Share Email Print
cover

Proceedings Paper • new

The assembling of high-resolution microsatellite camera
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

An ultra-high resolution space target detector is essential for the exploration of the outer space of the Earth. The development of high-resolution space target detection system has become the key. All the indicators of the lens designed by ZEMAX can meet the design requirements and meet the imaging quality. However, whether the actual image quality of the assembled machine can meet the image quality requirements of the design often depends on the eccentricity level of the later adjustment, and the eccentricity affects the consistency of the optical axis, resulting in an asymmetrical aberration of the off-axis field of view. The image quality is degraded. However, when the optical system is eccentrically adjusted, the eccentricity of the system needs to be reflected by the underlying lens and amplified continuously, which is not conducive to the analysis of the system eccentricity error. A reasonable set of adjustment methods can improve the overall performance of the ultra-high resolution optical system. During the assembly of the lens group, the center deviation of each mirror surface above the mirror surface will affect the center deviation measurement difference of the mirror surface to be tested. In this paper, based on the reflection center deviation detector, the lens assembly eccentricity model is established, and the vertical axis magnification of the optical system composed of all the mirrors above the mirror surface and the optical system imaging of all the mirror surfaces above the mirror surface are analyzed. After the ball. According to the lens assembly eccentricity model theory, the existing high-resolution spaceborne camera is used to carry out the adjustment analysis, and the adjusted system eccentricity error meets the design requirements, and the MTF at the 110 pm/mm field after the adjustment is measured. The value is 0.35, and the MTF of the 0.6 field of view at 110 lp/mm is 0.3, which basically reaches the theoretical value of the design. The overall assembly adjustment effect is good, which provides a basis for the design and implementation of the optical system's adjustment scheme, and realizes the 25 million-pixel high-resolution imaging of the optical system. This lens assembly eccentricity model effectively controls the optical system eccentricity and improves the optics. The efficiency of the adjustment.

Paper Details

Date Published: 18 December 2019
PDF: 7 pages
Proc. SPIE 11341, AOPC 2019: Space Optics, Telescopes, and Instrumentation, 113410V (18 December 2019); doi: 10.1117/12.2542993
Show Author Affiliations
Yufang Chen, Fujian Normal Univ. (China)
Zhencong Wu, Fujian Normal Univ. (China)
Min Wang, Fujian Normal Univ. (China)


Published in SPIE Proceedings Vol. 11341:
AOPC 2019: Space Optics, Telescopes, and Instrumentation
Suijian Xue; Xuejun Zhang; Carl Anthony Nardell; Ziyang Zhang, Editor(s)

© SPIE. Terms of Use
Back to Top