Opto Diode Corp.

Booth: 5228

About

Supplier of industry-leading standard & custom-designed sensors, photodiodes, IR detectors, photonic modules, assemblies, & high-performance LEDs (covering 265-940 nm) & IR emitters (from 1-10 µm). We offer advanced performance sensors from the extreme ultraviolet (UV) to the mid-infrared (mid-IR), providing unparalleled high-energy particle, electron, X-ray, and UV detection along with superior sensitivity to discriminate trace gases or detect heat, sparks, or flames in the mid-IR spectrum.
Show full description +

Contact

Opto Diode Corp.
1260 Calle Suerte
Camarillo, CA
United States
93012
Website: www.optodiode.com

Announcements

11 December 2017
Opto Diode Introduces 13.5 nm Directly-Deposited Thin-Film Filter Photodetectors - SXUV100TF135 / 135B
CAMARILLO, Calif. - Opto Diode Corporation, an ITW company, introduces the SXUV100TF135 and SXUV100TF135B photodiodes with integrated thin-film filters. The detectors each feature a 100 mm2 active area and a directly-deposited thin-film filter for detection between 12 nm and 18 nm. Both detectors have typical responsivity of 0.09 A/W at 13.5 nm and are optimized for different electrical performance. The photodiodes are ideal for use in applications such as laser power monitoring, semiconductor photolithography, and metrology systems that utilize extreme ultraviolet light. The SXUV100TF135 model is optimized for higher speed reverse bias voltage operation. The device has low capacitance, typically 260 pF, with a reverse bias voltage of 12 volts. The SXUV100TF135B is optimized for zero bias voltage operation where low dark current is of paramount importance. The detector has a high shunt resistance greater than 10 MΩ. Opto Diode’s photodiodes with integrated thin-film filters offer superior stability and a robust design for use in extreme ultraviolet environments. Operating and storage temperatures range from -10 °C to +40 °C in ambient environments and from -20 °C to +80 °C in nitrogen or vacuum environments. Both devices are shipped with protective covers. For more information about integrated thin-film filters, other photodiode packages, and optical filter assemblies, please email sales@optodiode.com or visit: http://optodiode.com/photodiodes-filter.html. ABOUT THE COMPANY: Opto Diode Corporation (Camarillo, CA - www.optodiode.com), an ITW Company, delivers industry-leading sensors, photodiodes, IR detectors, photonic modules, assemblies, and LEDs. Available in standard and custom designs, Opto Diode products have earned a reputation for high performance, superior quality and reliability for over 30 years. Opto Diode offers advanced performance sensors from the extreme ultraviolet (UV) to the mid-infrared (mid-IR). Our products provide unparalleled high-energy particle, electron, X-ray, and UV detection along with superior sensitivity to discriminate trace gases or detect heat, sparks, or flames in the mid-IR spectrum. Other products include high performance LEDs with radiometric emissions from 365 to 940 nm and IR emitters covering 1 to 10 microns. Opto Diode serves a variety of industries including aerospace, automotive, biotechnology, food processing, medical, military/defense, industrial, semiconductor equipment manufacturing, and test & measurement. Our manufacturing process is in a cleanroom environment, from start to finish. Opto Diode’s domestic U.S. facility is optimized for design and manufacturing with an on-site wafer fabrication, class 1,000 to class 10,000 clean rooms, extensive assembly capabilities and packaging expertise. From prototyping to high-volume production, we manufacture wafers-to-components then package and assemble photonic modules-to-optoelectronic sub-systems. For more information, visit www.optodiode.com. OPTO DIODE CORPORATION An ITW Company 1260 Calle Suerte Camarillo, CA 93012 Contact: Russell Dahl, Business Unit Manager Phone: 805-499-0335 x312 Fax: 805-499-8108 E-mail: russdahl@optodiode.com Web Site: www.optodiode.com Submitted by Media Contact: Marlene Moore Smith Miller Moore Phone: 818-708-1704 Email:marlene@smithmillermoore.com
13 October 2017
Opto Diode Introduces Deep Red Surface-Mount LED - OD-685C LED
