SPIE Startup Challenge 2015 Founding Partner - JENOPTIK Get updates from SPIE Newsroom
  • Newsroom Home
  • Astronomy
  • Biomedical Optics & Medical Imaging
  • Defense & Security
  • Electronic Imaging & Signal Processing
  • Illumination & Displays
  • Lasers & Sources
  • Micro/Nano Lithography
  • Nanotechnology
  • Optical Design & Engineering
  • Optoelectronics & Communications
  • Remote Sensing
  • Sensing & Measurement
  • Solar & Alternative Energy
  • Sign up for Newsroom E-Alerts
  • Information for:
SPIE Defense + Commercial Sensing 2017 | Register Today

OPIE 2017

OPIC 2017




Print PageEmail PageView PDF

Sensing & Measurement

Chalcogenide glass microspheres for biosensing

Microspheres of rare-earth-doped chalcogenide glass coupled to mid-IR amplifiers and lasers of tapered fibers may serve as efficient biomedical sensing devices.
18 March 2014, SPIE Newsroom. DOI: 10.1117/2.1201403.005346

Many photonic devices for biosensing are based on optical microresonators, such as the Fabry-Pérot. These systems use mirrors to achieve light oscillation in an optical cavity and produce output signals that depend on the chemicals present in the cavity. However, such microresonators have drawbacks, including high cost, limited compactness, and mechanical instability.1 One alternative approach is to use dielectric microspheres, which enable the confinement of light in circular orbits close to the spherical boundary (whispering gallery modes, or WGMs) between the dielectric surface and the surrounding medium. WGMs exhibit resonances with high quality factors Q (105/109)—meaning a lower rate of energy loss—and small mode volumes, making them suitable for use in lasers, add-drop filters, or biochemical sensors.2–5 WGMs in dielectric microspheres already have applications in polarization transmission (for polarization converters), coupled-resonator-induced transparency (for obtaining optical information storage), biosensing, nonlinear optics, quantum electrodynamics, and quantum information processing.6–8 They enable novel functionalities in integrated optics, such as wavelength selectivity, energy storage and dispersion control, and resonant filtering.9 Moreover, when doped with rare earth ions, microspheres can operate as amplifiers or microcavity lasers with low threshold lasing. Therefore, they enable light generation with low-power pumping, and the very narrow emission linewidths required in applications such as spectroscopy or sensing.10–14

Purchase SPIE Field Guide to Interferometric Optical TestingSeveral optical devices use microspheres of chalcogenide glass.15–19 Chalcogenide has a high refractive index, high nonlinearity, photosensitivity, low phonon energy, large radiative decay rates, high quantum efficiency, and enables emissions in the mid-IR at wavelengths that cannot be achieved with conventional silica glass. The low phonon energy (excitation of atoms or molecules) in chalcogenide glasses enables high transition rates, long lifetimes of excited dopant ions, low background losses, and induces reduced multiphonon relaxation.15–18 As a result, it is possible to obtain mid-IR, low-threshold lasers with suitably designed rare-earth-doped chalcogenide microspheres.19–30

WGMs in such spheres are coupled by tapered silica fibers using evanescent electromagnetic fields from waveguides placed nearby. To achieve this on planar geometry and in a suitably packaged format, we produced microsphere prototypes of chalcogenide glass composed of gallium, germanium, antimony, and sulfur (Ga5Ge20Sb10S65) and doped the spheres with erbium (Er). We used the surface-tension mold (StM) technique, which makes use of the wetting properties between a glass melt and a substrate,20 to fabricate partly truncated spheres. The StM technique enabled formation of a superspherical shape with a diameter of 5–50μm (see Figure 1). The contact angle (the angle at which liquid and solid surface meet) of such glass is θ>90°, since glassy carbons present a favorable substrate to induce low wettability of molten chalcogenide glass.21 Using a Raman spectrophotometer, we observed WGMs in these microspheres for emissions in the visible range, and we also experimentally observed luminescence in the mid-IR range from Er3+:Ga5Ge20Sb10S65 glass,31 including emission at 2775nm corresponding to the 4I11/24I13/2 transition. Based on these observations we demonstrated lasing in microspheres made of Er3+:Ga5Ge20Sb10S65. To design (or characterize) our prototypes (including optimal amplifier radius, rare earth concentration, and waveguide transversal section), we considered particle swarm optimization (PSO) modeling, a computational method for problem solving based on ‘ swarm’ behavior of particles that represent possible solutions.21 We chose PSO because solving equations relating to rate of ion transitions and power propagation using conventional numerical procedures requires the optimization of each design parameter, one by one.22–24 For our rare-earth-doped model it was difficult to perform such optimization because the up-conversion and cross-relaxation phenomena (the energy transfer between dopant ions) induce nonlinearities. Furthermore, deterministic algorithms can exhibit stagnation problems in local maxima/minima during the optimization search for the objective functions (in this case, gain or output power). The PSO algorithm, due to its stochastic nature, is highly efficient in optimizing a large number of parameters, can avoid local maxima/minima, and can operate in discontinuous solution domains.25–27, 32

