SPIE Membership Get updates from SPIE Newsroom
  • Newsroom Home
  • Astronomy
  • Biomedical Optics & Medical Imaging
  • Defense & Security
  • Electronic Imaging & Signal Processing
  • Illumination & Displays
  • Lasers & Sources
  • Micro/Nano Lithography
  • Nanotechnology
  • Optical Design & Engineering
  • Optoelectronics & Communications
  • Remote Sensing
  • Sensing & Measurement
  • Solar & Alternative Energy
  • Sign up for Newsroom E-Alerts
  • Information for:

SPIE Photonics West 2019 | Register Today

SPIE Defense + Commercial Sensing 2019 | Call for Papers



Print PageEmail PageView PDF

Sensing & Measurement

Optical-fiber stress sensors predict landslides

Optical-fiber sensors embedded into suspect hillsides track subsurface differential forces, enabling accurate, early warning of major rock and soil events.
25 March 2011, SPIE Newsroom. DOI: 10.1117/2.1201102.003468

Landslides are among the most costly natural disasters in terms of human lives and infrastructure damage. Predicting them with sufficient time to avert catastrophe is an urgent goal. In nature, landslides take place when the weight of a hill's soil exceeds the countering frictional forces that hold it in place. Many landslide-monitoring approaches have been investigated in the past several years—such as electromechanical displacement measuring, topographic surveys, and GPS surveys1,2—with mixed results. Landslide prediction is complicated because ‘soil’ is not a uniform substance: it includes randomly distributed rocks and roots, clays and compost. Moreover, landslides are a highly localized phenomenon. In witnessing the aftermath of a landslide, as remarkable as the amount of soil that fell is the amount of soil that remained in place. Improving forecasting requires monitoring the internal mechanical-property distribution and variations of the soil composite, or ‘landslide body.’ We have developed fiber-optic stress sensors that can be embedded inside the landslide body, enabling remote, real-time measurement of differential stresses such as shear and compression. These measurements can then be combined with specific geological models for more accurate results.

Figure 1 shows the monitoring configuration. Our sensor comprises optical fibers inside steel tubes. In application, vertical holes are drilled in the landslide body down to bedrock, and the sensors are laid down in the holes. The soil around the sensors is backfilled so that differential stresses between the bedrock and the landslide body, and within the landslide body itself, are accurately felt by the sensors.3,4

Figure 1. Landslide monitoring configuration based on distributed-fiber stress sensors.

The sensing system has been implemented in a field trial at the Three Gorges mountain area in China and at other locations. Figure 2 shows one such emplacement. Figure 3 shows the curve of pressure over time in four directions in one of the field-trial boreholes at a depth of 10m. Automatic measurements were made every other day over a period of one month. We established a profile of the internal mechanical properties and variations along each borehole. We also built up a stress-time database for the entire site.

Figure 2. Field-trial location of optical-fiber sensors for monitoring landslides. 1–4: Placement of boreholes.

Figure 3. Pressure over time in a borehole at a depth of 10m. A, B, C, D: The four directions of the monitoring point.

We have developed two kinds of distributed-stress sensing systems: optical time-domain reflectometry (OTDR) and optical frequency-domain reflectometry (OFDR).4–6 Both rely on backscatter light measurement. The OTDR system uses pulsed laser sources and direct detection. This technology poses a tradeoff between dynamic range and spatial resolution. The typical spatial resolution is about 1m, dynamic range about 40dB, and sensitivity limited to about −50dBm. OFDR offers higher resolution than OTDR due to its inherently coherent detection, higher sensitivity, and larger dynamic range. In fact, we have achieved spatial resolution of 5cm, dynamic range of about 70dB, and sensitivity less than −80dBm. OFDR is, however, considerably more expensive than OTDR. Because OTDR is a mature technology, in situations where it is suitable to the task, it can provide an affordable alternative.

The OFDR-based system also includes polarization-mode coupling.5 When stresses are applied on a polarization-maintaining fiber (such as we use), part of the light is coupled from one polarization mode to the other at the stress points. Coupling losses are proportional to the intensity of external stress where it occurs. Consequently, combining the polarization-mode coupling method with the OFDR technique7 makes it possible to measure the intensity and location of the external stress with high accuracy and high spatial resolution. Figure 4 shows the results of a test of the OFDR sensor's spatial resolution. The graph indicates a clear response from the application of two 200g pressure devices spaced 5cm apart and arranged to exert shear stresses along the PMF. We are currently installing sensing systems of this type in certain landslide-prone areas in China to collect more data to enable earlier, more accurate prediction of landslides.

Figure 4. Two stress points acting on a polarization-maintaining fiber (PMF) with space of 5cm.

This work was supported by the National Nature Science Foundation of China (grant 60925019) and the Fundamental Research Funds for the Central Universities (grants ZYGX2009Z002 and ZYGX2009J053).

Yong Liu, Zhiyong Dai, Xiaojun Zhou, Zengshou Peng, Jianfeng Li, Zhonghua Ou, Yongzhi Liu
School of Opto-Electronic Information
University of Electronic Science and Technology of China
Chengdu, China

1. L. Zan, G. Latini, E. Piscina, G. Polloni, P. Baldelli, Landslides early warning monitoring system, IEEE Int'l Geosci. Remote Sens. Symp. (IGARSS) 1, pp. 188-190, 2002.
2. Q. Jianping, Theory and Practice for Hazard Reduction Landslide, Science Press, Beijing, 1997. In Chinese.
3. Y. Liu, Z. Dai, X. Zhang, Z. Peng, J. Li, Z. Ou, Y. Liu, Optical fiber sensors for landslide monitoring, Proc. SPIE 7844, pp. 78440D, 2010. doi:10.1117/12.873913
4. Z. Dai, Y. Liu, L. Zhang, Z. Ou, C. Zhou, Y. Liu, Landslide monitoring based on high-resolution distributed fiber optic stress sensor, J. Electron. Sci. Technol. China 6, pp. 416-419, 2008.
5. M. P. Gold, Design of a long-range single-mode OTDR, J. Lightwave Technol. 3, pp. 39-46, 1985.
6. M. Tsubokawa, T. Higashi, Y. Negishi, Mode coupling due to external forces distributed along a polarization-maintaining fiber: an evaluation, Appl. Opt. 27, pp. 166-173, 1988.
7. W. Eickhoff, R. Ulrich, Optical frequency domain reflectometry in single-mode fiber, Appl. Phys. Lett. 39, pp. 693-695, 1981.