Share Email Print

Proceedings Paper

Biomimetic hairy surfaces as superhydrophobic highly transmissive films for optical applications (Conference Presentation)
Author(s): Felix Vuellers; Guillaume Gomard; Jan B. Preinfalk; Efthymios Klampaftis; Matthias Worgull; Bryce S. Richards; Hendrik Hölscher; Maryna N. Kavalenka

Paper Abstract

Combining high optical transmission, water-repellency and self-cleaning is of great interest for optoelectronic devices operating in outdoor conditions, such as photovoltaics where shading can significantly reduce the power output. The surface of water plant Pistia stratiotes combines these functionalities through a dense layer of transparent microhairs. It renders the surface superhydrophobic without affecting absorption of sunlight necessary for photosynthesis. Inspired by this surface, we fabricated a superhydrophobic flexible thin nanofur film made from optical grade polycarbonate using a scalable combination of hot embossing and hot pulling techniques. During fabrication, heated sandblasted steel plates locally elongate softened polymer, thus covering its surface in microcavities surrounded by high aspect ratio micro- and nanohairs. The superhydrophobic nanofur exhibits contact angles of (166±6°), low sliding angles (<6°) and is self-cleaning against various contaminants. The overall transmission of the self-standing nanofur film stands above 85% over the visible range, with 97% of the transmitted light scattered forward. Reflection drops below 4% when coated on a polymeric substrate, which can enhance light extraction in organic light emitting diodes (OLEDs). We report an increase of more than 10% in luminous efficacy for a nanofur coated OLED compared to a bare device. Finally, the nanofur film can be used for enhancing the incoupling of light to solar cells, while additionally providing self-cleaning properties. Optical coupling of the nanofur to a multi-crystalline silicon solar cell results in a 5.8% gain in photocurrent compared to a bare device under normal incidence.

Paper Details

Date Published: 28 April 2017
PDF: 1 pages
Proc. SPIE 10115, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics X, 1011505 (28 April 2017); doi: 10.1117/12.2251461
Show Author Affiliations
Felix Vuellers, Karlsruher Institut für Technologie (Germany)
Guillaume Gomard, Karlsruher Institut für Technologie (Germany)
Jan B. Preinfalk, Karlsruher Institut für Technologie (Germany)
Efthymios Klampaftis, Karlsruher Institut für Technologie (Germany)
Matthias Worgull, Karlsruher Institut für Technologie (Germany)
Bryce S. Richards, Karlsruher Institut für Technologie (Germany)
Hendrik Hölscher, Karlsruher Institut für Technologie (Germany)
Maryna N. Kavalenka, Karlsruher Institut für Technologie (Germany)

Published in SPIE Proceedings Vol. 10115:
Advanced Fabrication Technologies for Micro/Nano Optics and Photonics X
Georg von Freymann; Winston V. Schoenfeld; Raymond C. Rumpf, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?