Share Email Print

Proceedings Paper

Electron-beam lithography method for sub-50-nm isolated trench with high aspect ratio
Author(s): XiaoMin Yang; Andrew R. Eckert; Keith Mountfield; Harold Gentile; Carl Seiler; Stanko Brankovic; Robert Harris; Earl Johns
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

An electron beam lithography method for printing and plating sub-50 nm isolated trenches with a high aspect ratio has been developed for the nanofabrication of magnetic thin film heads. To eliminate the issues of resist footing and resist residue in the narrow trench process, we put a thin dissolution layer of polymethylglutarimide (PMGI) as an undercoat layer between a seed layer and a resist layer. The undercoat dissolution layer competely cleared off the seed layer by the developer solution such that the sides of the narrow trench are vertical, particularly at the bottom of the narrow trench, thus facilitating plating the narrow trench with a high magnetic moment material. In this work, the narrow trenches were electroplated with both 1.0T NiFe and 1.8T CoNiFe. Three key issues in our trench process will be discussed here, including: 1) critieria for the selection of the undercoat dissolution layer materials; 2) processing conditions control , e.g. the thickness and the bake temperature of the dissolution layer to achieve vertical and smooth sidewalls; and 3) PEB delay on the narrow trench CD control, pattern degeneration, and the results from the resist top coat (RTC) experiments. With our new narrow trench process, we demonstrated the capability of fabricating narrow electrodeposited magnetic write structures with a CD of 35 nm in 0.35 μm resist (AR=10:1) and a CD of 30 nm in 0.25 μm resist (AR=8:1).

Paper Details

Date Published: 16 June 2003
PDF: 10 pages
Proc. SPIE 5037, Emerging Lithographic Technologies VII, (16 June 2003); doi: 10.1117/12.482343
Show Author Affiliations
XiaoMin Yang, Seagate Technology LLC (United States)
Andrew R. Eckert, Seagate Technology LLC (United States)
Keith Mountfield, Seagate Technology LLC (United States)
Harold Gentile, Seagate Technology LLC (United States)
Carl Seiler, Seagate Technology LLC (United States)
Stanko Brankovic, Seagate Technology LLC (United States)
Robert Harris, Seagate Technology LLC (United States)
Earl Johns, Seagate Technology LLC (United States)

Published in SPIE Proceedings Vol. 5037:
Emerging Lithographic Technologies VII
Roxann L. Engelstad, Editor(s)

© SPIE. Terms of Use
Back to Top