Choi, Dongbu HiTek Co., Ltd. (Korea, Republic of)
Kwangsun Choi, Dongbu HiTek Co., Ltd. (Korea, Republic of)
Jae-won Han, Dongbu HiTek Co., Ltd. (Korea, Republic of)
Kechang Wang, Luminescent Technologies, Inc. (United States)
John McCarthy, Luminescent Technologies, Inc. (United States)
Guangming Xiao, Luminescent Technologies, Inc. (United States)
Grace Dai, Luminescent Technologies, Inc. (United States)
DongHwan Son, Luminescent Technologies, Inc. (United States)
Xin Zhou, Luminescent Technologies, Inc. (United States)
Tom Cecil, Luminescent Technologies, Inc. (United States)
David Kim, Luminescent Technologies, Inc. (United States)
KiHo Baik, Luminescent Technologies, Inc. (United States)

Published in SPIE Proceedings Vol. 7748:
Photomask and Next-Generation Lithography Mask Technology XVII
Kunihiro Hosono, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?