SPIE Membership Get updates from SPIE Newsroom
  • Newsroom Home
  • Astronomy
  • Biomedical Optics & Medical Imaging
  • Defense & Security
  • Electronic Imaging & Signal Processing
  • Illumination & Displays
  • Lasers & Sources
  • Micro/Nano Lithography
  • Nanotechnology
  • Optical Design & Engineering
  • Optoelectronics & Communications
  • Remote Sensing
  • Sensing & Measurement
  • Solar & Alternative Energy
  • Sign up for Newsroom E-Alerts
  • Information for:
SPIE Photonics West 2019 | Register Today

SPIE Defense + Commercial Sensing 2019 | Call for Papers

2019 SPIE Optics + Photonics | Call for Papers



Print PageEmail Page

Defense & Security

A pyroelectric biometric sensor system for human identification

A novel pyroelectric sensor system uses biometrics to extract human walking features and to provide high-identification capability for intelligent machines and secure systems.
20 February 2007, SPIE Newsroom. DOI: 10.1117/2.1200702.0609

The pyroelectric infrared (PIR) sensor makes possible high-performance IR radiation detection at room temperature, while cost and low power consumption make it attractive for security applications. Tracking human targets with such a system has been described,1 but little attention to date has been paid to walking, which can also be employed for purposes of identification and scene surveillance in security applications. It can also be used for tracking multiple persons.

When humans walk, the motion of various parts of the body, including the torso, arms, and legs, produces a characteristic signature. Much work on motion analysis as a behavioral biometric has used video cameras to stream large amounts of data from which the identity of the person of interest can be extracted in a computationally expensive way.2,3 A continuous-wave radar has been developed to record the signature corresponding to the walking human gait.4 We propose a new method by which the features of motion are represented by the processed content of the temporal signal, generated by humans crossing the field of view (FOV) of the PIR sensor module.

Figure 1. Experimental setup for the pyroelectric infrared (PIR) sensor-based recognition system.

Feature representation is key to biometric recognition. From a thermal perspective, each person represents a distributed IR source, the distribution function of which is determined by shape and IR emissivity of the skin at every point. Combined with idiosyncrasies of carriage, heat will uniquely impact a surrounding sensor field, even while the subject follows a prescribed path. By measuring the response thus generated within the FOV of a sensor module, we can model data to create a code vector that uniquely identifies the person.

We have developed two PIR feature-generating sensor systems.5,6 One system is analog, the other digital, and both are derived from the signals generated by humans crossing detection areas. The experimental setup used for analog feature generation is shown in Figure 1. A module containing a pyroelectric IR sensor and a Fresnel lens array was mounted on a pillar to detect IR radiation from the target. Data was collected as individuals walked back and forth along a straight path perpendicular to the sensor. With heat flow, electric charge built up on the sensing element by virtue of pyroelectricity. The resulting charge translated into a current that a current-to-voltage transductance amplifier converted to a voltage signal. Spectral techniques analyzed this signal to extract the individual motion features.

Figure 2. Output signals for two individuals crossing the field of view of one sensor unit.

Figure 3. The spectra for two different individuals by performing the Fourier transform of the temporal signals in Figure 2.

Figure 4. A sensor module contains four PIR detectors and periodic sampling masks on Fresnel lens arrays.

Temporal voltage signals generated by two different individuals crossing the sensor FOV are charted in Figure 2, and the corresponding Fourier spectra, shown in Figure 3, are clearly distinctive.

For the digital feature system, the sensor module in Figure 1 was replaced by a module containing four PIR detectors and Fresnel lens arrays covered with periodic sampling masks, as shown in Figure 4. The binary event sequence was chosen as the digital human-motion feature, with an event defined as thermal flux collected by a pyroelectric detector exceeding a given threshold. The event signal is associated with specific motions of human subjects, such as crossing one or more adjacent detection regions. Figure 5 illustrates two 4-bit digital features (event index sequences) generated by two persons. Again, the individual features are markedly distinct.

Figure 5. Two 4-bit digital features (event index sequences) generated by two subjects walking across the detection regions of the sensor module.

During the training stage, analog spectra and digital sequences are modeled in linear regression models and hidden Markov models, respectively, for human recognition in two modalities, path-dependent and path-independent. Average identification rates for a group of 10 persons achieved 90% and 78%, respectively. While the recognition rate can be improved, multiple sensor nodes and additional feature representations may be expected to make the system robust.

Jian-Shuen Fang, Ken Y. Hsu
Department of Photonics and Institute of Electro-Optical Engineering, National Chiao Tung University
Hsinchu, Taiwan
Qi Hao, David J. Brady, Bob D. Guenther
Fitzpatrick Center for Photonics and Communications, Duke University
Durham, USA