Share Email Print
cover

Proceedings Paper

Recording And Readout Testing Of Optical Recording Materials
Author(s): David Cheng
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In order to achieve high capacity archival optical storage, one of the key criteria is selecting a recording media which provides good writing and reading characteristics, good archival qualities and low cost. In this paper I shall describe a computer-controlled static material testing system (MTS) and samples of the test results as applied to Te-monolayer, Te-trilayer, Drexler, Thomson-CSF and the iron dispersion materials. For the recording and reading light source, an argon laser is operated at fundamental mode at X = 515 nm and is externally modulated with an acousto-optic modulator. For reading and focus-tracking, the modulator is operated at a low (-50 μW) level CW mode to provide illumination light. The modulator can also he pulsed at high power (up to 32 mW at the sample surface) with 0.8 p.m spot size at short intervals (>50 nsec) on command for recording laser pulses in coincidence with the read spot position, The focusing, readout, sample movement, laser power control. data acquisition and data analysis are all performed under mini-computer control with human intervention. Manual control mode is also provided and is very desirable for exploring new and unfamiliar materials. A video camera system provides direct viewing of the recording process. Reflectivity of the sample before (R0) and after (R1) the recording laser pulse is measured and read by the computer; from this data a modulation parameter (or contrast), (R0-Ri)/(R0 + R1), is calculated. This measurement is repeated many times to accumulate a statistically significant distribution which aives recording and material noise characteristics important for optical recording. The entire process is repeated at different recording powers to obtain recording power characteristics and sensitivity as well as different pulse widths to obtain reciprocity characteristics. Recording speed (hole opening time) can also be measured with the system. The results of these measurements will be presented for Te-monolayer, Te-trilayer, iron dispersion, Drexler, and Thomson-CSF materials.

Paper Details

Date Published: 26 April 1982
PDF: 5 pages
Proc. SPIE 0299, Advances in Laser Scanning Technology, (26 April 1982); doi: 10.1117/12.932552
Show Author Affiliations
David Cheng, Xerox Research Center (United States)


Published in SPIE Proceedings Vol. 0299:
Advances in Laser Scanning Technology
Leo Beiser, Editor(s)

© SPIE. Terms of Use
Back to Top