Architecture overview of cell switch router (CSR), that is one of actual implementation using label switching paradigm, and the CSR prototype system supporting standard ATM interfaces are described. CSR can operate both with PVC (permanent virtual connection) and with SVC (switched virtual connection) as the VC for cut-through packet forwarding. CSR contains cell switch fabric and IP packet switch fabric to achieve high throughput IP forwarding. IP packets are forwarded either through a cut-through packet transmission, in which packet are forwarded without reassembling IP packet nor IP header processing, or through a conventional hop-by-hop IP packet forwarding. This paper describes and proposes the mechanism to forward the connectionless IP packet flows at the CSR. A CSR prototype system has developed. The CSR prototype system uses PVC and SVC connections to transfer the IP packets. With the CSR prototype system, we can make sure that CSR system could establish the cut-through packet transmission path between the adjacent node with acceptable establishment delay, that was less than few hundred second. The SVC connections for cut- through packet transmission are established on demand using ATM Forum UNI 3.0 or UNI 3.1.

Date Published: 6 October 1997
PDF: 9 pages
Proc. SPIE 3233, Broadband Networking Technologies, (6 October 1997); doi: 10.1117/12.290450

Published in SPIE Proceedings Vol. 3233:
Broadband Networking Technologies
Seyhan Civanlar; Indra Widjaja, Editor(s)