SPIE Startup Challenge 2015 Founding Partner - JENOPTIK Get updates from SPIE Newsroom
  • Newsroom Home
  • Astronomy
  • Biomedical Optics & Medical Imaging
  • Defense & Security
  • Electronic Imaging & Signal Processing
  • Illumination & Displays
  • Lasers & Sources
  • Micro/Nano Lithography
  • Nanotechnology
  • Optical Design & Engineering
  • Optoelectronics & Communications
  • Remote Sensing
  • Sensing & Measurement
  • Solar & Alternative Energy
  • Sign up for Newsroom E-Alerts
  • Information for:
    Advertisers
SPIE Startup Challenge 2015 Lead Sponsor - HAMAMATSU

CASIS

SPIE Photonics West 2015 | Register Today

Nobel Laureate - Shuji Nakamura's Biography

SPIE PRESS




Print PageEmail PageView PDF

Astronomy

Faster production of high-quality telescope mirrors

Novel polishing techniques on pre-cut segments may speed the manufacture of aspheric mirrors for large telescopes.
9 April 2013, SPIE Newsroom. DOI: 10.1117/2.1201304.004794

Large-aperture telescopes use multiple segmented mirrors, which require grinding and polishing to achieve a specific surface-form. There is growing demand worldwide for high-precision, nanometer-level control of surfaces to manufacture these mirrors on an increasing scale. However, current production processes are slow. The UK National Facility for Ultra-Precision Surfaces, which is operated by Glyndŵr University and partnered with University College London and Zeeko Ltd, has developed a novel, faster process to manufacture prototype high-specification mirror segments for the European Extremely Large Telescope (E-ELT).

The E-ELT, an optical/infrared telescope, will have a 39.3m diameter primary mirror comprising 798 hexagonal segments, each off-axis aspheric (i.e., with a surface profile that has non-spherical aspects). In total, the telescope requires 931 segments, providing one spare of each design. Our challenge is to meet the technical specification with an unprecedented production schedule of one segment every few days. The segments require a wavefront of tens of nanometers, an edge-roll (where pressure from the traditional polishing tool causes the edge to be rounded) of <100nm, and the dimensions necessary to create the aspheric shape.

Unlike other segment manufacturers, we grind, smooth, and polish on segments pre-cut to the final hexagonal shape. This was previously considered impractical, as the issue of edge-roll was insurmountable. Conventionally, segments are processed as round blanks, until the manufacturer has reduced form errors to less than a micron in size, and can cut the segments into hexagonal shapes. Unfortunately, this process warps the surface. Finishing by ion-figuring in vacuum (involving a high-precision beam to remove material from the mirror's surface) preserves the edges, but is slow.

We saw that using pre-cut segments simplified the process-flow and minimized manual interventions. Cutting—with its own risks—is performed before value is added to the blank, and avoids the need for ion-figuring.

To address the problem of edge-roll, we developed the process on subscale parts, deploying a variety of techniques. These included bonnets furnished with polishing cloth or pitch and used with cerium oxide abrasive, or a brass button working with more aggressive abrasives. We performed the work on our 1.2m Zeeko Computer Numerical Control (CNC) polishing machine. Bonnet polishing used the tool-lift method, where the bonnet is progressively raised or lowered, delivering polishing spots of variable size and giving effective edge-control.1–3 We then built full-scale production equipment, including the first 1.6m Zeeko machine, to develop the process (see Figure 1). Glyndŵr designed and operated a 10m test tower to surround the machine, enabling full-aperture null interferometry, or measuring of the entire surface area (see Figure 2). We could then measure the segments in situ, further minimizing handling. The E-ELT project requires an independent test of base radius and conic constant, so Glyndŵr has developed a scanning pentaprism profilometer—deployable in the lab, or on the bridge of the Zeeko machine—for measuring segments in situ. (see Figure 3).


Figure 1. The Zeeko IRP 1600 machine, being used to polish one of the prototype segments for the European Extremely Large Telescope.

Figure 2. A 10m test tower designed and built by Glyndŵr University around the IRP 1600 machine. The tower enabled full-aperture interferometry, for accurate surface measurements.

Figure 3. Performing a measurement in situ using a specially developed pentaprism profilometer mounted on the Zeeko IRP 1600.

The first mirror manufactured on the 1.6m machine was the master spherical segment (MSS). We characterized this over-sized mirror (1.45m across corners), using rotations and shearing to decouple test from surface errors. Polishing stopped when the surface met requirements for the master:−16.8±2nm root mean square (RMS) surface, 5.5nm RMS for spatial scales <250mm, and 4.2nm RMS for scales 4). We test aspheric segments differentially with respect to the MSS. This is necessary so that all the segments in the eventual telescope, to be manufactured over six years, will be consistent and bring light to a common focus.


