SPIE Membership Get updates from SPIE Newsroom
  • Newsroom Home
  • Astronomy
  • Biomedical Optics & Medical Imaging
  • Defense & Security
  • Electronic Imaging & Signal Processing
  • Illumination & Displays
  • Lasers & Sources
  • Micro/Nano Lithography
  • Nanotechnology
  • Optical Design & Engineering
  • Optoelectronics & Communications
  • Remote Sensing
  • Sensing & Measurement
  • Solar & Alternative Energy
  • Sign up for Newsroom E-Alerts
  • Information for:
SPIE Photonics West 2019 | Call for Papers

2018 SPIE Optics + Photonics | Register Today



Print PageEmail PageView PDF

Optoelectronics & Communications

Photoinduced 3D optical cavities in chalcogenide glass

A new approach to creating 3D optical cavities by exploiting the photosensitivity of chalcogenide glass is demonstrated, allowing monitoring during fabrication and dynamic tuning of optical properties.
19 April 2012, SPIE Newsroom. DOI: 10.1117/2.1201204.004180

Optical cavities, which confine light in an enclosed space for a prolonged time, can be used to purify the properties of light, enhance the interaction between light and matter, and explore the quantum nature of light. These features are critical for many important applications in sensors and analytical instrumentation, communications, and microwave photonics.

The geometries of optical cavities can be classified by the number of dimensions the optical path occupies. Zero-dimension optical cavities can be created by introducing a point defect in periodic structures, such as photonic crystals. One-dimensional cavities are typified by Fabry-Pérot resonators, in which light bounces back and forth between two mirrors. A good example of a 2D optical cavity is the so-called whispering gallery mode, in which light bounces along the circumference of a reflector with circular geometry. When it comes to 3D, things become more complicated for two reasons: first, the difficulty of maintaining a stable closed optical path in 3D; second, the difficulty of confining light in 3D while minimizing degradation.

One way of creating a high-quality 3D optical resonator is to exploit the property of light spiraling along the surface of a dielectric cylinder. For example, researchers have demonstrated bloated ‘bottle resonator’ cylinders that confine traveling spiral waves.1 Such designs offer better tunability than 2D cavities, and allow an appropriately chosen cavity mode to be tuned to an arbitrarily predetermined frequency. Although bottle resonators can be fabricated using a heating-and-puling method, precisely controlling geometries to produce complex profiles can be much more difficult, especially on microscopic scales. The heating process also prevents the cavity from being monitored in real time during fabrication.

Recently we discovered a new approach to creating 3D optical resonators.2 Our method makes no change to the shape of the dielectric cylinder, but instead introduces a tiny refractive index change (∼10−3), causing total internal reflection of the spiral wave. Figure 1 shows how this works. In this illustration, the smooth refractive-index gradient shown at left can be approximated as a stack of material layers with different refractive indices. When a spiral wave enters from the higher-refractive-index layer, the angle of incidence increases as it propagates to a layer with lower refractive index, until it reaches the critical angle at a certain point and total internal reflection occurs. In reality, the index changes in a continuous fashion, but the underlying physics is the same. From Figure 1 we can see that a gentle index slope along the axis of a dielectric cylinder can serve as a total reflection mirror for the spiral waves, which can be used to make an optical cavity.

Figure 1. An index slope is a virtual total reflection mirror that can be used to control the transmission of spiral light. n: Refractive index. Δn: Change in refractive index.

In our experiment (see Figure 2), an arsenic sulfide-based chalcogenide glass (ChG) fiber was used as the hosting material due to its unique photosensitive properties. Exposing the glass to green laser light induces a structural change that lowers the refractive index. To do this, we first tapered the ChG fiber down to a microfiber with diameter of 15μm by heating and pulling. Then we shined a focused continuous wave green laser onto the microfiber. One side of the optical cavity is defined by a gentle index slope induced by the Gaussian profile of the green beam. The other side is defined by the tapering slope of the microfiber.1 The cavity is excited and probed by touching it with a silica taper placed orthogonally to the microfiber. The measurement result indicates the quality factor Q of our cavity (∼2×105), which is among the best of reported ChG cavities. Higher Q indicates a lower rate of energy loss relative to the stored energy of the oscillator. A related publication from a different group showed that the same concept can be applied to silica glass3 by using surface expansion from CO2 laser irradiation.

