The Moscone Center
San Francisco, California, United States
2 - 7 February 2019
Product Demonstrations
Tuesday
5 February 2019
Polaris-M Software Demonstration
Presenter: Morgan Harlan and Kyle Hawkins, Airy Optics, Inc. (United States)
Date: Tuesday 5 February 2019
Time: 10:30 AM - 11:00 AM
Location: Demo Area 1 (Hall ABC South)
Airy Optics provides Polarization Optical Design software and analysis services utilizing Polaris-M platform for polarization 3D ray tracing. Polaris-M is for targeted to solve polarization problems!
MY POLYMERS - New Insights on UV Curing, Degree of Cure, and Oxygen Inhibition
Presenter: Ron Zohar, MY POLYMERS LTD. (Israel)
Date: Tuesday 5 February 2019
Time: 11:00 AM - 11:30 AM
Location: Demo Area 2 (Hall EF North)
A new approach for measuring Degree of UV Curing, which is more sensitive than FTIR. Review of the Oxygen Inhibition problem in UV curing; Methods, and new products to overcome O2 inhibition.
How to use Ibsen Photonics' free spectrometer design tool
Presenter: Dr. Thomas Rasmussen, Ibsen Photonics (Denmark)
Date: Tuesday 5 February 2019
Time: 11:30 AM - 12:00 PM
Location: Demo Area 1 (Hall ABC South)
In this product demonstration you will get an introduction to the Ibsen Photonics' spectrometer design software. With this tool you can quickly evaluate the feasibility of various spectrometer designs.
Photonics Packaging - Empowering IoT and Beyond
Presenter: Evan Hueners, Palomar Technologies (United States)
Date: Tuesday 5 February 2019
Time: 12:00 PM - 12:30 PM
Location: Demo Area 2 (Hall EF North)
Presenting a case study about the optimization to cost-effectively manufacture photonics device driving the connected world, as well as Palomar’s suite of solutions for photonics package assembly.
Introducing SMD series mini-spectrometer which is the smallest grating-based spectrometer
Presenter: Dana Hinckley, Hamamatsu Corp. (United States)
Date: Tuesday 5 February 2019
Time: 12:30 PM - 1:00 PM
Location: Demo Area 1 (Hall ABC South)
SMD series mini-spectrometers are grating-based SWNIR spectral sensor heads fabricated through MOEMS.
LS-Lab, the micromachining setup dedicated to R&D Centers and Universities
Presenter: Paul-Etienne Martin, LASEA (Belgium)
Date: Tuesday 5 February 2019
Time: 1:00 PM - 1:30 PM
Location: Demo Area 2 (Hall EF North)
This small lab setup, combined with LASEA’s beam management modules and a pico- or femto-second laser, allows performing high precision processes with the flexibility of an open setup.
VSim for Photonic Simulations
Presenter: John Cary, Tech-X Corporation (United States)
Date: Tuesday 5 February 2019
Time: 1:30 PM - 2:00 PM
Location: Demo Area 1 (Hall ABC South)
We will present our product VSim: how one sets up a simulation, runs it and analyses the results.
High Power Blue Lasers for Spatter-free Material Processing
Presenter: Jean-Michel Pelaprat, NUBURU Inc. (United States)
Date: Tuesday 5 February 2019
Time: 2:00 PM - 2:30 PM
Location: Demo Area 2 (Hall EF North)
We will describe the performance of high power blue laser up to 500W, their benefits for metal processing, and show basic spatter-free application for Cu, AL, SS and dissimilar metals.
Higher resolution and faster framerate with CoaXPress 2.0
Presenter: Sean Pologruto, Basler (United States)
Date: Tuesday 5 February 2019
Time: 2:30 PM - 3:00 PM
Location: Demo Area 1 (Hall ABC South)
The demand for higher resolution and faster framerate drives CPU load and leads to bandwidth bottlenecks. To overcome the challenge, new camera architecture is necessary. It's here with CoaXPress 2.0.
