Share Email Print

Proceedings Paper

Analytical optimization and test validation of the submicron dimensional stability of the CHEOPS space telescope's CFRP structure
Author(s): L. Blecha; D. Zindel; H. Cottard; T. Beck; V. Cessa; C. Broeg; F. Ratti; N. Rando
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

The CHEOPS (CHaracterising ExOPlanet Satellite), which is an ESA mission developed in cooperation with Switzerland and a number of other member-states, is the first one dedicated to search for transits by means of ultrahigh precision photometry on bright stars already known to host planets. The optical design is based on a Ritchey-Chretien style telescope to provide a de-focussed image of the target stars.

The telescope’s mirrors M1, M2 as well as the focal plane detector are supported by a thermally controlled CFRP structure suspended on isostatic mounts. The dimensional stability of the structural system supporting the optics is a key requirement as it directly impacts the instrument’s accuracy. The M1 and M2 mirrors are supported by a tubular CFRP telescope design which has been optimized by analyses down to carbon fibre layer level with the support of extensive sample test results for model correlation and accurate dimensional stability predictions. This sample characterization test campaign has been conducted on samples with different carbon fibre layups (orientation and stack sequence) to measure accurately the Coefficient of Thermal Expansion (CTE) over a wide temperature range extending from -80°C to +80°C. Using the correlated Finite Element Model, the fibre orientation layup that minimized the relative displacement between the M1 and M2 mirrors, including the consideration of the thermo-elastic contributions of the isostatic mounts on the overall stability of this optical system, has been identified and selected for the baseline design of the CHEOPS Structure.

A dedicated Structural and Thermal Model (STM2), which was then refurbished to a PFM, was manufactured and tested with an ad hoc setup to verify the overall structural stability of the optical train assembly [2]. The relative distance between M1 and M2 was measured under thermal vacuum conditions using laser interferometer techniques. Thermal cycling tests were initially conducted to eliminate and characterize settling effects. Then, the structure’s stability was measured at three stabilised operational temperatures: -5, -10 and -15°C. The thermally induced M1-M2 misalignment on the optical axis was measured to be between -0.156 and -0.168 micron/°C. Relative mirror tilt and lateral centre shifts were also measured. The obtained focal distance, tilt and centre shift stability between mirrors M1 and M2 were all compliant with the system level requirements such that both an STM and PFM model of the CHEOPS CFRP Structure were successfully qualified and delivered in due time for integration on the spacecraft.

Paper Details

Date Published: 22 July 2016
PDF: 9 pages
Proc. SPIE 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, 99121G (22 July 2016); doi: 10.1117/12.2232956
Show Author Affiliations
L. Blecha, Almatech (Switzerland)
D. Zindel, Almatech (Switzerland)
H. Cottard, Almatech (Switzerland)
T. Beck, Univ. Bern (Switzerland)
V. Cessa, Univ. Bern (Switzerland)
C. Broeg, Univ. Bern (Switzerland)
F. Ratti, European Space Agency (Netherlands)
N. Rando, European Space Agency (Netherlands)

Published in SPIE Proceedings Vol. 9912:
Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II
Ramón Navarro; James H. Burge, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?