Share Email Print
cover

Proceedings Paper

The impact of surface-polish on the angular and wavelength dependence of fiber focal ratio degradation
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

We present measurements of how multimode fiber focal-ratio degradation (FRD) and throughput vary with levels of fiber surface polish from 60 to 0.5 micron grit. Measurements used full-beam and laser injection methods at wavelengths between 0.4 and 0.8 microns on 17 meter lengths of Polymicro FBP 300 and 400 μm core fiber. Full-beam injection probed input focal-ratios between f/3 and f/13.5, while laser injection allowed us to isolate FRD at discrete injection angles up to 17 degrees (f/1.6 marginal ray). We find (1) FRD effects decrease as grit size decreases, with the largest gains in beam quality occurring at grit sizes above 5 μm; (2) total throughput increases as grit size decreases, reaching 90% at 790 nm with the finest polishing levels; (3) total throughput is higher at redder wavelengths for coarser polishing grit, indicating surface-scattering as the primary source of loss. We also quantify the angular dependence of FRD as a function of polishing level. Our results indicate that a commonly adopted micro-bending model for FRD is a poor descriptor of the observed phenomenon.

Paper Details

Date Published: 24 September 2012
PDF: 10 pages
Proc. SPIE 8446, Ground-based and Airborne Instrumentation for Astronomy IV, 84465W (24 September 2012); doi: 10.1117/12.926568
Show Author Affiliations
Arthur D. Eigenbrot, Univ. of Wisconsin-Madison (United States)
Matthew A. Bershady, Univ. of Wisconsin-Madison (United States)
Corey M. Wood, Univ. of Wisconsin-Madison (United States)


Published in SPIE Proceedings Vol. 8446:
Ground-based and Airborne Instrumentation for Astronomy IV
Ian S. McLean; Suzanne K. Ramsay; Hideki Takami, Editor(s)

© SPIE. Terms of Use
Back to Top