Share Email Print

Proceedings Paper

Computational fluid dynamics study of displacer "shuttle loss" in miniature Stirling cryocoolers
Author(s): C. S. Kirkconnell; A. Ghavami; S. M. Ghiaasiaan
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

A Stirling cryocooler is under development for small satellites where weight and packaging volume must be minimized while achieving high thermodynamic efficiency. The challenge is exacerbated by the requirement to operate efficiently down to at least 80K. Small size and weight are achieved by operating at a frequency well in excess of the current state of the art, up to and beyond 200 Hz. The efficiency requirement motivates the implementation of a moving Stirling displacer instead of a pulse tube. The latter has the benefit of simplicity, but at the unacceptable expense of thermodynamic efficiency since the expansion power in a pulse tube is dissipated, not recovered as in a Stirling. While using a Stirling displacer avoids several critical loss mechanisms inherent in a pulse tube, it does introduce the “shuttle loss,” which arises from the motion of the displacer within a fixed cylinder/bore. While both the displacer and the bore have nearly linear axial temperature distributions, the relative motion results in instantaneous radial temperature gradients across the clearance gap, which causes heat transfer between the structures. The direction of this heat transfer changes during a cycle, but ultimately “shuttles” heat from the warm end to the cold tip. This paper reports on a computational fluid dynamics (CFD) study aimed at quantifying this loss in the size and frequency range of interest as a function of relevant geometries and piston materials, and assessing its sensitivity to various design parameters. Parametric calculations show that among the various design parameters the overall conductance of the displacer has the most significant effect on the shuttle loss.

Paper Details

Date Published: 11 June 2018
PDF: 11 pages
Proc. SPIE 10626, Tri-Technology Device Refrigeration (TTDR) III, 1062604 (11 June 2018); doi: 10.1117/12.2307862
Show Author Affiliations
C. S. Kirkconnell, West Coast Solutions (United States)
A. Ghavami, Georgia Institute of Technology (United States)
S. M. Ghiaasiaan, Georgia Institute of Technology (United States)

Published in SPIE Proceedings Vol. 10626:
Tri-Technology Device Refrigeration (TTDR) III
Mansoor Sheik-Bahae; Richard I. Epstein; Bjørn F. Andresen; Tonny Benschop; Joseph P. Heremans; Sergey V. Riabzev, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?