Share Email Print
cover

Proceedings Paper

Source Effects On Long-Haul, Singlemode Fiber Attenuation Measurements
Author(s): Timothy Reynolds; John Chipman
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

There has been much concern of late over the accuracy of Power Meters used in making loss measurements on long lengths of fiber cable, but comparatively little over the effects of source wavelength and spectral width. Being a function of wavelength, attenuation measurement errors can occur if the source wavelength is not controlled or adequately known. Presently available stable Laser Sources operate within a fairly broad wavelength range, usually being specified by equipment manufacturers at some nominal value of wavelength (1300 or 1550 nanometers) with a wide tolerance (30 to 40 nm). Measuring the same fiber with two "1300 nanometers" sources can result in a significant error. Measuring loss with an LED Source relates little to factory attenuation measurements due to their inherently wide spectral widths. This paper describes analysis and measurements on long lengths of concatenated Singlemode fibers using various Laser and LED Sources. Measurement precisions and repeatabilities are shown for various source types and wavelengths and the source wavelength tolerance required is determined for meaningful measurements.

Paper Details

Date Published: 19 November 1985
PDF: 7 pages
Proc. SPIE 0559, Fiber Optics: Short-Haul and Long-Haul Measurements and Applications III, (19 November 1985); doi: 10.1117/12.949585
Show Author Affiliations
Timothy Reynolds, Intelco (United States)
John Chipman, Intelco (United States)


Published in SPIE Proceedings Vol. 0559:
Fiber Optics: Short-Haul and Long-Haul Measurements and Applications III
Robert L. Galawa, Editor(s)

© SPIE. Terms of Use
Back to Top