New Senop HSC-2 Hyperspectral Camera. Product launch and introduction
Presenter: Dr Jussi Rautiainen, Senop Oy (Finland)
Date: Tuesday 5 February 2019
Time: 3:00 PM - 3:30 PM
Location: Demo Area 2 (Hall EF North)
New Senop HSC-2 Hyperspectral camera has born! Product Manager, Dr. Jussi Rautiainen will introduce the camera and science behind it.
Picosecond Green Fiber Laser
Presenter: Shibin Jiang, AdValue Photonics (United States)
Date: Tuesday 5 February 2019
Time: 3:30 PM - 4:00 PM
Location: Demo Area 1 (Hall ABC South)
Our industrial OEM ps Green laser is a very capable tool for high precision laser micro processing, applicable to glass, ceramics, composites, and polymers.
ScannerMAX Optical Scanning Systems
Presenter: William R. Benner Jr. , Pangolin Laser Systems, Inc. (United States)
Date: Tuesday 5 February 2019
Time: 4:30 PM - 5:00 PM
Location: Demo Area 1 (Hall ABC South)
Stronger, Cooler, Faster - ScannerMAX specializes in the development and production of high speed, high performance, galvanometer based optical scanning systems.
Wednesday
6 February 2019
Additive Manufacturing by Two-Photon Polymerization for Prototyping, Tooling and Production
Presenter: Martin Hermatschweiler, Nanoscribe GmbH (Germany)
Date: Wednesday 6 February 2019
Time: 10:30 AM - 11:00 AM
Location: Demo Area 1 (Hall ABC South)
Learn more about the new features of Nanoscribe´s highest resolution 3D printers for nano- and microfabrication. They combine additive manufacturing and maskless lithography in one device.
Beam Shifter XPR-25 (Extended Pixel Resolution)
Presenter: Krister Magnusson, Optotune Switzerland AG (Switzerland)
Date: Wednesday 6 February 2019
Time: 11:00 AM - 11:30 AM
Location: Demo Area 2 (Hall EF North)
Besides being a novel imaging device for projectors, the XPR-25 beam shifter may promise equally disruptive use for additive manufacturing, metrology structured lightning, camera super resolution etc.
Introducing the CELESTA Light Engine
Presenter: Iain Johnson, Lumencor, Inc. (United States)
Date: Wednesday 6 February 2019
Time: 11:30 AM - 12:00 PM
Location: Demo Area 1 (Hall ABC South)
Survey of the control functionality and light output characteristics of the CELESTA light engine, with 7 independently addressable 1000 mW diode laser sources controlled by an onboard microprocessor.
Taiko PDL M1, a smart picosecond laser diode driver
Presenter: Guillaume Delpont, PicoQuant GmbH (United States)
Date: Wednesday 6 February 2019
Time: 12:00 PM - 12:30 PM
Location: Demo Area 2 (Hall EF North)
We will present our smart picosecond laser diode driver Taiko PDL M1 that can monitor crucial parameters, including emission wavelength, temperature, repetition rate, and output optical power (in W).
High performance VIS-NIR beam splitters by plasma assisted depositions technologies
Presenter: Christian Katzer, Optics Balzers (United States)
Date: Wednesday 6 February 2019
Time: 12:30 PM - 1:00 PM
Location: Demo Area 1 (Hall ABC South)
Beam splitters separating different parts of the light spectrum are a crucial component in many optical systems. High performance filters including the Sentinel 2 beam splitter will be presented.
Laser Projection & Bio Analytics Despeckler & RARe Motheye Fiber
Presenter: Devinder Saini or Ron Mehl, Fiberguide Industries (United States)
Date: Wednesday 6 February 2019
Time: 1:00 PM - 1:30 PM
Location: Demo Area 2 (Hall EF North)
Devinder Saini will introduce a product fit for laser projection and bio analytics, Fiberguide's Despeckler; We will also discuss our broadband anti-reflective solution, RARe Motheye Fiber.