Figure 1. Images taken with an optical microscope (left) and scanning electron microscope (right) of an erbium-doped microsphere of chalcogenide glass (Ga5Ge20Sb10S65) coated with a gold/palladium conductive layer at the surface to assist imaging.21

Using PSO, we optimized an amplifying system operating close to 2.7μm and based on Er3+-doped chalcogenide microspheres coupled to a tapered fiber.21 We used a 3D mathematical model28, 29 to calculate the fitness function of the PSO procedure,25–27 employing the optical and spectroscopic parameters measured on chalcogenide glass,29, 30 and on fabricated and characterized preliminary samples of microspheres.21

We modeled an amplifying system comprising a tapered optical fiber placed close to the equator of Er3+-doped chalcogenide microspheres, with21 and without28 PSO, and modeled the coupling of the optical power between the tapered fiber and the undoped microspheres.33–35 We obtained time-domain evolution of the amplitude of the internal cavity electromagnetic field at the pump and the signal wavelength by solving the pertaining differential equations.28, 34–39

We performed the PSO design for a pump wavelength close to λp=980nm and a signal wavelength close to λs=2770nm.21 The thickness of the Er-doped region and the Er concentration were s=3μm and NEr=0.5wt%, respectively. The input pump power was Pp=100mW and the input signal power Ps=−50dBm.

To perform the PSO simulations, we considered many WGMs in the wavelength band 2740–2820nm. The PSO enabled identification of the maximum gain (global best) for the WGM1, 217, 217 with the following optimal parameters: microsphere radius R0=45μm, taper waist radius a=517nm, taper angle δ=0.03rad, taper-microsphere gap g=512nm. By varying the parameter n from 1 to 3, we simulated 18 different resonant WGMs.

For each WGM, we took into account the proper resonance frequency to consider all the spectroscopic and physical parameters (refractive index, emission cross section, and absorption cross section) that would affect the competition with other WGMs. The use of a deterministic method required a suitable discretization for R0, a, δ, g, and thus the investigation of an extremely high number of different cases.28 PSO, by contrast, optimizes simultaneously a high number of parameters through an automated global solution search. The discrepancy in the calculated maximum gain observed using the two different optimization methods (deterministic, G=6.9dB, and PSO-based, G=33.7dB) is due to the higher efficiency of the global optimization approach.

In conclusion, we have designed an Er3+-doped chalcogenide microsphere amplifier evanescently coupled with a tapered optical fiber. We optimized the amplifying system using a PSO procedure for operation close to 2770nm, and fabricated preliminary chalcogenide microspheres. The PSO approach and StM technique promise good results in the design and fabrication of active and passive microspheres, which could find applications in optical sensing for biomedicine.

Microspheres of Ga5Ge20Sb10S65 have previously been fabricated and characterized. However, building an amplifier requires a suitable Ga5Ge20Sb10S65 fiber taper with a very small radius. Future work will focus on obtaining such a taper, or on designing a coupling integrated optical system.31 We will also investigate the feasibility of chalcogenide microspheres obtaining amplification and lasing in the mid-IR wavelength range. We will use the PSO algorithm to form the design, and will extend the work to include different kinds of glass (ZBLAN, silica, tellurite, and chalcogenide, for example) and different dopants (dysprosium, praseodymium, or neodymium). Moreover, the code will allow the design of microsphere resonators with different layers/packages with complex refractive indexes. Only some of these materials will be considered for mid-IR operation (chalcogenide and tellurite glasses, for example), while the other materials will be tested for comparison and theoretically investigated for their wavelength range operation. We will examine coupling with fiber tapers that have both microstructured and conventional sections, and may consider the integration of planar waveguides.40

Giuseppe Palma, Pietro Bia, Luciano Mescia, Francesco Prudenzano
Department of Electrical Engineering and Information
Technical University at Bari
Bari, Italy

Giuseppe Palma received his degree in electrical engineering in September 2013. His research interests include modeling of active microspheres and substrate-integrated waveguides. He is a member of the Italian Society of Optics and Photonics.