CAMARILLO, Calif. - Opto Diode Corporation, an ITW company, introduces a deep red, surface-mount device (SMD) light-emitting diode (LED) that delivers exceptional efficiency for biological analysis, health, science, medical, and veterinary applications. OD-685C LED features 2.0mW of radiant power at a forward current of 20mA, peak wavelength of 685nm, and radiant efficiency of 56 percent. Typical applications require radiometric measurement with tight spectral bandwidth. The rugged new surface-mount device is fully operational within a very wide temperature range from -40 °C to +125 °C, making it ideal for use in harsh environmental conditions. The forward voltage of the OD-685C is typically 1.8V with a maximum of 2.2V. The spectral bandwidth at 50 percent is 30 nm. For higher optical power the device may be operated with total power dissipation at 110 mW and continuous forward current at 50 mA or with the peak forward current (at 10µSec @ 300 Hz) at 100 mA. Opto Diode’s expanding product lines will include several surface-mount devices to be introduced in 2017. For added convenience and affordability, the OD-685C samples are available on tape and reel. The new deep red SMD LED is RoHS and REACH compliant. To learn more about Opto Diode’s OD-685C and/or OD-2438, please visit www.optodiode.com or call sales today at (805) 465-8700.
13 October 2017
Opto Diode Introduces Near-Infrared, Surface-Mount Detector - NXIR-RF100C
CAMARILLO, Calif. - Opto Diode Corporation, an ITW company, introduces the NXIR-RF100C, a red and near-infrared (NIR) enhanced, reduced-footprint, surface-mount device (SMD) photodiode. Designed for a wide variety of applications, the new photodetector has spectral response from 320 to 1100 nm and can be used for laser-monitoring, rain, and sun-sensor applications. The rugged package is designed specifically for environments requiring extended temperature range from -40 °C to +125 °C and has an anti-reflective (AR) coated window that provides greater than 98 percent transmission. The new SMD expands the company’s popular high-performance, through-hole photodiode packages, allowing designers to reduce space and cost. The NXIR-RF100C has an active area of 1 mm2 in a small 3 mm x 3.5 mm surface-mount package. The new device has high responsivity of 0.62 A/W @ 850 nm and 0.35 A/W @ 1064 nm. It also has low capacitance of 3 pico-farads (pF) at 0 volts, high shunt resistance, greater than 200 MΩ, and very low dark current at 0.1nA. Opto Diode’s NXIR-RF100C detectors are available in high volume on tape and reel. For more information on the new NIR, surface-mount NXIR series of photodetectors, or for volume pricing quotes, please contact: sales@optodiode.com. Please visit Opto Diode’s booth # 5628 at Photonics West 2017, San Francisco, to learn more about the NXIR-RF100C and the expanded line of NXIR products. # # #
13 October 2017
Opto Diode’s New NXIR-5C, Red to Near-IR Enhanced Surface-Mount Photodiode
CAMARILLO, Calif. - Opto Diode Corporation, an ITW company, introduces the NXIR-5C, a red to near-infrared (NIR) enhanced photodiode with a circular active area of 5 mm2. With a spectral response from 320 nm to 1100 nm, the rugged photodiode is housed in a custom 4.7 mm x 4.9 mm ceramic carrier surface-mount device (SMD) package. The new SMD joins the company’s popular NXIR family of products that is optimized for the near-infrared spectrum. The NXIR-5C provides superior responsivity with low reverse bias and high sensitivity at 0.62 A/W @ 850 nm and 0.35 A/W at 1064 nm. It has low dark current at 1nA, low capacitance of 5 pico-farads (pF) at 10 volts, and high shunt resistance greater than 100 MΩ. The NIR-enhanced detector is specially designed for laser monitoring, medical diagnostic equipment, industrial automation, scientific measurement, and military applications which require a wide operating temperature range from -40 degrees C to +125 degrees C. The robust package features an AR-coated window that provides greater than 98% transmission. The SMD is compliant with RoHS and REACH standards and is available on tape and reel. To learn more about the company’s expanding NXIR family of products that allows designers to meet challenging photonic requirements, including reducing space and cost, or to get volume pricing quotes, please contact sales@optodiode.com.
13 October 2017
Opto Diode Presents BXT2-17TF - Two-Stage, Cooled, Packaged Infrared (IR) Detector
