Share Email Print
cover

Proceedings of SPIE Volume 9738 • new

Laser 3D Manufacturing III
Format Member Price Non-Member Price
Softcover $67.50 $90.00

Volume Details

Volume Number: 9738
Date Published: 7 July 2016
Softcover: 27 papers (254) pages
ISBN: 9781628419733

Table of Contents
show all abstracts | hide all abstracts
Front Matter: Volume 9738
Author(s): Proceedings of SPIE
Improvement in contact resistance of 4H-SiC by excimer laser doping using silicon nitride films
Author(s): R. Kojima; H. Ikenoue; M. Suwa; A. Ikeda; D. Nakamura; T. Asano; T. Okada
Show Abstract
A cantilever based optical fiber acoustic sensor fabricated by femtosecond laser micromachining
Author(s): Jie Liu; Lei Yuan; Jie Huang; Hai Xiao
Show Abstract
Laser-assisted inkjet printing of highly viscous fluids with sub-nozzle resolution
Author(s): Paul Delrot; Miguel A. Modestino; Demetri Psaltis; Christophe Moser
Show Abstract
Laser printing and femtosecond laser structuring of electrode materials for the manufacturing of 3D lithium-ion micro-batteries
Author(s): P. Smyrek; H. Kim; Y. Zheng; H. J. Seifert; A. Piqué; W. Pfleging
Show Abstract
Precise 3D printing of micro/nanostructures using highly conductive carbon nanotube-thiol-acrylate composites
Author(s): Y. Liu; W. Xiong; L. J. Jiang; Y. S. Zhou; Y. F. Lu
Show Abstract
Potential for GPC-based laser direct writing
Author(s): Andrew Bañas; Jesper Glückstad
Show Abstract
3D light robotics
Author(s): Jesper Glückstad; Darwin Palima; Mark Villangca; Andrew Banas
Show Abstract
Advanced two-photon photolithography for patterning of transparent, electrically conductive ionic liquid-polymer nanostructures
Author(s): Natalia A. Bakhtina; Neil MacKinnon; Jan G. Korvink
Show Abstract
Laser printing of 3D metallic interconnects
Author(s): Iyoel Beniam; Scott A. Mathews; Nicholas A. Charipar; Raymond C. Y. Auyeung; Alberto Piqué
Show Abstract
3D manufacturing of micro and nano-architected materials
Author(s): Lorenzo Valdevit
Show Abstract
Review on laser powder injection additive manufacturing of novel alloys and composites
Author(s): B. Zheng; N. Yang; J. Yee; K. Gaiser; W. Y. Lu; L. Clemon; Y. Zhou; E. J. Lavernia; J. M. Schoenung
Show Abstract
Towards in-situ process monitoring in selective laser sintering using optical coherence tomography
Author(s): Guangying Guan; Zeng Hai Lu; Matthias Hirsch; Ruth Goodridge; David T. D. Childs; Stephen J. Matcher; Adam T. Clare; Kristian M. Groom
Show Abstract
Sensing for directed energy deposition and powder bed fusion additive manufacturing at Penn State University
Author(s): Abdalla R. Nassar; Edward W. Reutzel; Stephen W. Brown; John P. Morgan; Jacob P. Morgan; Donald J. Natale; Rick L. Tutwiler; David P. Feck; Jeffery C. Banks
Show Abstract
Optical design and initial results from NIST's AMMT/TEMPS facility
Author(s): Steven Grantham; Brandon Lane; Jorge Neira; Sergey Mekhontsev; Mihaela Vlasea; Leonard Hanssen
Show Abstract
Towards photo-induced swimming: actuation of liquid crystalline elastomer in water
Author(s): Giacomo Cerretti; Daniele Martella; Hao Zeng; Camilla Parmeggiani; Stefano Palagi; Andrew G. Mark; Kai Melde; Tian Qiu; Peer Fischer; Diederik S. Wiersma
Show Abstract
Femtosecond fiber laser additive manufacturing of tungsten
Author(s): Shuang Bai; Jian Liu; Pei Yang; Meiyu Zhai; Huan Huang; Lih-Mei Yang
Show Abstract
Laser post-processing of Inconel 625 made by selective laser melting
Author(s): David Witkin; Henry Helvajian; Lee Steffeney; William Hansen
Show Abstract
Fabrication and heat treatment of high strength Al-Cu-Mg alloy processed using selective laser melting
Author(s): Hu Zhang; Haihong Zhu; Xiaojia Nie; Ting Qi; Zhiheng Hu; Xiaoyan Zeng
Show Abstract
Additive manufacturing of glass for optical applications
Author(s): Junjie Luo; Luke J. Gilbert; Douglas A. Bristow; Robert G. Landers; Jonathan T. Goldstein; Augustine M. Urbas; Edward C. Kinzel
Show Abstract
Reducing residual stresses and deformations in selective laser melting through multi-level multi-scale optimization of cellular scanning strategy
Author(s): Sankhya Mohanty; Jesper Henri Hattel
Show Abstract
Application of laser ultrasonic non-destructive evaluation technique to additive manufacturing
Author(s): Anthony J. Manzo; Shant Kenderian; Henry Helvajian
Show Abstract
Repurposing mainstream CNC machine tools for laser-based additive manufacturing
Author(s): Jason B. Jones
Show Abstract
X-band printed phased array antennas using high-performance CNT/ion gel/Ag transistors
Author(s): Peter Mack Grubb; Fazel Bidoky; Ankit Mahajan; Harish Subbaraman; Wentao Li; Daniel Frisbie; Ray T. Chen
Show Abstract
The application of digital medical 3D printing technology on tumor operation
Author(s): Jimin Chen; Yijian Jiang; Yangsheng Li
Show Abstract
Experiments for practical education in process parameter optimization for selective laser sintering to increase workpiece quality
Author(s): Bernd Reutterer; Lukas Traxler; Natascha Bayer; Andreas Drauschke
Show Abstract
Improving accuracy of overhanging structures for selective laser melting through reliability characterization of single track formation on thick powder beds
Author(s): Sankhya Mohanty; Jesper Henri Hattel
Show Abstract
Experimental study on Ti alloy plate fabrication by vacuum selective laser melting
Author(s): Yuji Sato; Masahiro Tsukamoto; Yorihiro Yamashita; Shinichiro Masuno; Nobuyuki Abe
Show Abstract
Optical 3D Nano-fabrication: Drawing or Growing? (Conference Presentation)
Author(s): Satoshi Kawata
Show Abstract

© SPIE. Terms of Use
Back to Top