Share Email Print

Proceedings Paper

Investigation of a wedge adhesion test for edge seals
Author(s): Michael Kempe; John Wohlgemuth; David Miller; Lori Postak; Dennis Booth; Nancy Phillips
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Many photovoltaic (PV) technologies have been found to be sensitive to moisture that diffuses into a PV package. Even with the use of impermeable frontsheets and backsheets, moisture can penetrate from the edges of a module. To limit this moisture ingress pathway from occurring, manufacturers often use a low permeability polyisobutylene (PIB) based edge seal filled with desiccant to further restrict moisture ingress. Moisture ingress studies have shown that these materials are capable of blocking moisture for the 25-year life of a module; but to do so, they must remain well-adhered and free of cracks. This work focuses on adapting the Boeing Wedge test for use with edge seals laminated using glass substrates as part of a strategy to assess the long-term durability of edge seals. The advantage of this method is that it duplicates the residual stresses and strains that a glass/glass module may have when the lamination process results in some residual glass bending that puts the perimeter in tension. Additionally, this method allows one to simultaneously expose the material to thermal stress, humidity, mechanical stress, and ultraviolet radiation. The disadvantage of this method generally is that we are limited by the fracture toughness of the glass substrates that the edge seal is adhered to. However, the low toughness of typical uncrosslinked or sparsely crosslinked PIB makes them suitable for this technique. We present data obtained during the development of the wedge test for use with PV edge seal materials. This includes development of the measuring techniques and evaluation of the test method with relevant materials. We find consistent data within a given experiment, along with the theoretical independence of fracture toughness measurements with wedge thickness. This indicates that the test methodology is reproducible. However, even though individual experimental sets are consistent, the reproducibility between experimental sets is poor. We believe this may be due to inconsistencies in sample history, sample batch, or small changes in sample preparation/assembly from one month to the next. Because the fracture strength of typical edge seal materials is so low, they cannot be relied upon for mechanical strength. A small stress or strain on the edge seal is capable of promoting delamination or tearing causing the edge seal to fail. Because of this, edge seals are very dependent on the processing and construction parameters in the full size PV module such that any long term evaluation of their durability must be conducted on full size modules to be accurate.

Paper Details

Date Published: 26 September 2016
PDF: 15 pages
Proc. SPIE 9938, Reliability of Photovoltaic Cells, Modules, Components, and Systems IX, 993803 (26 September 2016); doi: 10.1117/12.2239161
Show Author Affiliations
Michael Kempe, National Renewable Energy Lab. (United States)
John Wohlgemuth, National Renewable Energy Lab. (United States)
David Miller, National Renewable Energy Lab. (United States)
Lori Postak, Quanex IG Systems, Inc. (United States)
Dennis Booth, Royal Adhesives & Sealants, Inc. (United States)
Nancy Phillips, 3M Corp. (United States)

Published in SPIE Proceedings Vol. 9938:
Reliability of Photovoltaic Cells, Modules, Components, and Systems IX
Neelkanth G. Dhere; John H. Wohlgemuth; Keiichiro Sakurai, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?