SPIE Startup Challenge 2015 Founding Partner - JENOPTIK Get updates from SPIE Newsroom
  • Newsroom Home
  • Astronomy
  • Biomedical Optics & Medical Imaging
  • Defense & Security
  • Electronic Imaging & Signal Processing
  • Illumination & Displays
  • Lasers & Sources
  • Micro/Nano Lithography
  • Nanotechnology
  • Optical Design & Engineering
  • Optoelectronics & Communications
  • Remote Sensing
  • Sensing & Measurement
  • Solar & Alternative Energy
  • Sign up for Newsroom E-Alerts
  • Information for:

SPIE Photonics West 2017 | Register Today

SPIE Defense + Commercial Sensing 2017 | Call for Papers

Get Down (loaded) - SPIE Journals OPEN ACCESS


Print PageEmail PageView PDF


Designing high-performance micro-enzymatic biofuel cells

Three-dimensional microstructures encrusted with 2D nanomaterials represent a promising platform for novel energy sources for implantable electronic devices such as pacemakers.
15 April 2015, SPIE Newsroom. DOI: 10.1117/2.1201503.005847

The US implantable medical devices market increases at an average rate of 8% every year and is expected to reach $73.9 billion by 2018.1 However, the size of conventional lithium-ion batteries is one of the limiting factors in the development of implantable medical microdevices. Miniaturized, self-sufficient bioelectronics powered by unconventional micropower may lead to a new generation of implantable, wireless, minimally invasive medical devices, such as pacemakers, defibrillators, drug-delivering pumps, sensor transmitters, and neurostimulators.2 Studies have shown that micro-enzymatic biofuel cells (EBFCs) are among the most intuitive candidates for in vivo micropower. As a ‘green’ power source, EBFCs can generate electricity via biocatalysis of glucose/oxygen, which are abundant in the human body.

Purchase Nanotechnology: A Crash CourseRecent advances in nanotechnology have opened up new opportunities for developing high-performance EBFCs. Graphene, a 2D sheet of carbon atoms with excellent conductivity, high surface area, and good mechanical stability, has shown promise for solar cells, supercapacitors, lithium-ion batteries, and fuel cells. State-of-the-art graphene-based EBFCs have also indicated that graphene can establish excellent electronic biocatalyst-electrode interaction.3, 4 In the past decade, our group has been developing 3D micro/nanostructures based on carbon microelectromechanical system platforms (C-MEMS) for different electrochemical and biological applications.5–18 In particular, we have integrated 2D graphene and graphene oxide with 3D carbon microstructures offering enlarged surface areas, superior physiochemical properties, enhanced redox reactions, and improved mass transport.

Modeling could play a vital role in optimizing the design of increasingly sophisticated devices, taking into account various factors regarding mass transport, electron transfer, and reaction kinetics. Recently, we have focused on establishing rigorously validated models in conjunction with experimental studies to develop advanced microbiofuel cells with optimized 3D C-MEMS-based EBFCs. We conducted a modeling study based on coupling mass transport, enzyme kinetics, and electron transfer with a COMSOL multiphysics module, which is a finite element analysis, solver, and simulation software package for various physics and engineering applications, especially coupled phenomena, or multiphysics.19

We considered the basic prototype design of an EBFC chip with 3D micropillars sitting on two sets of interdigitated fingers as the current collector. At steady state, competition between a higher enzyme reaction rate and a lower diffusion rate depleted glucose throughout the electrode surface, and accordingly the glucose concentration varied from the top to the bottom of the electrodes, inducing a nonuniform enzyme reaction rate. The chemical reactions are catalyzed by enzymes along the 3D electrodes.

Figure 1 shows the EBFCs' performance. For conventional cylindrical electrodes, we observed the lowest current density at the bottom of the electrode and the highest near the top corner of the electrode. For each set of fixed height electrodes, the maximum value for the generated current densities varied with the inter-electrode distance. A general design rule for the 3D microbiofuel cells can be inferred, that the current density is maximized when the electrode height is roughly double the distance between them (the so-called well width). Within the typical dimensions we could achieve by C-MEMS, the electrode arrays with height 200μm had the greatest power density at around 110μW/cm2, when the voltage was approximately 0.44V, which is sufficient to operate low-voltage CMOS integrated circuits.

