SPIE Membership Get updates from SPIE Newsroom
  • Newsroom Home
  • Astronomy
  • Biomedical Optics & Medical Imaging
  • Defense & Security
  • Electronic Imaging & Signal Processing
  • Illumination & Displays
  • Lasers & Sources
  • Micro/Nano Lithography
  • Nanotechnology
  • Optical Design & Engineering
  • Optoelectronics & Communications
  • Remote Sensing
  • Sensing & Measurement
  • Solar & Alternative Energy
  • Sign up for Newsroom E-Alerts
  • Information for:
SPIE Photonics West 2018 | Register Today

SPIE Defense + Commercial Sensing 2018 | Register Today

SPIE Photonics Europe 2018 | Call for Papers

2018 SPIE Optics + Photonics | Call for Papers




Print PageEmail PageView PDF

Lasers & Sources

Quantum cascade lasers for IR and THz spectroscopy

Recent research demonstrates increased power, spectral coverage, and tunability of quantum cascade lasers.

16 December 2013, SPIE Newsroom. DOI: 10.1117/2.1201312.005239

Terahertz spectroscopy is widely used for chemical detection, and has applications in quality control for manufacturing, security screening, and astronomy. Most chemicals absorb in the mid-IR and THz spectral regions, which cover a wavelength range of 3–300 microns. However, detecting trace amounts (parts-per-billion) is often challenging with IR and THz spectroscopy because traditional broadband thermal sources are not compatible with high-sensitivity detection techniques, such as cavity ring-down or photoacoustic spectroscopy. These methods require long optical path lengths (directional emission) or high average power at a specific wavelength, which favors the use of lasers. The ideal source is compact, efficient, and broadly tunable over the wavelength range of interest.

During our research1 we developed quantum cascade lasers (QCLs) with the highest power, efficiency, and tunability. Unlike traditional diode lasers, the QCL has a series of quantum wells, which split the usual electron bands into subbands. The QCL emits over several intersubband transitions in this structure. We can engineer its optical response using quantum size effects, to achieve a highly variable emitting wavelength based on nanometer-scale control of the quantum well thickness: see Figure 1(a). We demonstrated room-temperature QCLs covering both the 3–16μm and 65–300μm wavelength ranges2–4 using an indium phosphide (InP) material system.5

Figure 1. (a) Images of a quantum cascade laser (QCL) at different magnifications. (b) Continuous-wave performance of a high-efficiency QCL at room temperature.

As we worked to improve the spectral coverage of QCL technology, we also sought to realize high-efficiency and high-power sources. High efficiency is critical to maintaining a compact device and minimizing waste heat, especially in continuous operation. We achieved 53% and 27% wallplug efficiency (electrical-to-optical power conversion efficiency) at 40K and 300K, respectively.6, 7 We also demonstrated high-power continuous operation, with up to 5.1W for a single emitter at a wavelength of about 4.9μm: see Figure 1(b). We achieved peak-power scaling, with broad-area lasers exhibiting power levels of 10, 190, and 25W at wavelengths of 3, 4.5, and 10μm, respectively.8 We made similar investigations of high-power single-frequency QCLs with good beam quality. In continuous operation, we achieved distributed feedback (DFB) QCLs with up to 2.4W of power.9 In efforts to develop a more scalable architecture, we also demonstrated single-frequency surface-emitting DFB ring lasers, with up to 0.5W of continuous power at room temperature.10 Using broader area devices, such as photonic crystal DFB—see Figure 2(a)—and β-DFB geometries (one-dimensional DFBs inside an angled cavity with the grating lines parallel to the laser facet), we obtained single-frequency peak powers up to 34W, as shown in Figure 2(b).11,12

Figure 2. (a) Scanning electron microscope images of photonic crystal distributed feedback (DFB) structures. (b) High-power single-mode performance of a photonic crystal DFB QCL.

Figure 3. (a) Tunable QCL array. (b) Single-mode spectral lines of a heterogeneous QCL gain medium from 5.7–9.3μm. a.u.: Arbitrary units.

We are also investigating wide spectral coverage and electrical tuning of QCLs on a single chip, including DFB laser arrays—shown in Figure 3(a)—covering up to 95cm−1 continuously.13 For dynamic tuning with a single device, we developed sampled-grating distributed feedback (SGDFB) QCLs with up to 50cm−1 of electrical tuning and continuous operation,14 and recent design changes have enabled tuning of up to 240cm−1 from a single device.15 Figure 3(b) shows a super-broadband heterogeneous gain medium covering a wavelength range of 5.7–9.3μm. We have developed similar array technology with dual wavelength sources based on intracavity difference frequency generation,3 as shown in Figure 4(a). We demonstrated THz emission from 1–5THz at room temperature: see Figure 4(b).

