SPIE Startup Challenge 2015 Founding Partner - JENOPTIK Get updates from SPIE Newsroom
  • Newsroom Home
  • Astronomy
  • Biomedical Optics & Medical Imaging
  • Defense & Security
  • Electronic Imaging & Signal Processing
  • Illumination & Displays
  • Lasers & Sources
  • Micro/Nano Lithography
  • Nanotechnology
  • Optical Design & Engineering
  • Optoelectronics & Communications
  • Remote Sensing
  • Sensing & Measurement
  • Solar & Alternative Energy
  • Sign up for Newsroom E-Alerts
  • Information for:

SPIE Photonics West 2017 | Register Today

SPIE Defense + Commercial Sensing 2017 | Call for Papers

Get Down (loaded) - SPIE Journals OPEN ACCESS


Print PageEmail Page

Illumination & Displays

LED-based light guides

Global Lighting Technologies

Global Lighting Technologies (GLT) introduces a new light guide that produces distinct customized emission patterns of light from the top and bottom surface. This enables lighting fixtures to emit light upward and downward using a single light guide with LEDs on one or two edges, while varying the distribution pattern from top to bottom.

One such option is a light guide that will produce a "batwing" distribution in the upward direction, while maintaining a more direct distribution in the downward direction. This distribution would allow proper illumination of a table or desk below the light guide while, at the same time, allowing the indirect lighting of the room from the upward distribution.

Other options include more Lambertian distributions downward for more diffuse lighting as well as varying output angles for the upward distribution.

GLT can also design custom light guide assemblies in a "cartridge" format based on a customer's specific requirements, allowing them to be used as a standardized light source in a variety of fixtures.