|
|
|
ENMET Corporation
Company Description
ENMET manufactures hazardous gas detection products for health, safety and medical applications, including compressed air line monitors, medical gas verifiers, MRI oxygen monitors, portable detectors and continuous multi-channel fixed systems. Analyzers are supplied for measuring carbon dioxide, carbon monoxide, oxygen, dew point, ppm and LEL hydrocarbons, and many toxic gases including Formaldehyde, HF, HCl, O3, Cl2, SO2, NH3, ClO2, etc.
Aircraft Jet fuel leak monitors are also available. These devices utilize photo ionization detection (PID) technology and are qualified for JP-5, JP-8, and Jet A on manned and unmanned military aircraft. The fuel leak detection range is 0 to 2500 ppm which covers up to approximately 35% of the lower flammable limit of jet fuel. Discrete I/O version provides two factory programmable alarm points and one fault output and acknowledgement to health check request. The RS-485 version provides actual ppm readings and fault indications via serial data and the alarm point triggering is handled by customer. Up to 8 detection units can be networked on a single bus in the RS-485 version.
Combining multiple sensors in a single instrument (ProAir 2200, Matrix, etc) allows ENMET instruments to evaluate Pilot Oxygen Systems and Aircraft Cabin Atmospheres for trace contaminants such as CO, CO2, NO, NO2 and VOC’s.
Contact Information
 PO Box 979
680 Fairfield Ct
Ann Arbor,MI
United States
Press Releases
| Jet Fuel Vapor Sensing - Aircraft Fuel Leak Detector
ENMET offers a Jet Fuel Vapor Sensor specifically designed for aircraft fuel leak detection. These devices utilize photo ionization detection (PID) technology and are qualified for JP-5, JP-8, and Jet A on manned and unmanned military aircraft. The fuel leak detection range is 0 to 2500 ppm which covers up to approximately 35% of the lower flammable limit of jet fuel. The detector is factory calibrated for offset and up to four span points to compensate for non-linear detector response. There are 2 versions of this leak detector. The Discrete I/O Version provides two alarm points and one fault output and are factory progammable. This version provides acknowledgement to health check request. The RS-485 Version provides actual ppm readings and fault indications via serial data. The alarm point triggering is handled by the customer and up to 8 instruments can be networked on a single Bus.
Combining multiple sensors in a single instrument (ProAir 2200, Matrix, etc) allows ENMET instruments to evaluate Pilot Oxygen Systems and Aircraft Cabin Atmospheres for trace contaminants such as CO, CO2, NO, NO2 and VOC’s.The Jet Fuel Leak detectors can monitor JP-5, JP-8 and Jet A fuel vapors. In addition to these specialized jet fuel vapor detectors ENMET manufactures many hazardous gas detection products for health, safety and medical applications, including compressed air line monitors, medical gas verifiers, MRI oxygen monitors, portable detectors and continuous multi-channel fixed systems. Analyzers are supplied for measuring carbon dioxide, carbon monoxide, oxygen, dew point, ppm and LEL hydrocarbons, and many toxic gases including Formaldehyde, HF, HCl, O3, Cl2, SO2, NH3, ClO2, etc. |
|
|
|
|
|