Figure 1. Current density profile for one row of microelectrodes at 100μm with different well widths of (a) 50μm and (b) 100μm. (c) Power density vs. cell voltage at different electrode heights. The height-to-well-width ratio of the electrode is 2:1.

In addition, we tested 2D graphene-encrusted 3D carbon microstructures as electrodes for micro-EBFCs (see Figure 2).20 To fabricate them, we combined top-down C-MEMS technology for the 3D micropillar arrays and bottom-up electrophoretic deposition (EPD) to co-deposit graphene/enzyme on the micropillar arrays for networked electrode interfaces. In brief, the C-MEMS-based 3D micropillar arrays were prepared by a two-step photolithography process using SU8-25 and SU8-100 (commonly used epoxy-based negative photoresists) followed by a pyrolysis step. EPD integrates graphene and enzyme composites onto the 3D micropillar array surface: see Figure 3(a). To evaluate the performance of the EBFC, we constructed a full cell by connecting bioanodes and biocathodes through an external variable resistor as shown in Figure 2 (right). In principle, glucose is catalyzed by glucose oxidase (GOx), produces gluconolactone and hydrogen ions, and generates electrons on the anode. On the cathode, the laccase catalyst reduces oxygen, and water is generated by the combination of electrons and hydrogen ions.

Figure 2. Fabricating a micro-enzymatic biofuel cell (EBFC) based on carbon microelectromechanical system (C-MEMS) micropillar arrays (left). An EBFC with graphene / enzyme-encrusted 3D carbon micropillar arrays (not to scale, right). In principle, glucose is catalyzed by glucose oxidase (GOx), produces gluconolactone and hydrogen ions, and generates electrons on the anode. On the cathode, the laccase catalyst reduces oxygen, and water is generated by the combination of electrons and hydrogen ions. SU8-25 and SU8-100: Commonly used epoxy-based negative photoresists. SiO2: Silicon dioxide.

Figure 3. (a) Scanning electron microscope (SEM) image showing the morphology of graphene/GOx-encrusted 3D carbon micropillar arrays. (b) Power density performance of bare carbon-based and graphene-based EBFCs.

The graphene-based bioelectrode exhibited excellent electrochemical activity. Experimental results showed that the 3D graphene/enzyme-based EBFC generated a maximum power density of 136.3μWcm−2 at 0.59V, which is almost seven times that of a bare 3D-carbon-based EBFC: see Figure 3(b). The excellent performance was attributed to increased enzyme loading and more efficient electron transfer of the graphene-encrusted 3D micro-EBFC.

In summary, we have shown that 3D microstructures encrusted with 2D nanomaterials represent a promising platform for high-performance, micro-EBFCs for powering a new generation of implantable devices such as pacemakers or defibrillators. Our theoretical and experimental study of EBFCs has helped us to devise better ways of designing and using nanomaterials in practical micro-EBFC construction. In future work, we will continue to focus on modeling EBFC systems in a transient state within blood arteries and developing nano-enabled next-generation high-performance EBFCs. The ultimate goal for our research is to validate the theoretical findings through experimental performance of EBFCs and evaluate the efficiency of the actual system.

