Share Email Print

Proceedings Paper

Fiber Bragg gratings in active multimode XLMA fibers for high-power kW-class fiber lasers
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Within the EKOLAS consortium, which is part of the BMBF-funded EffiLAS (Efficient high-performance laser beam sources) research initiative, we are developing fiber Bragg gratings (FBG) directly written into multimode fibers. Fiber lasers are an established beam source for high-power materials processing due to their high efficiency and high average output power at high beam quality. By using FBG as fiber-integrated output mirrors, which is state-of-the-art in singlemode fiber lasers, we aim to reduce the complexity and increase robustness and reliability of multimode fiber resonators. Therefore, we are investigating the use of FBG as outcoupling mirrors in multimode high-power multimode fiber lasers. As a first step, we directly write an FBG into an active extra-large mode area (XLMA) fiber with <100 μm core and use the FBG as low reflective outcoupling mirror for the fiber resonator with simultaneous frequency stabilization. The setup delivers an output power of more than 800 W at 1077 nm. The output power of the system was limited by the pump laser setup and not by the FBG or its temperature. The FBG is passively cooled and the measured temperature of the fiber at the grating is below 130 °C at 800 W output power. As the next step, we set up an active XLMA-fiber (core <100 μm) with an FBG as outcoupling mirror into a laser resonator with water cooling of the resonator fiber and optimized pump coupling. This setup delivers an output power of more than 8 kW at 1077 nm without failure of the FBG.

Paper Details

Date Published: 21 February 2020
PDF: 10 pages
Proc. SPIE 11260, Fiber Lasers XVII: Technology and Systems, 1126025 (21 February 2020); doi: 10.1117/12.2545738
Show Author Affiliations
S. Klein, Fraunhofer-Institut für Lasertechnik ILT (Germany)
M. Giesberts, Fraunhofer-Institut für Lasertechnik ILT (Germany)
P. Baer, Fraunhofer-Institut für Lasertechnik ILT (Germany)
M. Raguse, Fraunhofer-Institut für Lasertechnik ILT (Germany)
O. Fitzau, Fraunhofer-Institut für Lasertechnik ILT (Germany)
M. Traub, Fraunhofer-Institut für Lasertechnik ILT (Germany)
H.-D. Hoffmann, Fraunhofer-Institut für Lasertechnik ILT (Germany)
V. Krause, Laserline GmbH (Germany)
G. Rehmann, Laserline GmbH (Germany)

Published in SPIE Proceedings Vol. 11260:
Fiber Lasers XVII: Technology and Systems
Liang Dong, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?