Figure 4. Phase maps of the master spherical segment after form corrections.

We aspherically ground the first segment, SPN01, to about 10 microns peak-to-valley (PV) form error on the BoX CNC grinder at Cranfield University. In the Zeeko process, we circulated a conditioned abrasive slurry onto to the work-piece. This caused the first problem: the slurry settled on the surface, increasing the local removal rate, and in the machine, decreasing the global removal rate. Enlarging the slurry tank and increasing the delivery rate resolved the problem. The second challenge was more subtle. For CNC polishing to converge, the coordinate systems for the part's surface, the CNC machine axes, and the metrology data must all coincide. In the early days we had discrepancies, which meant that we polished in the wrong places. The third issue was removing mid-spatials (surface errors) from CNC grinding, requiring an effective smoothing process suitable for an aspherical surface.4, 5

Having rectified these issues, we polished SPN01 to about the same specification as the MSS, but with good edges. We then recalibrated the optical configuration, and improved the thermal environment of the test tower to accommodate changes in surrounding temperature (which might otherwise affect the test result). We BoX-ground SPN04, and it is currently on the Zeeko machine. On this segment, BoX delivered 30 microns PV input form-error, which we have since successfully corrected with CNC polishing. The current status is 136nm RMS to the extreme edge, with excellent form convergence and edge definitions (see Figure 5).


Figure 5. Comparison of work progress on the ‘SPN01’ and ‘SPN04’ segments. The curves show the root mean square (RMS) value of surface errors of the two prototype segments after each correction. Work on SPN01 is near completion and the data is actual. Work on SPN04 is still in progress, so that both actual and predicted data are presented.

The largest number of meter-class mirror segments made anywhere for an optical telescope is 36, and these were made by running a prototype manufacturing process 36 times. Worldwide, there is a gulf between today's manufacturing for off-axis aspheres, and tomorrow's mass-production requirements. We are now working to further speed and automate the process chain and so close this gap. Under an intensive program, we are developing the actual corrective polishing and smoothing processes, the metrology methods, and, importantly, the computational techniques required for analyzing and interpreting metrology data and computing tool-paths to improve form. In parallel, we are estimating the machines and support facilities required for mass production and developing the factory layout for an effective work-flow.

Meanwhile, we are investigating the wider markets for meter-scale optics, including high-power laser systems, remote sensing, space astronomy, and photolithography. We are looking to create a manufacturing base in North Wales and to stimulate the supply chain.

The author gratefully acknowledges financial support from the UK Engineering and Physical Sciences Research Council, the Science and Technology Facilities Council, the Welsh Government, and Glyndŵr University, through which the National Facility for Ultra-precision Surfaces was established and developed. The Facility is operated in collaboration with University College London and Zeeko Ltd, and the generous level of industrial and technical input by Zeeko is particularly recognized. Prototype segment fabrication is financed in part by a contract from the European Southern Observatory.


David Walker
Glyndŵr University
St Asaph, United Kingdom
and
University College London (UCL)
London, United Kingdom
and
Zeeko Ltd
Coalville, United Kingdom

David Walker is research professor at UCL, professor of optics at Glyndŵr University, and a founder and research director of Zeeko Ltd. He leads R&D on fast manufacture of prototype, hexagonal, off-axis mirror segments for the E-ELT, and is also promoting wider applications of the technology.


References:
1. H. Li, D. Walker, G. Yu, A. Sayle, W. Messelink, R. Evans, A. Beaucamp, Edge control in CNC polishing, paper 2: simulation and validation of tool influence functions on edges, Opt. Express 21, p. 370-381, 2013.
2. D. Walker, G. Yu, H. Li, W. Messelink, R. Evans, A. Beaucamp, Edges in CNC polishing: from mirror-segments towards semiconductors, paper 1: edges on processing the global surface, Opt. Express 20, p. 19787-19798, 2012.
3. H. Li, G. Yu, D. Walker, R. Evans, Modeling and measurement of polishing tool influence functions for edge control, J. Eur. Opt. Soc. 6, p. 11044, 2011.
4. G. Yu, H. Li, D. Walker, Removal of mid spatial frequency features in mirror segments, J. Eur. Opt. Soc. 6, p. 1-4, 2011.
5. C. Song, D. Walker, G. Yu, Misfit of rigid tools and interferometer subapertures on off-axis aspheric mirror segments, Opt. Eng. 50, p. 073401, 2011. doi:10.1117/1.3597328