Town & Country Resort and Convention Center
San Diego, California, United States
10 - 14 March 2013
Conference 8695
Health Monitoring of Structural and Biological Systems VII
Monday - Thursday 11 - 14 March 2013
Important
Dates
show | hide
Abstract Due:
27 August 2012

Author Notification:
5 November 2012

Manuscript Due Date:
11 February 2013

Conference
Committee
show | hide
Monday 11 March Show All Abstracts
Session 1:
Guided Waves for SHM: Composites I
Monday 11 March 2013
10:30 AM - 12:30 PM
Location: Royal Palm Two

Sessions 1 and 2 run concurrently.
Monitoring of corrosion damage using high-frequency guided ultrasonic waves
Paper 8695-1
Author(s):
Show Abstract
Characterization of Lamb wave attenuation mechanisms
Paper 8695-2
Author(s):
Show Abstract
Structural health monitoring and damage prognosis in composite repaired structures through the excitation of guided ultrasonic waves
Paper 8695-3
Author(s):
Show Abstract
Lamb waves in a honeycomb composite sandwich plate
Paper 8695-4
Author(s):
Show Abstract
Detection of impact damage in composite panels using guided ultrasonic waves
Paper 8695-6
Author(s):
Show Abstract
Session 2:
Civil Engineering Applications: Bridges and Buildings
Monday 11 March 2013
10:30 AM - 12:30 PM

Sessions 1 and 2 run concurrently.
Structural health monitoring of bridges using digital image correlation
Paper 8695-7
Author(s):
Show Abstract
Real-time structural health monitoring of live loads on a flat commercial roof
Paper 8695-8
Author(s):
Show Abstract
Applications of inter-digitized transducers (IDTs) for structural health monitoring (SHM) of bridge structures
Paper 8695-9
Author(s):
Show Abstract
Site-Specific Live Load Factor Calibration for Weigh-in-Motion Sites with especially heavy traffic volume
Paper 8695-10
Author(s):
Show Abstract
Damage identification utilizing dynamic deflection of bridge structure under vehicle loading
Paper 8695-11
Author(s):
Show Abstract
Structural Health Monitoring of a Large Span Cable Structures based on FBG sensors
Paper 8695-12
Author(s):
Show Abstract
Session 3:
Guided Waves for SHM: Composites II
Monday 11 March 2013
1:30 PM - 3:30 PM
Location: Royal Palm Two

Sessions 3 and 4 run concurrently.
Damage detection in reusable launch vehicle components using guided ultrasonic waves and 3D laser vibrometry
Paper 8695-13
Author(s):
Show Abstract
Advanced signal processing for high temperatures health monitoring of condensed water height in steam pipes
Paper 8695-130
Author(s):
Show Abstract
A new temperature compensation method for guided wave-based structural health monitoring
Paper 8695-18
Author(s):
Show Abstract
Predictive modeling of PWAS-coupled shear horizontal waves
Paper 8695-16
Author(s):
Show Abstract
Lamb waves in disbonded sandwich structures
Paper 8695-17
Author(s):
Show Abstract
NDE of composite structures using ultrasonic guided waves
Paper 8695-15
Author(s):
Show Abstract
Session 4:
Issues and Practical Considerations Related to SHM I
Monday 11 March 2013
1:30 PM - 3:30 PM

Sessions 3 and 4 run concurrently.
Automated extraction of damage features through genetic programming
Paper 8695-19
Author(s):
Show Abstract
Technological challenges of developing wireless health and usage monitoring systems
Paper 8695-20
Author(s):
Show Abstract
Integrated nondestructive testing approach for damage detection and quantification in structural components
Paper 8695-21
Author(s):
Show Abstract
Error analysis of the extended Kalman filter applied to the simultaneous localization and mapping problem
Paper 8695-22
Author(s):
Show Abstract
Corrosion monitoring system for aircraft structures
Paper 8695-23
Author(s):
Show Abstract
A design method research of an extensometer on extreme conditions
Paper 8695-24
Author(s):
Show Abstract
Session 5:
Guided Waves for SHM: Nonlinear Ultrasonics
Monday 11 March 2013
4:00 PM - 6:00 PM
Location: Royal Palm Two

