Share Email Print
cover

Proceedings Paper

A High Sensitivity Two Layer Resist Process For Use In High Resolution Optical Lithography
Author(s): M. P.C. Watts
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

A two layer resist process has been developed with a 7x reduction in pattern transfer exposure time compared to the "conventional" process that uses PMMA as the bottom layer. The reduction in exposure time was achieved by using a high sensitivity resist as the bottom layer. The pattern transfer wavelength is 310 nm, therefore a dye is needed in the top layer to make it highly absorbtive at 310 nm. This paper will describe the selection process for the dye, resist materials, and details of the process development. Examples of resist patterns will include a demonstration of the effect of partial transmission in the top layer on bottom layer patterns. It will be shown that a transmission of < 0.5% is re-quired for artifact free resist Patterns.

Paper Details

Date Published: 21 May 1984
PDF: 9 pages
Proc. SPIE 0469, Advances in Resist Technology I, (21 May 1984); doi: 10.1117/12.941770
Show Author Affiliations
M. P.C. Watts, Hewlett-Packard Laboratories (United States)


Published in SPIE Proceedings Vol. 0469:
Advances in Resist Technology I
C. Grant Willson, Editor(s)

© SPIE. Terms of Use
Back to Top