Share Email Print

Proceedings Paper

Interface strain transfer mechanism and error modification for adhered FBG strain sensor
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

The application of adhered FBG strain sensor is affected by interface strain transfer and error modification. In his paper, firstly, based on the characterstics of forces and damage, the fundamental hupotheses are given, and the general expression of interface transferring mechanism is derived. After that, united form of the characteristic value-λ for the general equation is geven for the multi-layer coatings. Finally, according to the error-modified equation of adhered FBG sensor, the relationships the error rate η against the shear modulus and the thckness of the glue are given. With regard to the glue applied in engineering (thickness is from 4mm to 60mm, shear modulus is from 30MPa to 200MPa), the error rate η is about 5~10%, and the correction coefficient k is about 1.05~1.11. Hence, the error modification must be considered when adhered FBG strain sensors are used in civil engineering.

Paper Details

Date Published: 8 June 2005
PDF: 10 pages
Proc. SPIE 5851, Fundamental Problems of Optoelectronics and Microelectronics II, (8 June 2005); doi: 10.1117/12.634066
Show Author Affiliations
Jilong Li, Harbin Institute of Technology (China)
Zhi Zhou, Harbin Institute of Technology (China)
Jinping Ou, Harbin Institute of Technology (China)

Published in SPIE Proceedings Vol. 5851:
Fundamental Problems of Optoelectronics and Microelectronics II
Yuri N. Kulchin; Oleg B. Vitrik; Vladimir I. Stroganov, Editor(s)

© SPIE. Terms of Use
Back to Top