Pietro Bia has been a PhD student since 2012. He received a scholarship in 2011 for postgraduate research into design of innovative cladding-pumped fiber lasers, and nonlinear effects induced by high optical power density and microsphere lasers. He is a member of the Italian Society of Optics and Photonics and the Italian Society of Electromagnetism.

Luciano Mescia received his PhD in electromagnetic fields in 2003. His research interests include the development of artificial neural networks, genetic algorithms, and swarm intelligence applied to rare-earth-doped fiber lasers and amplifiers. He is currently studying innovative antenna arrays for energy harvesting; analysis and synthesis of novel dielectric lens antennas operating in the microwave and millimeter frequency range; and novel FDTD (finite-difference time-domain) schemes based on fractional calculus.

Francesco Prudenzano received his BSc in electronic engineering from the University of Bari in 1990, and his PhD in electromagnetic fields from the Technical University at Bari, where he has been associate professor in electromagnetic fields since 2003. His research interests include optical and microwave devices and rare-earth-doped photonic crystal fibers. He has co-authored more than 320 publications.

Tetsuji Yano, Jun Taguchi
Department of Chemistry and Materials
Institute of Technology
Tokyo, Japan

Tetsuji Yano received his BSc, MSc, and doctor of engineering from the Tokyo Institute of Technology, where he is now an associate professor. His research covers glass materials processing and their applications, including optical functionalities of glass devices.

Jun Taguchi holds a BSc, MSc, and doctor of engineering, and is currently a researcher at Corning Inc., Japan.

Virginie Nazabal
Institute of Chemical Sciences
Joint Research Unit UR1-CNRS 6226
University of Rennes 1
Rennes, France
Alain Moréac
Institute of Physics
Joint Research Unit CNRS 6626
University of Rennes 1
Rennes, France