CAMARILLO, Calif. - October 16, 2017 - Opto Diode Corporation, an ITW company, presents the BXT2-17TF, a single-channel, infrared (IR) detector with an integrated 4.67 µm optical bandpass silicon filter. The high-performance lead selenide (PbSe) cooled device provides excellent sensitivity for industrial carbon monoxide (CO) detection in harsh environments. The two-stage, thermoelectrically-cooled, packaged device with integrated thermistor joins Opto Diode’s B-Series IR detectors, all of which feature excellent performance and high reliability for long life. The BXT2-17TF provides additional sensitivity for low-level-emissions detection and enhanced temperature stability for use in harsh environments where temperatures are in constant flux. The device has minimum responsivity of 1.2 x 105 V/W with the active-element temperature controlled to -30 °C. Housed in a standard TO37 can, the unit has a 2 mm² active area. Absolute ratings for storage and operating temperatures range from -40 °C to +85 °C. Additional uses include carbon monoxide gas analysis, environmental monitoring, process control systems, and industrial burner monitoring and control. For more information about the two-stage, cooled IR detector, please contact sales@optodiode.com or visit: http://optodiode.com/ir-detectors-bxt2-series.html. OPTO DIODE CORPORATION An ITW Company 1260 Calle Suerte Camarillo, CA 93012 Contact: Russell Dahl, Business Unit Manager Phone: 805-499-0335 x312 Fax: 805-499-8108 E-mail: russdahl@optodiode.com Web Site: www.optodiode.com Submitted by Media Contact: Marlene Moore Smith Miller Moore Phone: 818-708-1704 Email:marlene@smithmillermoore.com
15 December 2017
Opto Diode Introduces 13.5 nm Directly-Deposited Thin-Film Filter Photodetectors
CAMARILLO, Calif. - Opto Diode Corporation, an ITW company, introduces the SXUV100TF135 and SXUV100TF135B photodiodes with integrated thin-film filters. The detectors each feature a 100 mm2 active area and a directly-deposited thin-film filter for detection between 12 nm and 18 nm. Both detectors have typical responsivity of 0.09 A/W at 13.5 nm and are optimized for different electrical performance. The photodiodes are ideal for use in applications such as laser power monitoring, semiconductor photolithography, and metrology systems that utilize extreme ultraviolet light. The SXUV100TF135 model is optimized for higher speed reverse bias voltage operation. The device has low capacitance, typically 260 pF, with a reverse bias voltage of 12 volts. The SXUV100TF135B is optimized for zero bias voltage operation where low dark current is of paramount importance. The detector has a high shunt resistance greater than 10 MΩ. Opto Diode’s photodiodes with integrated thin-film filters offer superior stability and a robust design for use in extreme ultraviolet environments. Operating and storage temperatures range from -10 °C to +40 °C in ambient environments and from -20 °C to +80 °C in nitrogen or vacuum environments. Both devices are shipped with protective covers. For more information about integrated thin-film filters, other photodiode packages, and optical filter assemblies, please email sales@optodiode.com or visit: http://optodiode.com/photodiodes-filter.html. ABOUT THE COMPANY: Opto Diode Corporation (Camarillo, CA - www.optodiode.com), an ITW Company, delivers industry-leading sensors, photodiodes, IR detectors, photonic modules, assemblies, and LEDs. Available in standard and custom designs, Opto Diode products have earned a reputation for high performance, superior quality and reliability for over 30 years. Opto Diode offers advanced performance sensors from the extreme ultraviolet (UV) to the mid-infrared (mid-IR). Our products provide unparalleled high-energy particle, electron, X-ray, and UV detection along with superior sensitivity to discriminate trace gases or detect heat, sparks, or flames in the mid-IR spectrum. Other products include high performance LEDs with radiometric emissions from 365 to 940 nm and IR emitters covering 1 to 10 microns. Opto Diode serves a variety of industries including aerospace, automotive, biotechnology, food processing, medical, military/defense, industrial, semiconductor equipment manufacturing, and test & measurement. Our manufacturing process is in a cleanroom environment, from start to finish. Opto Diode’s domestic U.S. facility is optimized for design and manufacturing with an on-site wafer fabrication, class 1,000 to class 10,000 clean rooms, extensive assembly capabilities and packaging expertise. From prototyping to high-volume production, we manufacture wafers-to-components then package and assemble photonic modules-to-optoelectronic sub-systems. For more information, visit www.optodiode.com. # # #
PREMIUM CONTENT
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?
close_icon_gray