SPIE Membership Get updates from SPIE Newsroom
  • Newsroom Home
  • Astronomy
  • Biomedical Optics & Medical Imaging
  • Defense & Security
  • Electronic Imaging & Signal Processing
  • Illumination & Displays
  • Lasers & Sources
  • Micro/Nano Lithography
  • Nanotechnology
  • Optical Design & Engineering
  • Optoelectronics & Communications
  • Remote Sensing
  • Sensing & Measurement
  • Solar & Alternative Energy
  • Sign up for Newsroom E-Alerts
  • Information for:

SPIE Photonics West 2019 | Call for Papers

SPIE Defense + Commercial Sensing 2019 | Call for Papers

2018 SPIE Optics + Photonics | Register Today



Print PageEmail PageView PDF


Liquid dispensing of ultrasmall volumes using miniaturized probes

Microscale approaches to depositing liquids on surfaces are suitable both for making biomolecule microarrays and as tools for rapid prototyping.
12 December 2006, SPIE Newsroom. DOI: 10.1117/2.1200611.0478

Small-scale, high-precision liquid delivery technologies are a welcome innovation in a number of areas. For example, the increasing miniaturization of microarrays for use in genomics and proteomics makes impractical conventional dispensing systems based on pipettes, pin and ring arrangements, and inkjet printing. Microfabricated probes developed for scanning probe microscopy (SPM), on the other hand, represent unique, versatile tools for working at the nanometer scale.

Several techniques exist for liquid dispensing based on SPM-like nanoprobes. The first of these, dip-pen nanolithography (DPN), is based on immersing an SPM probe into molecular solution (the ‘ink’), and then writing molecular patterns with feature sizes as small as several tens of nanometers.1 An alternative is bioplume technology, which allows larger amounts of ink to be deposited by charging the probe with ink along the probe shaft. Surface structures created in this way, however, have larger dimensions.2

Here we describe a technology called nanoscale dispensing (NADIS) that is based on apertured nanoprobes.3,4 Hollow probes are loaded with ink, either manually or using a fluidic channel system. When the probe tip makes contact with the substrate, a small amount of liquid is transferred through the aperture to the surface: see Figure 1(left). To control the deposition process, the surface energies of both probe and substrate must be sufficiently controlled.

Figure 1. (Left) In nanoscale dispensing (NADIS), liquid is deposited by an apertured probe on contact with a substrate surface. (Right) Scanning electron microscope image of a NADIS probe with a nanochannel incorporated into the cantilever. (Inset) Cross-section of a cantilever beam shows the hollow channel structure.

Figure 1(right and inset) shows a scanning electron micrograph of a NADIS probe with an integrated channel system.5 This allows liquid delivery from distant macroscopic reservoirs, thus opening the way to high-volume deposition applications without having to repeatedly reload the probe. Similar developments have been reported for DPN-like systems.6

NADIS probes can be incorporated into standard force microscope instruments. Figure 2 shows the result of NADIS deposition of a suspension of nanoparticles. After the solvent has been evaporated, small assemblies of nanoparticles remain on the surface. Whereas the liquid droplets deposited can have volumes as small as attoliters, the resulting nanoparticle structures are even smaller, with dimensions n the 50nm range and below.

Figure 2. NADIS deposition of a suspension produces a nanoparticle pattern. Liquid droplets smaller than 400nm in diameter can be deposited. The resulting nanoparticle assemblies are much smaller. Scale bar: 2.5μm.

Proof-of-concept experiments can be carried out conveniently using single probes, but real-world applications often require greater throughout. Operation of large arrays of probes in parallel has been reported for various technologies. In some cases individual actuation of each probe is possible.7 A recent development is the combination of liquid deposition and templated substrate surfaces. Indeed, prestructuring substrates at the nanometer scale, say, via molecular assembly, offers a level of control and optimization of great use in microtechnology and biosensing.8

This work was partly supported by the Swiss Federal Office for Education and Science in the framework of the EU-funded project Emerging Nanopatterning Methods NaPa (contract no. NMP4-CT-2003-500120) and the Swiss National Competence Center in Nanosciences. Special thanks go to André Meister as well as the CSEM (Swiss Center for Electronics and Microtechnology) microfabrication team for their valuable contribution.

Harry Heinzelmann
Neuchâtel, Switzerland

Harry Heinzelmann is vice president and head of Nanotechnology and Life Sciences at CSEM (Swiss Center for Electronics and Microtechnology) in Neuchâtel. He holds university degrees from the University of Basel and was on postdoc assignment at the IBM Almaden and Zurich Research Laboratories. He is currently secretary of the Nanotechnology Section of the Swiss Society of Optics and Microscopy, and a member of the advisory board of NanoDimension, a provider of early-stage venture capital to the nanotechnology industry.