Sessions 5 and 6 run concurrently.
Nonlinear guided waves in solids under constrained thermal expansion
Paper 8695-25
Author(s):
Show Abstract
Monitoring ageing of alkali resistant glass fiber reinforced cement (GRC) using guided ultrasonic waves
Paper 8695-26
Author(s):
Show Abstract
Fatigue crack detection using guided waves nonlinear modulation
Paper 8695-27
Author(s):
Show Abstract
Cumulative second harmonics in weakly nonlinear plates and shells
Paper 8695-28
Author(s):
Show Abstract
A Hybrid Characterization Method for Fatigue Damage Using Nonlinear Lamb Waves and Piezoelectric Sensor Networks
Paper 8695-29
Author(s):
Show Abstract
Nonlinear Elastic Imaging of low-velocity impact damage in Composite Structures using an Inverse Filtering approach
(Canceled)
Paper 8695-30
Author(s):
Show Abstract
Session 6:
Issues and Practical Consideration Related to SHM II
Monday 11 March 2013
4:00 PM - 6:00 PM

Sessions 5 and 6 run concurrently.
Detection, localization and energy quantification of shocks on mechanical structures using elastic energy flow estimators from piezoelectric sensors bonded on the structure.
Paper 8695-31
Author(s):
Show Abstract
Numerical and experimental analysis of guided waves propagation in composite plates
Paper 8695-32
Author(s):
Show Abstract
Reliable predictions of micro-cracks from macro-scale responses
(Canceled)
Paper 8695-33
Author(s):
Show Abstract
FPGA based hard- and software platform for ultrasound measurement systems and its application to time of flight measurement and phase sensitive ultrasound microscopy
Paper 8695-34
Author(s):
Show Abstract
A design for autonomous self-building blocks
Paper 8695-35
Author(s):
Show Abstract
Analysis of wave propagation In rib-stiffened and isogrid panels for structural health monitoring techniques
(Canceled)
Paper 8695-36
Author(s):
Show Abstract
Tuesday 12 March Show All Abstracts
Session 7:
Optical Techniques for SHM
Tuesday 12 March 2013
9:30 AM - 10:30 AM
Location: Royal Palm Two

Sessions 7 and 8 run concurrently.
Structural dynamic characterization of small-scale multipurpose payloads using conventional and fiber optic sensors
Paper 8695-37
Author(s):
Show Abstract
Life cycle strain monitoring of composite airframe structures by FBG sensors
Paper 8695-38
Author(s):
Show Abstract
Structural health monitoring of concrete elements with embedded arrays of optical fibers
Paper 8695-39
Author(s):
Show Abstract
Session 8:
SHM for Pipes
Tuesday 12 March 2013
9:30 AM - 10:30 AM

Sessions 7 and 8 run concurrently.
High temperatures health monitoring of the condensed water height in steam pipe systems
Paper 8695-40
Author(s):
Show Abstract
Change in time-of-flight of longitudinal (axisymmetric) wave modes due to lamination in steel pipes
Paper 8695-41
Author(s):
Show Abstract
Characterization of traffic loads on buried pipeline for life-cycle monitoring and management of municipal distribution system
Paper 8695-42
Author(s):
Show Abstract
Session 9:
Guided Waves for SHM: Localization Issues
Tuesday 12 March 2013
11:00 AM - 1:00 PM
Location: Royal Palm Two

Sessions 9 and 10 run concurrently.
Localization of defects in irregular waveguides by dispersion compensation and pulse compression
Paper 8695-43
Author(s):
Show Abstract
Adaptive unscented Kalman filter (UKF) for acoustic emission (AE) source localization in noisy environment
Paper 8695-44
Author(s):
Show Abstract
Guided waves-based damage localization in riveted aircraft panel
Paper 8695-45
Author(s):
Show Abstract
Signal processing for the inspection of immersed structures
Paper 8695-46
Author(s):
Show Abstract
Design of a low-power structural monitoring system to locate impacts based on dispersion compensation
Paper 8695-47
Author(s):
Show Abstract
Quantitative monitoring of two-dimensional damage using envelope locating curves method
Paper 8695-48
Author(s):
Show Abstract
Session 11:
Guided Waves for SHM: Distributed Sensors and Sensor Network
Tuesday 12 March 2013
2:00 PM - 3:20 PM
Location: Royal Palm Two

