Share Email Print

Proceedings Paper

Effect of shielding conditions on welding properties in underwater local-dry laser welding
Author(s): Xudong Zhang; Wuzhu Chen; Eiji Ashida; Fukuhisa Matsuda
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

In underwater laser beam welding, the shielding condition of the local dry cavity is one of the key factors affecting the weld quality. The variation in the weld bead formation and mechanical properties of the welded joint under various shielding conditions was investigated in this paper. The welding experiments were performed with Type3O4 stainless steel as base metal and Type-ULC308 electrode as the filler wire by using a 4kW Nd:YAG laser. The experimental results show that variation of gas flow speed has important influence on the weld bead formation. The bead width and reinforcement of the welds vary slightly under different gas flow speed, but the penetration depth is much lower under higher gas flow speed. Lower gas flow speed induces poor shielding conditions and increases the oxygen content of weld metal up to 800ppm, but higher gas flow speed that may form an excellent local dry cavity could prevent the weld metal being oxidized, with only about 8Oppm in oxygen content. Although the tensile strength of underwater laser welds keeps constant no matter how the shielding conditions are, the ductility of weld metal decreases largely for the weld obtained in poor shielding conditions comparing with that of good shielding conditions. The structure of the shielding nozzle has more important effect on the shielding condition, in specific, appropriately enlarging the outside diameter can considerably improve the stability of the local dry cavity.

Paper Details

Date Published: 12 September 2002
PDF: 10 pages
Proc. SPIE 4915, Lasers in Material Processing and Manufacturing, (12 September 2002); doi: 10.1117/12.482868
Show Author Affiliations
Xudong Zhang, Tsinghua Univ. (China)
Wuzhu Chen, Tsinghua Univ. (China)
Eiji Ashida, Japan Power Engineering and Inspection Corp. (Japan)
Fukuhisa Matsuda, Japan Power Engineering and Inspection Corp. (Japan)

Published in SPIE Proceedings Vol. 4915:
Lasers in Material Processing and Manufacturing
ShuShen Deng; Tatsuo Okada; Klaus Behler; XingZong Wang, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?