Share Email Print
cover

Proceedings Paper

Thermal Deflection Testing Of Two Corning Uletm Mirror Blanks
Author(s): A. J. DeLuzio; A. J. MacGovern; W. P. Barnes
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Thermal deflection tests were run on two ULE fused silica mirror blanks, one solid and one of eggcrate construction, loaned to Itek Corporation by Corning Glass Works. The tests were accomplished by radiant heating of one surface while the deflection of the other surface was observed by means of holographic interferometry. Primary test objectives were (1) the mea-surement of an average thermal expansion coefficient for each blank, and (2) the detection of any unsymmetrical deflection. The thermal expansion coefficient values obtained were 1.1 x 10-7 per °C for the solid blank (30 inches in optical diameter by 4.15 inches thick) and 0.23 x 10-7 per °C for the eggcrate (see Fig. 1). No significant deviations from a uniform spherical deflection were seen. We believe that the error in these measurements does not exceed 0.15 x 10-7 per °C.

Paper Details

Date Published: 24 March 1970
PDF: 8 pages
Proc. SPIE 0019, Space Optics I, (24 March 1970); doi: 10.1117/12.946845
Show Author Affiliations
A. J. DeLuzio, Itek Corporation (United States)
A. J. MacGovern, Itek Corporation (United States)
W. P. Barnes, Itek Corporation (United States)


Published in SPIE Proceedings Vol. 0019:
Space Optics I
Brian J. Thompson, Editor(s)

© SPIE. Terms of Use
Back to Top