SPIE Startup Challenge 2015 Founding Partner - JENOPTIK Get updates from SPIE Newsroom
  • Newsroom Home
  • Astronomy
  • Biomedical Optics & Medical Imaging
  • Defense & Security
  • Electronic Imaging & Signal Processing
  • Illumination & Displays
  • Lasers & Sources
  • Micro/Nano Lithography
  • Nanotechnology
  • Optical Design & Engineering
  • Optoelectronics & Communications
  • Remote Sensing
  • Sensing & Measurement
  • Solar & Alternative Energy
  • Sign up for Newsroom E-Alerts
SPIE Photonics West 2017 | Register Today

SPIE Defense + Commercial Sensing 2017 | Register Today

2017 SPIE Optics + Photonics | Call for Papers

Get Down (loaded) - SPIE Journals OPEN ACCESS

SPIE PRESS




Print PageEmail Page

Sensing & Measurement

Infrared camera for thermal inspection & gas leak detection

Flir Advanced Thermal Solutions

Building on the success of the GasFindIR camera for detecting gas leaks, FLIR Advanced Thermal Solutions (ATS) has introduced the dual-purpose FLIR GF320 camera which can additionally be used for thermal inspections at plants.

The heart of the camera is still the same, but the GF320 is also fully radiometric, meaning that it can detect, measure and visualise temperature. FLIR has been designing thermal inspection cameras for many years, but this is the first time it has combined that function with gas detection.

Hotspots are a useful indicator of malfunction or possible malfunction, and the early identification of them can help to nip a coming problem in the bud before serious malfunction occurs, generating potentially substantial savings by minimizing downtime and repair costs.

The camera can be used to inspect facilities such as mechanical and process plant, where temperature irregularities can indicate deviation from normal function, and also electrical equipment such as circuit boards, transformers and power lines. It is also applicable for use on offshore installations.

In the display temperature ranges are presented as colors - high temperature areas are shown in red, and can therefore be easily identified by the camera operator. For the gas detection function, escaping gas is shown as a plume, with the source easily visible. For both functions, surveillance can be performed from a distance, thus avoiding any risk of injury to the operator from approaching too close to over-heated equipment or a toxic gas cloud.

www.flir.com