Continuously Variable Filters for Applications in Spectroscopy, HSI and Fluorescence Diagnostics
Presenter: Oliver Pust, Delta Optical Thin Film A/S (Denmark)
Date: Wednesday 6 February 2019
Time: 1:30 PM - 2:00 PM
Location: Demo Area 1 (Hall ABC South)
Continuously variable filters offer new possibilities for applications in spectroscopy, hyperspectral imaging and fluorescence diagnostics. Principles, features and benefits will be exemplified.
High-resolution SWIR wavefront sensing from 0.9 to 2.35 µm applied to laser and optics testing
Presenter: Valentin Genuer, Phasics Corp. (United States)
Date: Wednesday 6 February 2019
Time: 2:00 PM - 2:30 PM
Location: Demo Area 2 (Hall EF North)
Discover how SID4-SWIR-HR can fully characterize 1.55µm laser sources, as well as SWIR assemblies and lenses used in free space optical communications, aerospace instruments and defense night vision.
How you can use in-camera features to reduce costs and boost performance
Presenter: Sean Pologruto, Basler (United States)
Date: Wednesday 6 February 2019
Time: 2:30 PM - 3:00 PM
Location: Demo Area 1 (Hall ABC South)
In-camera features preprocess the image data in the camera, creating a higher quality image and optimizing the bandwidth usage. We'll show you five essential features that improve your system.
Hybrid assembly of Photonic Integrated Circuits
Presenter: Arne Leinse, LioniX International (Netherlands)
Date: Wednesday 6 February 2019
Time: 3:00 PM - 3:30 PM
Location: Demo Area 2 (Hall EF North)
We show examples of Hybrid assembly of PICs, expanding the capabilities of photonic integration. We demonstrate a narrow linewidth tunable lasers and an integrated VCSEL on Biophotonics sensor.
Mastering the light spectrum for tomorrow's technologies
Presenter: John Freiermuth, Optics Balzers (United States)
Date: Wednesday 6 February 2019
Time: 3:30 PM - 4:00 PM
Location: Demo Area 1 (Hall ABC South)
Optics within potentially disruptive technologies for automotive, augmented reality and other applications.
Thursday
7 February 2019
Advanced Thermal Management Solutions for High Power Laser Applications
Presenter: Kim Fikse, Advanced Cooling Technologies (United States)
Date: Thursday 7 February 2019
Time: 10:30 AM - 11:00 AM
Location: Demo Area 1 (Hall ABC South)
Thermal management technologies help deliver high performance solutions in high powered devices. Join us to learn about active pumped, passive heat pipe and thermal storage solutions from ACT.
LiDAR Systems Inspired by SCHOTT BOROFLOAT® 33
Presenter: Mike Hardbarger, SCHOTT North America Inc. (United States)
Date: Thursday 7 February 2019
Time: 11:30 AM - 12:00 PM
Location: Demo Area 1 (Hall ABC South)
SCHOTT BOROFLOAT® 33 combines superior quality, excellent flatness with outstanding thermal, optical, chemical and mechanical features, a perfect specialty glass solution for advanced LiDAR systems.
Optimizing Illumination: Lasers over LEDs
Presenter: Mark LaPlante, 89 North (United States)
Date: Thursday 7 February 2019
Time: 12:30 PM - 1:00 PM
Location: Demo Area 1 (Hall ABC South)
Lasers offer many advantages over LEDs when designing fluorescence illumination systems. This talk will review common issues and clear insights for how to improve your optical illumination system.
Corning Varioptic lenses for demanding variable focus requirements
Presenter: Glenn-Iv Plaine, Corning Incorporated (United States)
Date: Thursday 7 February 2019
Time: 1:00 PM - 1:30 PM
Location: Demo Area 2 (Hall EF North)
Corning® Varioptic® Lenses rely on the electrowetting principle, and provide market leading adjustable lens solution for industrial applications.
Meet with the new INFRATEST electro optical testing software!
Presenter: Stephen Scopatz, Electro Optical Industries (United States)
Date: Thursday 7 February 2019
Time: 1:30 PM - 2:00 PM
Location: Demo Area 1 (Hall ABC South)
A revolutionary software full of new possibilities: - Wide Field Of View camera testing made simple and accurate - Automatic control of liquid cooled Blackbodies - Background temperature simulation
;