Share Email Print

Proceedings Paper

Electrical comparison of iN7 EUV hybrid and EUV single patterning BEOL metal layers
Author(s): Stéphane Larivière; Christopher J. Wilson; Bogumila Kutrzeba Kotowska; Janko Versluijs; Stefan Decoster; Ming Mao; Marleen H. van der Veen; Nicolas Jourdan; Zaid El-Mekki; Nancy Heylen; Els Kesters; Patrick Verdonck; Christophe Béral; Dieter Van den Heuvel; Peter De Bisschop; Joost Bekaert; Victor Blanco; Ivan Ciofi; Danny Wan; Basoene Briggs; Arindam Mallik; Eric Hendrickx; Ryoung-han Kim; Greg McIntyre; Kurt Ronse; Jürgen Bömmels; Zsolt Tőkei; Dan Mocuta
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

The semiconductor scaling roadmap shows the continuous node to node scaling to push Moore’s law down to the next generations. In that context, the foundry N5 node requires 32nm metal pitch interconnects for the advanced logic Back- End of Line (BEoL). 193immersion usage now requires self-aligned and/or multiple patterning technique combinations to enable such critical dimension. On the other hand, EUV insertion investigation shows that 32nm metal pitch is still a challenge but, related to process flow complexity, presents some clear motivations.

Imec has already evaluated on test chip vehicles with different patterning approaches: 193i SAQP (Self-Aligned Quadruple Patterning), LE3 (triple patterning Litho Etch), tone inversion, EUV SE (Single Exposure) with SMO (Source-mask optimization). Following the run path in the technology development for EUV insertion, imec N7 platform (iN7, corresponding node to the foundry N5) is developed for those BEoL layers.

In this paper, following technical motivation and development learning, a comparison between the iArF SAQP/EUV block hybrid integration scheme and a single patterning EUV flow is proposed. These two integration patterning options will be finally compared from current morphological and electrical criteria.

Paper Details

Date Published: 23 March 2018
PDF: 13 pages
Proc. SPIE 10583, Extreme Ultraviolet (EUV) Lithography IX, 105830U (23 March 2018); doi: 10.1117/12.2299389
Show Author Affiliations
Stéphane Larivière, IMEC (Belgium)
Christopher J. Wilson, IMEC (Belgium)
Bogumila Kutrzeba Kotowska, IMEC (Belgium)
Janko Versluijs, IMEC (Belgium)
Stefan Decoster, IMEC (Belgium)
Ming Mao, IMEC (Belgium)
Marleen H. van der Veen, IMEC (Belgium)
Nicolas Jourdan, IMEC (Belgium)
Zaid El-Mekki, IMEC (Belgium)
Nancy Heylen, IMEC (Belgium)
Els Kesters, IMEC (Belgium)
Patrick Verdonck, IMEC (Belgium)
Christophe Béral, IMEC (Belgium)
Dieter Van den Heuvel, IMEC (Belgium)
Peter De Bisschop, IMEC (Belgium)
Joost Bekaert, IMEC (Belgium)
Victor Blanco, IMEC (Belgium)
Ivan Ciofi, IMEC (Belgium)
Danny Wan, IMEC (Belgium)
Basoene Briggs, IMEC (Belgium)
Arindam Mallik, IMEC (Belgium)
Eric Hendrickx, IMEC (Belgium)
Ryoung-han Kim, IMEC (Belgium)
Greg McIntyre, IMEC (Belgium)
Kurt Ronse, IMEC (Belgium)
Jürgen Bömmels, IMEC (Belgium)
Zsolt Tőkei, IMEC (Belgium)
Dan Mocuta, IMEC (Belgium)

Published in SPIE Proceedings Vol. 10583:
Extreme Ultraviolet (EUV) Lithography IX
Kenneth A. Goldberg, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?