1. A. B. Matsko, V. S. Ilchenko, Optical resonators with whispering gallery modes—part I: basics, IEEE J. Sel. Topics Quantum Electron. 12(1), p. 3-13, 2006. doi:10.1109/JSTQE.2005.862952
2. M. L. Gorodetsky, V. S. Ilchenko, High-Q optical whispering gallery microresonators: precession approach for spherical mode analysis and emission patterns with prism couplers, Opt. Commun. 113, p. 133-143, 1994. doi:10.1016/0030-4018(94)90603-3
3. A. Serpenguzel, S. Arnold, G. Griffel, Excitation of resonances of microspheres on an optical fiber, Opt. Lett. 20(7), p. 654-656, 1995. doi:10.1364/OL.20.000654
4. F. Treussart, N. Dubreuil, J. C. Knight, V. Sandoghdar, J. Hare, V. Lefevre-Seguin, J. M. Raimond, S. Haroche, Microlasers based on silica microspheres, Ann. Telecommun. 52(11-12), p. 557-568, 1997.
5. J. C. Knight, G. Cheung, F. Jacques, T. A. Birks, Phase-matched excitation of whispering gallery mode resonances using a fiber taper, Opt. Lett. 22(15), p. 1129-1131, 1997. doi:10.1364/OL.22.001129
6. H.-C. Ren, F. Vollmer, S. Arnold, A. Libchaber, High-Q microsphere biosensor-analysis for adsorption of rodlike bacteria, Opt. Express 15, p. 17410-17423, 2007. doi:10.1364/OE.15.017410
7. F. Vollmer, A. Stephen, Whispering gallery mode biosensing: label-free detection down to single molecules, Nat. Methods 5, p. 591-596, 2008. doi:10.1038/nmeth.1221
8. L. Yang, K. J. Vahala, Gain functionalization of silica microresonators, Opt. Lett. 28, p. 592-594, 2003. doi:10.1364/OL.28.000592
9. P. Wang, M. Ding, T. Lee, G. S. Murugan, L. Bo, Y. Semenova, Q. Wu, D. Hewak, G. Brambilla, G. Farrell, Packaged chalcogenide microsphere resonator with high Q-factor, Appl. Phys. Lett. 102, p. 131110, 2013. doi:10.1063/1.4801474
10. G. S. Murugan, M. N. Zervas, Y. Panitchob, J. S. Wilkinson, Integrated Nd-doped borosilicate glass microsphere laser, Opt. Lett. 36, p. 73-75, 2011.
11. S. Y. Chen, T. Sun, K. T. V. Grattan, K. Annapurna, R. Sen, Characteristics of Er and Er-Yb-Cr doped phosphate microsphere fibre lasers, Opt. Commun. 282, p. 3765-3769, 2009.
12. P. Feron, Whispering gallery mode lasers in erbium doped fluoride glasses, Ann. Fond. Louis de Broglie 29, p. 317-329, 2004.
13. G. Nunzi Conti, A. Chiasera, L. Ghisa, S. Berneschi, M. Brenci, Y. Dumeige, S. Pelli, S. Sebastiani, P. Feron, M. Ferrari, G. C. Righini, Spectroscopic and lasing properties of Er3+ doped glass microspheres, Non-Cryst. Sol. 352, p. 2360-2363, 2006. doi:10.1016/j.jnoncrysol.2006.01.089
14. K. Miura, K. Tanaka, K. Hirao, CW laser oscillation on both the 4F3/2–4I11/2 and 4F3/2–4I13/2 transitions of Nd3+ ions using a fluoride glass microsphere, J. Non-Cryst. Sol. 213-214, p. 276-280, 1997. doi:10.1016/S0022-3093(96)00671-0
15. N. Jin, Y. Rahmat-Samii, Advances in particle swarm optimization for antenna designs: real-number, binary, single-objective and multiobjective implementations, IEEE Trans. Ant. Prop. 55(3), p. 556-567, 2007. doi:10.1109/TAP.2007.891552
16. G. R. Elliot, D. W. Hewak, G. Senthil Murugan, J. S. Wilkinson, Chalcogenide glass microspheres; their production, characterization, and potential, Opt. Express 15, p. 17542-17553, 2007. doi:10.1364/OE.15.017542
17. P. Wang, G. S. Murugan, G. Brambilla, M. Ding, Y. Semenova, Q. Wu, G. Farrell, Chalcogenide microsphere fabricated from fiber tapers using contact with a high-temperature ceramic surface, IEEE Photon. Technol. Lett. 24(13), p. 1103-1105, 2012. doi:10.1109/LPT.2012.2195722
18. C. Grillet, S. N. Bian, E. C. Magi, B. J. Eggleton, Fiber taper coupling to chalcogenide microsphere modes, Appl. Phys. Lett. 92(17), p. 171109-171111, 2008.
19. D. H. Broaddus, M. A. Foster, I. H. Agha, J. T. Robinson, M. Lipson, A. L. Gaeta, Silicon-waveguide-coupled high-Q chalcogenide microspheres, Opt. Express 17(8), p. 5998-6003, 2009. doi:10.1364/OE.17.005998
20. T. Yano, S. Shibata, T. Kishi, Fabrication of micrometer-size glass solid immersion lens, J. Appl. Phys. B 83, p. 167-170, 2006. doi:10.1007/s00340-006-2178-1