Figure 2. (a) Before laser exposure, spiral waves is not confined along the chalcogenide (ChG) microfiber. (b) A focused green continuous wave laser is used to modify the index profile along the fiber axis. (c) After exposure, the spiral wave is localized and a cavity is formed, characterized by resonance dips in the transmission spectrum. A sample spectrum of such resonance is shown in (d). SiO2: Silica. A.U.: Arbitrary units. Q: Quality factor.

Our approach offers several advantages, including more control over cavity shaping, real-time monitoring during fabrication, and dynamic tuning. By exploiting the unique properties of ChG glass, our novel whispering-gallery-mode cavity architecture could be used to make efficient nonlinear optical devices and sensors for mid-IR wavelengths.4 The potential applications of this new approach are extensive. We have shown that a spiral wave can be controlled with a very small index change, induced either electronically or optically. Moreover, by manipulating the wave along the cylinder surface, other functionalities can be achieved. These include reconfigurable dispersion compensation, filtering, and optical delay on a microscopic scale. Next we will explore the nonlinear properties of the demonstrated cavities at mid-IR wavelengths for the application of low-threshold nonlinear signal processing and sensor fabrication.

This project was supported by the Singapore Ministry of Education Academic Research Fund (Tier1 RG24/10) and the Australian Research Council Centre of Excellence for Ultrahigh Bandwidth Devices for Optical Systems (project CE110001018).

Feng Luan
Nanyang Technological University
Singapore, Singapore

Feng Luan obtained his BSc and MSc in physics from Peking University in 1999 and 2001, respectively. He joined the photonics material group at the University of Bath and received a PhD in 2005. He is currently an assistant professor in the School of Electrical and Electronic Engineering at Nanyang Technological University.

Benjamin J. Eggleton
ARC Centre for Ultrahigh-Bandwidth Devices for Optical Systems (CUDOS)
Institute of Photonics and Optical Science
University of Sydney
Sydney, Australia

Benjamin Eggleton is an ARC (Australian Research Council) Federation Fellow and professor of physics at the University of Sydney, and director of both CUDOS and the Institute of Photonics and Optical Science. He obtained his BSc and PhD in physics from the University of Sydney in 1992 and 1996, respectively. He is the author or co-author of more than 320 journal publications and over 100 invited presentations. He is a Fellow of the Optical Society of America, IEEE, and the Australian Academy of Technological Sciences and Engineering. In 2011, he received the Eureka Prize for Leadership in Science, having previously won the 2007 Pawsey Medal from the Australian Academy of Science, the 2004 Malcolm McIntosh Prize for Physical Scientist of the Year, the 2003 International Commission on Optics Prize, the 1998 Adolph Lomb Medal from the Optical Society of America, the Distinguished Lecturer Award from the IEEE/Lasers and Electro-Optics Society, and the R&D100 Award. He has been president of the Australian Optical Society and is currently editor for Optics Communications.

1. M. Pöllinger, D. O'Shea, F. Warken, A. Rauschenbeutel, Ultrahigh-Q tunable whispering-gallery-mode microresonator, Phys. Rev. Lett. 103(5), 2009.
2. F. Luan, E. Magi, T. Gong, I. Kabakova, B. J. Eggleton, Photoinduced whispering gallery mode microcavity resonator in a chalcogenide microfiber, Opt. Lett. 36, p. 4761-4763, 2011.
3. M. Sumetsky, D. J. DiGiovanni, Y. Dulashko, J. M. Fini, X. Liu, E. M. Monberg, T. F. Taunay, Surface nanoscale axial photonics: robust fabrication of high-quality-factor microresonators, Opt. Lett. 36, p. 4824-4826, 2011.
4. B. J. Eggleton, B. Luther-Davies, K. Richardson, Chalcogenide photonics, Nat. Photon. 5(3), p. 141-148, 2011.