Share Email Print

Proceedings Paper

HiRes camera and lidar ranging system for the Clementine mission
Author(s): Arno G. Ledebuhr; Joseph F. Kordas; Isabella T. Lewis; Michael J. Richardson; George R. Cameron; W. Travis White III; Douglas W. Dobie; Wesley D. Strubhar; Thomas F. Tassinari; Douglas J. Sawyer; Michael J. Shannon; Lyn D. Pleasance; Albert J. Lieber; Peter Karl Trost; David W. Doll; Michael G. Grote
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Lawrence Livermore National Laboratory developed a space-qualified high resolution (HiRes) imaging LIDAR (light detection and ranging) system for use on the DoD Clementine mission. The Clementine mission provided more than 1.7 million images of the moon, earth, and stars, including the first ever complete systematic surface mapping of the moon from the ultra-violet to near-infrared spectral regions. This article describes the Clementine HiRes/LIDAR system, discusses design goals and preliminary estimates of on-orbit performance, and summarizes lessons learned in building and using the sensor. The LIDAR receiver system consists of a HiRes imaging channel which incorporates an intensified multi-spectral visible camera combined with a laser ranging channel which uses an avalanche photo-diode for laser pulse detection and timing. The receiver was bore sighted to a lightweight McDonnell-Douglas diode-pumped Nd:YAG laser transmitter that emitted 1.06 micrometer wavelength pulses of 200 mJ/pulse and 10 ns pulse-width. The LIDAR receiver uses a common F/9.5 Cassegrain telescope assembly. The optical path of the telescope is split using a color-separating beamsplitter. The imaging channel incorporates a filter wheel assembly which spectrally selects the light which is imaged onto a custom 12 mm gated image intensifier fiber-optically coupled into a 384 multiplied by 276 pixel frame transfer CCD FPA. The image intensifier was spectrally sensitive over the 0.4 to 0.8 micrometer wavelength region. The six-position filter wheel contained 4 narrow spectral filters, one broadband and one blocking filter. At periselene (400 km) the HiRes/LIDAR imaged a 2.8 km swath width at 20-meter resolution. The LIDAR function detected differential signal return with a 40-meter range accuracy, with a maximum range capability of 640 km, limited by the bit counter in the range return counting clock. The imagery from the HiRes is most useful for smaller scale topography studies, while the LIDAR data is used for global terrain and inferred gravity maps.

Paper Details

Date Published: 16 June 1995
PDF: 20 pages
Proc. SPIE 2472, Applied Laser Radar Technology II, (16 June 1995); doi: 10.1117/12.212030
Show Author Affiliations
Arno G. Ledebuhr, Lawrence Livermore National Lab. (United States)
Joseph F. Kordas, Lawrence Livermore National Lab. (United States)
Isabella T. Lewis, Lawrence Livermore National Lab. (United States)
Michael J. Richardson, Lawrence Livermore National Lab. (United States)
George R. Cameron, Lawrence Livermore National Lab. (United States)
W. Travis White III, Lawrence Livermore National Lab. (United States)
Douglas W. Dobie, Lawrence Livermore National Lab. (United States)
Wesley D. Strubhar, Lawrence Livermore National Lab. (United States)
Thomas F. Tassinari, Lawrence Livermore National Lab. (United States)
Douglas J. Sawyer, Lawrence Livermore National Lab. (United States)
Michael J. Shannon, Lawrence Livermore National Lab. (United States)
Lyn D. Pleasance, Lawrence Livermore National Lab. (United States)
Albert J. Lieber, General Atomics (United States)
Peter Karl Trost, General Atomics (United States)
David W. Doll, General Atomics (United States)
Michael G. Grote, McDonnell Douglas Aerospace (United States)

Published in SPIE Proceedings Vol. 2472:
Applied Laser Radar Technology II
Gary W. Kamerman, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?