Share Email Print
cover

Proceedings Paper

Compact sensor combining DSPI and the hole-drilling technique to measure non-uniform residual stress fields
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

This paper presents a portable device to essentially measure residual stress fields outside the optical bench. This system combines the hole drilling technique with Digital Speckle Pattern Interferometry (DSPI). The novel feature of this device is its high degree of compaction since only one base supports simultaneously the measurement module and the holedrilling device. A new version of the ASTM E837 standard for the measurement of residual stresses has been improved including the computation method for non-uniform residual stresses. According to this standard, a hole with depth of 1.0 mm should be introduced into the material to assess the stress distribution. The discretization of the stress distribution along the hole depth is performed in 20 equal steps of 0.05 mm, getting the deformations generated for stress relief in every drilling step. A description of the compact device showing the solution for a fast and easy interchanging process between modules is performed in this paper. The proposed system is used to evaluate the residual stress distribution into a sample with a rod welded by friction hydro pillar processing (FHPP).

Paper Details

Date Published: 11 September 2012
PDF: 6 pages
Proc. SPIE 8413, Speckle 2012: V International Conference on Speckle Metrology, 841310 (11 September 2012); doi: 10.1117/12.978183
Show Author Affiliations
Matias R. Viotti, Univ. Federal de Santa Catarina (Brazil)
Armando Albertazzi, Univ. Federal de Santa Catarina (Brazil)


Published in SPIE Proceedings Vol. 8413:
Speckle 2012: V International Conference on Speckle Metrology
Ángel Fernandez Doval; Cristina Trillo, Editor(s)

© SPIE. Terms of Use
Back to Top