Share Email Print

Proceedings Paper

High NA-fibers: silica-based fibers for new applications
Author(s): Karl-Friedrich Klein; Hanns Simon Eckhardt; Christiane Vincze; Stephan Grimm; Johannes Kirchhof; Jens Kobelke; Jim Clarkin; Gary Nelson
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

For medical and analytical applications, thick-core fibers based on synthetic silica are widely spread. In many cases, the fibers are used as a light-guiding medium only; therefore, the coupling efficiency between the light-emitting area and the accepting fiber is of great importance described easily by the light acceptance cone related to the numerical aperture of the fiber. In the past, all-silica fibers with un-doped silica core and fluorine-doped silica cladding have been used for different applications. However, these fibers are restricted in respect to a low numerical aperture of typically 0.22. To increase the numerical aperture, different polymers can be used for cladding material. In addition to standard polymers, Teflon-AF is an attractive candidate for significantly higher NAs of approx. 0.65. In parallel, a new class of all-silica fibers was developed with high NA, the so-called “Air-clad” or microstructured fibers. Longitudinal microstructured holes, in the order of the wavelength, form the cladding-region together with the surrounding silica. The dimensions of the microstructure dictate the critical angle for light transmission in the core, rather than the refractive index of the cladding material. The light guiding properties of different fibers will be compared. Especially the optical transmission from the UV-region up to the NIR-region will be discussed. Due to the wavelength-dependent mean value of the refractive index (RI) in the cladding, the definition of numerical aperture has to be adjusted. Especially, the UV-damage within Teflon-coated fibers and the microstructured fibers will be described in detail.

Paper Details

Date Published: 23 March 2005
PDF: 12 pages
Proc. SPIE 5691, Optical Fibers and Sensors for Medical Applications V, (23 March 2005); doi: 10.1117/12.591683
Show Author Affiliations
Karl-Friedrich Klein, Fachhochschule Giessen-Friedberg (Germany)
Hanns Simon Eckhardt, Fachhochschule Giessen-Friedberg (Germany)
Christiane Vincze, Fachhochschule Giessen-Friedberg (Germany)
Stephan Grimm, Institute of Physical High Technology (Germany)
Johannes Kirchhof, Institute of Physical High Technology (Germany)
Jens Kobelke, Institute of Physical High Technology (Germany)
Jim Clarkin, Polymicro Technologies LLC (United States)
Gary Nelson, Polymicro Technologies LLC (United States)

Published in SPIE Proceedings Vol. 5691:
Optical Fibers and Sensors for Medical Applications V
Israel Gannot, Editor(s)

© SPIE. Terms of Use
Back to Top