Share Email Print
cover

Proceedings Paper

Grinding/polishing/figuring machine for large mirrors of milliarcsecond x-ray telescopes of 21st century
Author(s): Bengre Narayana Karkera
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

A milliarcsecond x-ray telescope can image stars and can observe galaxies with resolution matching radio astronomy--opening the door to fundamental discoveries. The convenient milliarcsecond x-ray optic is a paraboloid mirror with a graze angle close to half degree and with 0.1 arc sec tolerance. For a reasonable plate scale, the cross sectional radius of the paraboloid should be about 5 - 10 meters. The glass substrate, looking near cylindrical, is prepared by cementing together 36 segments of 10 degree each. This is placed in the machine with its axis horizontal. Accurate positioning of the substrate is possible, using positron sensors and positioning pads at 5 locations. The substrate is supported all along its circumference, to compensate for the gravity effects. Along the axis, the focus point of the desired paraboloid is rigidly located for regular use throughout the prolonged period of mirror making. By 4 carefully chosen random motions of the tool and the substrate, it is possible to derive the desired paraboloid surface. The image at the focus is used to test the surface errors. For this, a test-parallel beam of light is generated using the same paraboloid mirror in combination with a flat reflector. At the end, the glass substrate is transformed into a vacuum chamber, and a multi-layer, thin film coating is deposited on the mirror surface.

Paper Details

Date Published: 1 June 1994
PDF: 11 pages
Proc. SPIE 2199, Advanced Technology Optical Telescopes V, (1 June 1994); doi: 10.1117/12.176261
Show Author Affiliations
Bengre Narayana Karkera, Bhabha Atomic Research Ctr. (India)


Published in SPIE Proceedings Vol. 2199:
Advanced Technology Optical Telescopes V
Larry M. Stepp, Editor(s)

© SPIE. Terms of Use
Back to Top