Sessions 11 and 12 run concurrently.
Implementation of a novel imaging technique in an existing structural health monitoring system
Paper 8695-54
Author(s):
Show Abstract
Guided ultrasonic wave propagation through inaccessible damage in a folded plate using sensor-actuator network
Paper 8695-55
Author(s):
Show Abstract
Damage Detection in Composite Structures with Multi-Path Guided Wave Imaging
Paper 8695-56
Author(s):
Show Abstract
Evaluation of the Lamb waves approach to detect simulated damage in orthogonal plane of the sensor network surface for corrosion detection application
Paper 8695-57
Author(s):
Show Abstract
Session 10:
SHM for Biomedical Applications I
Tuesday 12 March 2013
11:00 AM - 1:00 PM

Sessions 9 and 10 run concurrently.
Smart materials for high power applications (Invited Paper)
Paper 8695-49
Author(s):
Show Abstract
Piezoelectric Thick Films for High Frequency Biomedical Ultrasonic Transducer Applications (Invited Paper)
Paper 8695-50
Author(s):
Show Abstract
Quantitative acoustic evaluation of materials: devices and applications of single crystal PCMUT technology
Paper 8695-51
Author(s):
Show Abstract
Analytical model of planar LiNbO3 plate with four-layer structure of inversion layer
Paper 8695-52
Author(s):
Show Abstract
Design, fabrication, and test of a small aperture, dual frequency ultrasound transducer
Paper 8695-53
Author(s):
Show Abstract
Session 12:
SHM for Railway Track, Energy Harvesting, and Other Issues
Tuesday 12 March 2013
2:00 PM - 3:40 PM

Sessions 11 and 12 run concurrently.
On the self-powering of SHM techniques using seismic energy harvesting
Paper 8695-58
Author(s):
Show Abstract
Axial stress determination using Impedance-based method and its application on the thermal stresses measurement in continuous welded rail
Paper 8695-59
Author(s):
Show Abstract
Experiment study on structure health monitoring with high-order resonant circuit
Paper 8695-60
Author(s):
Show Abstract
Multiscale analysis of wave-damage interaction in two and three dimensional isotropic plates
Paper 8695-61
Author(s):
Show Abstract
Acoustic emission crack detection of railway turnouts using FBG sensing technology
Paper 8695-62
Author(s):
Show Abstract
Session 13:
Guided Waves for SHM: Modeling Aspects
Tuesday 12 March 2013
4:00 PM - 6:20 PM
Location: Royal Palm Two

Sessions 13 and 14 run concurrently.
Piezoelectric coupled LISA for guided wave generation and propagation
Paper 8695-63
Author(s):
Show Abstract
Modeling of guided waves for detection of linear and nonlinear structural damage
Paper 8695-64
Author(s):
Show Abstract
A coupled SAFE-BEM formulation for dispersion data extraction of leaky guided waves in waveguides of arbitrary cross-section
Paper 8695-65
Author(s):
Show Abstract
Simulation of Lamb waves using the spectral cell method
Paper 8695-66
Author(s):
Show Abstract
A guided wave approach for the detection of damage in a structure having elements with periodic damage
Paper 8695-67
Author(s):
Show Abstract
Fully coupled electromechanical elastodynamic model for guided wave propagation analysis
Paper 8695-68
Author(s):
Show Abstract
Damage analysis in composite structures using finite element method for SHM purposes
(Canceled)
Paper 8695-69
Author(s):
Show Abstract
Session 14:
Novel Instrumentation for Sensing and Actuation
Tuesday 12 March 2013
4:00 PM - 6:20 PM

Sessions 13 and 14 run concurrently.
A flexible insert for wireless strain sensing
Paper 8695-70
Author(s):
Show Abstract
Why may an atomic clock be needed for ultrasonic SHM with high temporal resolution?
Paper 8695-71
Author(s):
Show Abstract
Liquid viscosity measurement using super-harmonic resonance
Paper 8695-72
Author(s):
Show Abstract
Effects of fastener load on wave propagation through lap joint
Paper 8695-73
Author(s):
Show Abstract
Characterization in various contrasts representing material properties by microscopic acoustic imaging
Paper 8695-74
Author(s):
Show Abstract
Forward light scattering method for structural characterization of electrospun fibers
Paper 8695-75
Author(s):
Show Abstract
Spectroscopic ellipsometry investigation of gold nanoparticles embedded in PDMS for bio-sensing applications
Paper 8695-76
Author(s):
Show Abstract
Session PTue:
Poster Session
Tuesday 12 March 2013
6:00 PM - 7:30 PM
Location: Golden Ballroom

Conference attendees are invited to attend the joint poster session/exhibition reception to network, enjoy light refreshments, and view the poster papers. Attendees are required to wear their conference registration badge.

