Share Email Print

Proceedings Paper

Drying and sintering of large SiO2 monoliths
Author(s): Hideaki Murata; Fikret Kirkbir; Douglas Meyers; S. Ray Chaudhuri; Arnab Sarkar
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Sol-gel derived SiO2 glass objects are of interest because of their high purity. However, cracking of wet gels during drying, or of dried gels during hydrocarbon removal and sintering, are the main obstacles preventing the commercialization of this process. These difficulties can be overcome using gels with high strength and large pores. In this study, gels were prepared using Si(OC2H5)4, C2H5OH, H2O and acidic catalysts. The strength, shear modulus, microstructure, drying and sintering behavior of these gels were investigated as functions of catalyst type and aging time. Experiments indicate that the modulus of rupture must be high enough to overcome drying stresses. In addition, the shear modulus must be high enough so that the gels are sufficiently stiff to prevent bending during drying. Repetitive and reliable drying of relatively large gels (D equals 8 - 10 cm, L equals 40 cm) was achieved within a week. However, to obtain crack-free sintered glasses the xerogels must have larger pores (pore radius > 40 angstrom). This is required for easy removal of organic groups at 200 - 500 degree(s)C and of chemically bonded hydroxyl or silanol groups at 800 - 1200 degree(s)C.

Paper Details

Date Published: 13 October 1994
PDF: 8 pages
Proc. SPIE 2288, Sol-Gel Optics III, (13 October 1994); doi: 10.1117/12.189008
Show Author Affiliations
Hideaki Murata, YTC America Inc. (United States)
Fikret Kirkbir, YTC America Inc. (United States)
Douglas Meyers, YTC America Inc. (United States)
S. Ray Chaudhuri, YTC America Inc. (United States)
Arnab Sarkar, YTC America Inc. (United States)

Published in SPIE Proceedings Vol. 2288:
Sol-Gel Optics III
John D. Mackenzie, Editor(s)

© SPIE. Terms of Use
Back to Top