Figure 4. (a) Schematic diagram of a THz source based on intracavity difference frequency generation. (b) Room-temperature single-mode emission from 1–5THz. λ: Wavelength.

With increases in power, spectral coverage, and tuning range we are finally exploiting some of the physical potential of intersubband emitters. At present, there is no hard limit in any of these areas, and the next step is to continue to improve characteristics for real-world applications. We also aim to transfer the technology from the laboratory to commercial products; handheld and battery-powered laser sources being the preferred option for many applications. Finally, cost remains an issue for adopting this technology, although—as with other semiconductor lasers—it has strong potential for mass production, which would reduce costs considerably.

Manijeh Razeghi
Northwestern University
Evanston, IL

Manijeh Razeghi is the Walter P. Murphy Professor and director of the Center for Quantum Devices at the Department of Electrical Engineering and Computer Science. She is a leading scientist in semiconductor technology, pioneering the development and implementation of major modern epitaxial techniques.

1. http://cqd.eecs.northwestern.edu Northwestern University's Center for Quantum Devices. Accessed 24 November 2013.
2. N. Bandyopadhyay, Y. Bai, S. Tsao, S. Nida, S. Slivken, M. Razeghi, Room temperature continuous wave operation of λ∼3–3.2μm quantum cascade lasers, Appl. Phys. Lett. 101(24), p. 241110, 2012.
3. M. Razeghi, J. S. Yu, , A. Evans, S. Slivken, S. R. Darvish, J. David, J. Nguyen, B. Gokden, S. Khosravani, Quantum cascade laser progress and outlook, Proc. SPIE 5617 , p. 221-232, 2004. doi:10.1117/12.583530
4. Q. Y. Lu, N. Bandyopadhyay, S. Slivken, Y. Bai, M. Razeghi, Widely tuned room temperature terahertz quantum cascade laser sources based on difference-frequency generation, Appl. Phys. Lett. 101(25), p. 251121, 2012.
5. M. Razeghi, The MOCVD Challenge: A survey of GaInAsP-InP and GaInAsP-GaAs for photonic and electronic device applications, CRC Press, 2010.
6. Y. Bai, S. Slivken, S. R. Darvish, S. Kuboya, M. Razeghi, Quantum cascade lasers that emit more light than heat, Nat. Photon. 4, p. 99, 2010.
7. Y. Bai, N. Bandyopadhyay, S. Tsao, S. Slivken, M. Razeghi, Room temperature quantum cascade lasers with 27% wall plug efficiency, Appl. Phys. Lett. 98(18), p. 181102, 2011.
8. M. Razeghi, S. Slivken, Y. Bai, B. Gokden, S. R. Darvish, High power quantum cascade lasers, New J. Phys. 11, p. 125017, 2009.
9. Q. Y. Lu, Y. Bai, N. Bandyopadhyay, S. Slivken, M. Razeghi, 2.4 W room temperature continuous wave operation of distributed feedback quantum cascade lasers, Appl. Phys. Lett. 98(18), p. 181106, 2011.
10. Y. Bai, S. Tsao, N. Bandyopadhyay, S. Slivken, Q. Y. Lu, D. Caffey, M. Pushkarsky, T. Day, M. Razeghi, High power, continuous wave, quantum cascade ring laser, Appl. Phys. Lett. 99(26), p. 261104, 2011.
11. B. Gokden, Y. Bai, N. Bandyopadhyay, S. Slivken, M. Razeghi, Broad area photonic crystal distributed feedback quantum cascade lasers emitting 34 W at λ∼4.36μm, Appl. Phys. Lett. 97(13), p. 131112, 2010.
12. Y. Bai, S. Slivken, Q. Y. Lu, N. Bandyopadhyay, M. Razeghi, Angled cavity broad area quantum cascade lasers, Appl. Phys. Lett. 101(8), p. 081106, 2012.
13. M. Razeghi, B. Gökden, S. Tsao, A. Haddadi, N. Bandyopadhyay, S. Slivken, Widely tunable, single-mode, high-power quantum cascade lasers, Proc. SPIE 8069, p. 806905, 2011. doi:10.1117/12.887575
14. S. Slivken, N. Bandyopadhyay, S. Tsao, S. Nida, Y. Bai, Q.Y. Lu, M. Razeghi, Sampled grating, distributed feedback quantum cascade lasers with broad tunability and continuous operation at room temperature, Appl. Phys. Lett. 100, p. 261112, 2012.
15. S. Slivken, N. Bandyopadhyay, Y. Bai, Q. Y. Lu, M. Razeghi, Extended electrical tuning of quantum cascade lasers with digital concatenated gratings, Appl. Phys. Lett.. doi:10.1063/1.4841635