Chunlei Wang, Yin Song
Florida International University
Miami, FL

1. Data from Transparency Market Research (behind paywall). http://www.transparencymarketresearch.com/implantable-medical-devices-market.html Accessed 24 March 2015.
2. A. Heller, Miniature biofuel cells, Chem. Chem. Phys. 6(2), p. 209-216, 2004. doi:10.1039/B313149A
3. C. Liu, S. Alwarappan, Z. Chen, X. Kong, C. Li, Membraneless enzymatic biofuel cells based on graphene nanosheets, Biosens. Bioelectron. 25(7), p. 1829-1833, 2010. doi:10.1016/j.bios.2009.12.012
4. W. Zheng, H. Zhao, J. Zhang, H. Zhou, X. Xu, Y. Zheng, Y. Wang, Y. Cheng, B. Jang, A glucose/O2 biofuel cell base on nanographene platelet-modified electrodes, Electrochem. Commun. 12(7), p. 869-871, 2010. doi:10.1016/j.elecom.2010.04.006
5. C. Wang, L. Taherabadi, G. Jia, M. Madou, C-MEMS for the manufacture of 3D microbatteries, Electrochem. Solid-State Lett. 7(11), p. A435-A438, 2004. doi:10.1149/1.1798151
6. C. Wang, G. Jia, L. Taherabadi, M. Madou, A novel method for the fabrication of high-aspect ratio C-MEMS structures, Microelectromech. Syst. 14(2), p. 348-358, 2005. doi:10.1109/JMEMS.2004.839312
7. C. Wang, M. Madou, From MEMS to NEMS with carbon, Biosens. Bioelectron. 20(10), p. 2181-2187, 2005. doi:10.1016/j.bios.2004.09.034
8. K. Malladi, C. Wang, M. Madou, Fabrication of suspended carbon microstructures by e-beam writer and pyrolysis, Carbon 44(13), p. 2602-2607, 2006. doi:10.1016/j.carbon.2006.04.039
9. H. Xu, K. Malladi, C. Wang, L. Kulinsky, M. Song, M. Madou, Carbon post-microarrays for glucose sensors, Biosens. Bioelectron. 23(11), p. 1637-1644, 2008. doi:10.1016/j.bios.2008.01.031
10. J. Yang, V. Penmatsa, S. Tajima, H. Kawarada, C. Wang, Direct amination on 3-dimensional pyrolyzed carbon micropattern surface for DNA detection, Mater. Lett. 63(30), p. 2680-2683, 2009. doi:10.1016/j.matlet.2009.09.039
11. Y. Parikh, J. H. Yang, C. Wang, Optimizing the mass transport phenomenon around micro-electrodes of an enzymatic biofuel cell inside a blood artery via finite element analysis method, J. Power Sources 195(15), p. 4685-4694, 2010. doi:10.1016/j.jpowsour.2010.01.064
12. W. Chen, M. Beidaghi, V. Penmatsa, W. Li, C. Wang, Integration of carbon nanotubes to C-MEMS for on-chip supercapacitors, IEEE Transact. Nanotechnol. 9(6), p. 734-740, 2010. doi:10.1109/TNANO.2010.2049500
13. V. Penmatsa, J. Yang, Y. Yu, C. Wang, Fabrication of porous carbon micropillars using a block copolymer as porogen, Carbon 48(14), p. 4109-4115, 2010. doi:10.1016/j.carbon.2010.07.019
14. M. Beidaghi, C. Wang, Micro-supercapacitors based on three dimensional interdigital polypyrrole/C-MEMS electrodes, Electrochim. Acta 56(25), p. 9508-9514, 2011. doi:10.1016/j.electacta.2011.08.054
15. V. Penmatsa, T. Kim, M. Beidaghi, H. Kawarada, Z. Wang, L. Gu, C. Wang, Three-dimensional graphene nanosheets encrusted carbon micropillar arrays for electrochemical sensing, Nanoscale 4(12), p. 3673-3678, 2012. doi:10.1039/C2NR30161J
16. M. Beidaghi, C. Wang, Micro-supercapacitors based on interdigitated reduced graphene oxide and carbon nanotube composites with ultra-high power handling performance, Adv. Funct. Mater. 22(21), p. 4501-4510, 2012. doi:10.1002/adfm.201201292
17. V. Penmatsa, R. Ruslinda, M. Beidaghi, H. Kawarada, C. Wang, Platelet-derived growth factor oncoprotein detection using three-dimensional carbon microarrays, Biosens. Bioelectron. 39(1), p. 118-123, 2013. doi:10.1016/j.bios.2012.06.055
18. V. Penmatsa, H. Kawarada, Y. Song, C. Wang, Comparison of different oxidation techniques for the biofunctionalization of pyrolyzed carbon, Mater. Sci. Res. India 11(1), p. 01-08, 2014. doi:10.13005/msri/110101
19. Y. Song, V. Penmatsa, C. Wang, Modeling and simulation of enzymatic biofuel cells with three-dimensional microelectrodes, Energies 7(7), p. 4694-4709, 2014. doi:10.3390/en7074694
20. Y. Song, C. Chen, C. Wang, Graphene/enzyme-encrusted three-dimensional carbon micropillar arrays for mediatorless micro-biofuel cells, Nanoscale, 2015. doi:10.1039/C4NR06856D