Share Email Print

Proceedings Paper

Effect of the effective resist diffusion length to the photolithography at 65- and 45-nm nodes: a study with simple and accurate analytical equations
Author(s): Qiang Wu; Scott D. Halle; Zengqin Zhao
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

As the current photolithography moves toward the 65 and 45 nm nodes, resist blur, which is now around 50 to 90 nm full width at half maximum (FWHM), starts to limit the printability of narrow pitches by lowering image contrast, increasing mask error factor (MEF), and changing critical dimension (CD) through pitch behavior. Since such resist blur is known to originate from acid and base diffusion, which is an important process for chemical amplification, the reduction of such blur may affect the resist performance. Therefore, knowing how much diffusion can be tolerated at any given lithographic condition is critical to the success of photolithography at the 65 and 45 nm nodes. In this paper, we present a systematic study of the effect of the resist diffusion with a series of simple and accurate analytic equations and experimental data for the 193 nm lithography. We also extend our predictions to the 193 nm immersion lithography. We first show a simple way to accurately measure the effective resist diffusion length through the regular wafer exposure method for many typical resists. We then show a method to accurately quantify the contrast reduction due to such resist diffusion for both alternating phase shifting masks (Alt-PSM) and attenuated phase shifting masks (Att-PSM). We conclude that the contrast reduction is very significant with typical 193 nm resists, which have diffusion lengths of around 30 to 40 nm. In the study, we found that the mask error factor (MEF), though dependent on the illumination condition, is a strong function of the resist diffusion length at any given illumination condition. For example, in the alt-PSM case, the MEF is almost entirely determined by the resist diffusion. In the att-PSM case, however, the MEF is only partially dependent on the resist diffusion length, about 50%. In fact, a short diffusion length of less than 20 nm will be required to extend its litho-worthiness to the 45 nm node with contrast levels comparable to the current ones. Plots of the contrast and MEF through pitch for both alt-PSM and att-PSM for various diffusion lengths under typical lithographic conditions will be presented. Experimental verification of the above analytical equations will be presented.

Paper Details

Date Published: 28 May 2004
PDF: 12 pages
Proc. SPIE 5377, Optical Microlithography XVII, (28 May 2004); doi: 10.1117/12.544255
Show Author Affiliations
Qiang Wu, IBM Microelectronics Div. (United States)
Scott D. Halle, IBM Microelectronics Div. (United States)
Zengqin Zhao, IBM Microelectronics Div. (United States)

Published in SPIE Proceedings Vol. 5377:
Optical Microlithography XVII
Bruce W. Smith, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?