Authors of poster papers will be present to answer questions concerning their papers. Poster authors must set up their poster between 10 am and 4 pm on Tuesday 12 March.
Tissue characterization using an acoustic wave tactile sensor array
Paper 8695-119
Author(s):
Show Abstract
Sensitivity-based optimal sensor placement of multi-type sensor
Paper 8695-120
Author(s):
Show Abstract
Bi-probability structural risk management for container cranes
Paper 8695-121
Author(s):
Show Abstract
Damage detection using vector auto-regressive models
Paper 8695-122
Author(s):
Show Abstract
Stress historical-log recording system based on ubiquitous mechanoluminescent sensing material
Paper 8695-123
Author(s):
Show Abstract
Non-contact measurement assessment of aerospace structures
Paper 8695-124
Author(s):
Show Abstract
Damage detection of a prototype building structure under shaking table testing using outlier analysis
Paper 8695-125
Author(s):
Show Abstract
Piezo-composites for energy harvesting from low-frequency noises
Paper 8695-126
Author(s):
Show Abstract
Study on self-healing effect of concrete cracks based on microbial technique
Paper 8695-127
Author(s):
Show Abstract
Inverse problem solution in the identification of material elastic constants
Paper 8695-128
Author(s):
Show Abstract
Study of nonlinear interaction of Lamb waves with breathing crack in an aluminium plate
(Canceled)
Paper 8695-129
Author(s):
Show Abstract
Development of locally resonant structures for sonic barriers
Paper 8695-131
Author(s):
Show Abstract
Effect of Uncertainty in Material Properties on Optimal Layout of Sensor Network for Achieving Highest Probability of Damage Detection in Structures
(Canceled)
Paper 8695-14
Author(s):
Show Abstract
Advanced signal processing for imaging defects using scanning-laser-generated high order guided wave modes
(Canceled)
Paper 8695-115
Author(s):
Show Abstract
Wednesday 13 March Show All Abstracts
Session 15:
SHM for Composite Materials
Wednesday 13 March 2013
9:30 AM - 10:30 AM
Guided wave propagation in carbon composite laminate using piezoelectric wafer active sensors
Paper 8695-77
Author(s):
Show Abstract
Sensing capability for a delamination in carbon fiber reinforced polymer laminates via embedded with Terfenol-D particles
Paper 8695-78
Author(s):
Show Abstract
Experimental modal analysis for damage detection in composite plates using laser Doppler vibrometer
Paper 8695-79
Author(s):
Show Abstract
Session 16:
Guided Waves for SHM: Temperature and Texture Issues
Wednesday 13 March 2013
11:00 AM - 1:00 PM
Nonlinear guided waves for neutral temperature measurement in continuous welded rails: results from laboratory and field tests
Paper 8695-80
Author(s):
Show Abstract
Elasto-acoustic coefficients relating to the time-of-flight of guided acoustic waves travelling on aluminum structures and respective temperature coefficients
Paper 8695-81
Author(s):
Show Abstract
Temperature-independent localization algorithm using guided wave interrogation methods
Paper 8695-82
Author(s):
Show Abstract
Studies of texture in nuclear graphites using laser ultrasonic line source measurements
Paper 8695-83
Author(s):
Show Abstract
Temperature effect modelling of piezoceramic transducers used for Lamb wave propagation in damage detection applications
Paper 8695-84
Author(s):
Show Abstract
Cointegration and wavelet-analysis-based approach for Lamb-wave-based structural damage detection
Paper 8695-85
Author(s):
Show Abstract
Session 17:
SHM for Biomedical Applications II
Wednesday 13 March 2013
2:00 PM - 3:40 PM
In-vivo muscle length-force-joint angle relationship for quasi-static muscle action of the biceps muscle
Paper 8695-86
Author(s):
Show Abstract
A 2D piezoelectric actuated scanning image acquisition
Paper 8695-87
Author(s):
Show Abstract
Quantitative simulation of wave propagation in a human leg to support the ultrasonic noninvasive assessment of human bones
Paper 8695-88
Author(s):
Show Abstract
Bio-penetrating near-infrared mechanoluminescent sensing material for on-site biomechanical measurement
