Share Email Print

Proceedings Paper

Sensitivity factors of CAR electron-beam resists
Author(s): David R. Medeiros; Karen E. Petrillo; Gregory Breyta; Wu-Song Huang; Wayne M. Moreau
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Over the years for enhanced resolution, electron beam exposure tools have migrated to higher accelerating potentials. High kV exposure requires faster resist to offset the loss of absorbed radiation. In addition, in order to maintain throughput in mask writing tools, photoresist sensitivities of the order of 5(mu) C/cm2 at 50 kV are needed and likewise 5 (mu) C/cm2 at 100 kV for projection exposure tools. To meet this sensitivity requirement there is a keen interest in using chemically amplified resists (CAR). The CAR resists offer additional benefits such as high contrast, improved resolution, larger process windows, and dry resistance. This study is focused on enhancing the sensitivity of a low activation ketal protected polyhydroxystyrene. One such resist, which has been reported previously, is insensitive to the post apply bake temperature and does not require a post exposure bake. To enhance the resolution, process latitudes, and chemical contrast, base quenchers are usually added to limit the diffusion of the acid after exposure. To improve the sensitivity of the formulation, the effect of the acid generator (AGX), type of base, base concentrations and ratios in combination with the polymer protection level has been studied. Yields of acid formed were measured by titration and NMR. It was also found that both the AGX and base has an inhibition effect on dissolution. By increasing the among of AGX and decreasing the polymer protection level, the sensitivity of the formulation was improved while maintaining the resist contrast, resolution, vacuum stability, and bake latitudes. In addition, the sensitivity of the resist can be altered by quantity and type of added base. We have also investigated the effect of Pka of the base on the sensitivity, and process exposure latitude. The ionic onium acid generators or non ionic hydroxyimides provide adequate acid when coupled with adjusted concentrations of base to achieve 5 (mu) C/cm2 at 100 kV.

Paper Details

Date Published: 24 July 2002
PDF: 11 pages
Proc. SPIE 4690, Advances in Resist Technology and Processing XIX, (24 July 2002); doi: 10.1117/12.474243
Show Author Affiliations
David R. Medeiros, IBM Thomas J. Watson Research Ctr. (United States)
Karen E. Petrillo, IBM Thomas J. Watson Research Ctr. (United States)
Gregory Breyta, IBM Almaden Research Ctr. (United States)
Wu-Song Huang, IBM Microelectronics Div. (United States)
Wayne M. Moreau, IBM Microelectronics Div. (United States)

Published in SPIE Proceedings Vol. 4690:
Advances in Resist Technology and Processing XIX
Theodore H. Fedynyshyn, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?