Share Email Print

Proceedings Paper

Characterization of an ultra-thick positive photoresist for electroplating applications
Author(s): Brad K. Avrit; Edward W. Maxwell; Lisa M. Huynh; Elliott S. Capsuto
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

The performance requirements for ultra-thick photoresists are rapidly increasing with the dramatic growth in new lithographic applications that require electroplating processes. Two of the main applications for ultra-thick photoresists are nanotechnology (MEMS) and advanced packaging. Flipchip packaging has become widely adopted to address electrical device performance and chip form factor considerations. The growth in the nanotechnology market is driven by a wide range of products, which include accelerometers, ink jet print heads, biomedical sensors and optical switches. Electroplating levels for these applications require a photosensitive polymer material capable of coating, exposing and plating with conventional semiconductor equipment and standard ancillary process chemicals. A single coat step to achieve the final photoresist thickness is critical to minimize the number of process steps and cycle time. For this thick layer the sidewall profile, aspect ratio, electroplating durability and subsequent stripability are all important. This study characterized a novel positive photoresist (Shin-Etsu SIPR) for use in a 100 micron thick coat for electroplating on copper. The lithographic performance of the ultra-thick positive photoresist was optimized using a broad band, 1X KARL SUSS MA150 aligner used in the proximity mode. All proximity gaps were hard set at 100 microns. Cross sectional SEM analysis, process linearity, and optimized proximity gaps were used to establish the lithographic capabilities. High aspect ratio structures were then electroplated using the optimized photoresist process to demonstrate photoresist durability and stripability. A recommended process flow is described for this photoresist and exposure tool.

Paper Details

Date Published: 14 May 2004
PDF: 10 pages
Proc. SPIE 5376, Advances in Resist Technology and Processing XXI, (14 May 2004); doi: 10.1117/12.537120
Show Author Affiliations
Brad K. Avrit, TriQuint Semiconductor, Inc. (United States)
Edward W. Maxwell, TriQuint Semiconductor, Inc. (United States)
Lisa M. Huynh, TriQuint Semiconductor, Inc. (United States)
Elliott S. Capsuto, Shin-Etsu MicroSi, Inc. (United States)

Published in SPIE Proceedings Vol. 5376:
Advances in Resist Technology and Processing XXI
John L. Sturtevant, Editor(s)

© SPIE. Terms of Use
Back to Top