Share Email Print
cover

Proceedings Paper

Five Watt Industrial Lithography Excimer Laser System
Author(s): P. Oesterlin; P. Lokai; H. Rosenkranz; H.-J. Kahlert; D. Basting
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The commercial Lambda Physik excimer laser model 248 L was specially designed for deep UV projection lithography. Its output power was 2 W at a pulse repetition frequency of 200 Hz. An improved version of this laser was developed and tested thoroughly. Due to modifications of the optical system and the electrical discharge, the average power could be increased to 5 W without sacrificing other specifications. The bandwidth is better than 0.003 nm (0.5 cm-1), and the wavelength is actively stabilized to ± 0.001 nm. The pulse frequency was raised to 400 Hz to comply with the demands of todays deep UV-steppers. A newly developed module allows absolute wavelength calibration within the tuning range of 248.18 to 248.58 nm. The absolute accuracy of this calibration is ± 0.001 nm. Using this option, the laser can be tuned exactly to the wavelength of best performance of the stepper optics.

Paper Details

Date Published: 11 October 1989
PDF: 3 pages
Proc. SPIE 1138, Optical Microlithography and Metrology for Microcircuit Fabrication, (11 October 1989); doi: 10.1117/12.961750
Show Author Affiliations
P. Oesterlin, Lambda Physik GmbH (Germany)
P. Lokai, Lambda Physik GmbH (Germany)
H. Rosenkranz, Lambda Physik GmbH (Germany)
H.-J. Kahlert, Lambda Physik GmbH (Germany)
D. Basting, Lambda Physik GmbH (Germany)


Published in SPIE Proceedings Vol. 1138:
Optical Microlithography and Metrology for Microcircuit Fabrication

© SPIE. Terms of Use
Back to Top