21. G. Palma, P. Bia, L. Mescia, T. Yano, V. Nazabal, J. Taguchi, A. Moréac, F. Prudenzano, Design of fiber coupled Er3+:chalcogenide microsphere amplifier via particle swarm optimization algorithm, Opt. Eng. 53, p. 071805, 2013. doi:10.1117/1.OE.53.7.071805
22. L. Mescia, F. Prudenzano, M. De Sario, T. Palmisano, M. Ferrari, G. C. Righini, Design of rare-earth-doped microspheres, IEEE Photon. Techonol. Lett. 22, p. 422-424, 2010. doi:10.1109/LPT.2009.2039932
23. T. Kouki, T. Makoto, Optical microsphere amplification system, Opt. Lett. 32, p. 3197-3199, 2007. doi:10.1364/OL.32.003197
24. Y. G. Boucher, P. Féron, Generalized transfer function: a simple model applied to active single-mode microring resonators, Opt. Commun. 282, p. 3940-3947, 2009. doi:10.1016/j.optcom.2009.06.048
25. A. Giaquinto, L. Mescia, G. Fornarelli, F. Prudenzano, Particle swarm optimization-based approach for accurate evaluation of upconversion parameters in Er3+-doped fibers, Opt. Lett. 36(2), p. 142-144, 2011. doi:10.1364/OL.36.000142
26. L. Mescia, A. Giaquinto, G. Fornarelli, G. Acciani, M. De Sario, F. Prudenzano, Particle swarm optimization for the design and characterization of silica-based photonic crystal fiber amplifiers, J. Non-Cryst. Sol. 357, p. 1851-1855, 2011. doi:10.1016/j.jnoncrysol.2010.12.049
27. S. Girard, L. Mescia, M. Vivona, A. Laurent, Y. Ouerdane, C. Marcandella, F. Prudenzano, et. al., Design of radiation-hardened rare-earth doped amplifiers through a coupled experiment/simulation approach, J. Lightwave Technol. 31, p. 1247-1254, 2013. doi:10.1109/JLT.2013.2245304
28. L. Mescia, P. Bia, M. De Sario, A. Di Tommaso, F. Prudenzano, Design of mid-infrared amplifiers based on fiber taper coupling to erbium-doped microspherical resonator, Opt. Express 20(7), p. 7616-7629, 2012. doi:10.1364/OE.20.007616
29. L. Mescia, P. Bia, O. Losito, F. Prudenzano, Design of mid-IR Er3+-doped microsphere laser, IEEE Photon. J 5, p. 1501308, 2013. doi:10.1109/JPHOT.2013.2277052
30. F. Prudenzano, L. Mescia, L. Allegretti, V. Moizan, V. Nazabal, F. Smektala, Theoretical study of cascade laser in erbium-doped chalcogenide glass fibers, Opt. Mater. 33, p. 241-245, 2010.
31. V. Moizan, V. Nazabal, J. Troles, P. Houizot, J. L. Adam, F. Smektala, G. Gadret, S. Pitois, J. L. Doualan, R. Moncorgé, G. Canat, Er3+-doped GeGaSbS glasses for mid-IR fibre laser application: synthesis and rare earth spectroscopy, Opt. Mater. 31(1), p. 39-46, 2008. doi:10.1016/j.optmat.2008.01.005
32. J. Robinson, Y. Rahmat-Samii, Particle swarm optimization in electromagnetics, IEEE Trans. Ant. Prop. 52(2), p. 397-407, 2004. doi:10.1109/TAP.2004.823969
33. B. E. Little, J.-P. Laine, H. A. Haus, Analytic theory of coupling from tapered fibers and half-blocks into microsphere resonators, J. Lightwave Technol. 17, p. 704-715, 1999. doi:10.1109/50.754802
34. M. L. Gorodetsky, V. S. Ilchenko, Optical microsphere resonators: optimal coupling to high-Q whispering-gallery modes, J. Opt. Soc. Am. B 16, p. 147-154, 1999. doi:10.1364/JOSAB.16.000147
35. C.-L. Zou, Y. Yang, C.-H. Dong, Y.-F. Xiao, X.-W. Wu, Z.-F. Han, G.-C. Guo, Taper-microsphere coupling with numerical calculation of coupled-mode theory, J. Opt. Soc. Am. B 25, p. 1895-1898, 2008. doi:10.1364/JOSAB.25.001895
36. H. A. Haus, Waves and Fields in Optoelectronics, Prentice Hall, 1984.
37. M. J. F. Digonnet, Rare-Earth-Doped Fiber Lasers and Amplifiers, Marcel Dekker, 2001.
38. K. Vahala, Optical Microcavities , World Scientific Publishing Co., 2004.
39. A. W. Snyder, J. D. Love, Optical Waveguide Theory, Chapman and Hall, 1983.
40. J. Charrier, M. L. Anne, H. Lhermite, V. Nazabal, J. P. Guin, T. Jouan, F. Henrio, D. Bosc, J. L. Adam, Sulphide GaxGe25 − xSb10S65(x=0, 5) sputtered films: elaboration and optical characterisation of planar and rib optical waveguides, J. Appl. Phys. 104(7), p. 073110, 2008. doi:10.1063/1.2968248