SPIE Startup Challenge 2015 Founding Partner - JENOPTIK Get updates from SPIE Newsroom
  • Newsroom Home
  • Astronomy
  • Biomedical Optics & Medical Imaging
  • Defense & Security
  • Electronic Imaging & Signal Processing
  • Illumination & Displays
  • Lasers & Sources
  • Micro/Nano Lithography
  • Nanotechnology
  • Optical Design & Engineering
  • Optoelectronics & Communications
  • Remote Sensing
  • Sensing & Measurement
  • Solar & Alternative Energy
  • Sign up for Newsroom E-Alerts
  • Information for:
    Advertisers
SPIE Photonics West 2017 | Register Today

SPIE Defense + Commercial Sensing 2017 | Register Today

2017 SPIE Optics + Photonics | Call for Papers

Get Down (loaded) - SPIE Journals OPEN ACCESS

SPIE PRESS




Print PageEmail Page

Electronic Imaging & Signal Processing

Photodiode

Opto Diode

Opto Diode introduces the UVG100 photodiode. The new photodetector features excellent ultraviolet (UV) response with a 100 mm2 active area. Shipped with a temporary protective cover plate, the device delivers an unsurpassed 100 percent internal quantum efficiency (QE). After exposure to megajoules/cm2, the UVG100 showed less than 2 percent responsivity loss.

All of Opto Diode's IRD products are designed for long-lifetime operation in high-particle, flux environments with no loss of responsivity. The new UVG100 absolute photodiode features advanced performance with extremely high radiation hardness. The proprietary oxynitride front window ensures successful operation without performance degradation that often occurs with high humidity and other undesirable environmental conditions.

Responsivity under test conditions at 254 nm, is a minimum of 0.08, typical 0.09, and maximum 0.13 A/W. The rise time at 10V is a maximum of 10 microseconds. The shunt resistance at ± 10 mV is a minimum of 20 MOhms; the reverse breakdown voltage is typically 10 Volts; the capacitance is typically 10 nanofarads (nF) with a maximum of 20 nF.

www.optodiode.com