Paper 8695-89
Author(s):
Show Abstract
Electromagnetic coil/inductance-based nondestructive methods for locating distal screw-holes of an intramedullary interlocking-nail
Paper 8695-90
Author(s):
Show Abstract
Session 18:
Metamaterial
Wednesday 13 March 2013
4:00 PM - 6:40 PM
An elastic metamaterial beam for broadband vibration suppression
Paper 8695-91
Author(s):
Show Abstract
High stiffness, high damping chiral metamaterial assemblies for low-frequency applications
Paper 8695-92
Author(s):
Show Abstract
Novel split ring metamaterial for multiple band gaps and vibration control
Paper 8695-93
Author(s):
Show Abstract
Actual working mechanisms of smart metamaterial structures
Paper 8695-94
Author(s):
Show Abstract
Effective medium properties of acoustic crystals in two dimensions
Paper 8695-95
Author(s):
Show Abstract
Acoustic metamaterials: super absorbers for low-frequency sound
Paper 8695-96
Author(s):
Show Abstract
Focusing flexural Lamb waves by designing elastic metamaterials bonded on a plate
Paper 8695-97
Author(s):
Show Abstract
Nonlocal effect of acoustic wave interaction with thin-plate metamaterial
Paper 8695-98
Author(s):
Show Abstract
Thursday 14 March Show All Abstracts
Session 19:
SHM based on Nonlinear Techniques
Thursday 14 March 2013
9:30 AM - 10:30 AM
Frequency-wavenumber filtering of nonlinear Lamb waves for detection and imaging of fatigue damage in aluminum plates
(Canceled)
Paper 8695-99
Author(s):
Show Abstract
Linear and nonlinear acoustic moment for structural health monitoring for compression loaded structures
Paper 8695-100
Author(s):
Show Abstract
Nonlinear ultrasonic evaluation of fatigue damage of adhesive joints
(Canceled)
Paper 8695-101
Author(s):
Show Abstract
Session 20:
Guided Wave for SHM: Sensing, Excitation and Related Issues
Thursday 14 March 2013
11:00 AM - 1:00 PM
Strategies for guided wave imaging using two-element annular transducers
Paper 8695-102
Author(s):
Show Abstract
Stability of guided wave signals from bonded piezoelectric sensors
Paper 8695-103
Author(s):
Show Abstract
Uncertainty quantification of a guided wave structural health monitoring system for composite bolted joints
Paper 8695-104
Author(s):
Show Abstract
Pressure mapping system based on guided waves reflection
Paper 8695-105
Author(s):
Show Abstract
Wavelet best basis compressed sensing of ultrasonic guided waves
Paper 8695-106
Author(s):
Show Abstract
Crack detection with Lamb wave wavenumber analysis
Paper 8695-107
Author(s):
Show Abstract
Session 21:
Vibration Based SHM Systems
Thursday 14 March 2013
2:00 PM - 3:40 PM
Crack detection on wind turbine blade in an operating environment using vibro-acoustic modulation technique
(Canceled)
Paper 8695-108
Author(s):
Show Abstract
Bolted joint loosening detection by using laser excitation
Paper 8695-109
Author(s):
Show Abstract
Damage-patterns-based method to locate discontinuities in beams
Paper 8695-110
Author(s):
Show Abstract
Dynamic characteristics and vibration-based damage inspection of structures with actual fatigue cracks
Paper 8695-111
Author(s):
Show Abstract
Monitoring the fracture healing of an internally fixated pelvis using vibration analysis
Paper 8695-112
Author(s):
Show Abstract
Session 22:
Signal Processing for SHM
Thursday 14 March 2013
4:00 PM - 6:00 PM
Frequency response feature selection in a Bayesian framework
Paper 8695-113
Author(s):
Show Abstract
Abnormal behavior detection in the Jeremiah Morrow Bridge based on the long term measurement data patterns
Paper 8695-114
Author(s):
Show Abstract
Phased array design for optimized directivity behavior in guided wave applications
Paper 8695-5
Author(s):
Show Abstract
Multiscale characterization of damage in plates based on 2D Mexican wavelet
Paper 8695-116
Author(s):
Show Abstract
The PRICONA algorithm for biological spectra normalization
Paper 8695-117
Author(s):
Show Abstract
Detection of damage in beams using Teager energy operator
Paper 8695-118
Author(s):
Show Abstract
Back to Top