Share Email Print

Proceedings Paper

Spherical primary optical telescope (SPOT) segments
Author(s): Christopher Hall; John Hagopian; Michael DeMarco
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The spherical primary optical telescope (SPOT) project is an internal research and development program at NASA Goddard Space Flight Center. The goals of the program are to develop a robust and cost effective way to manufacture spherical mirror segments and demonstrate a new wavefront sensing approach for continuous phasing across the segmented primary. This paper focuses on the fabrication of the mirror segments. Significant cost savings were achieved through the design, since it allowed the mirror segments to be cast rather than machined from a glass blank. Casting was followed by conventional figuring at Goddard Space Flight Center. After polishing, the mirror segments were mounted to their composite assemblies. QED Technologies used magnetorheological finishing (MRF®) for the final figuring. The MRF process polished the mirrors while they were mounted to their composite assemblies. Each assembly included several magnetic invar plugs that extended to within an inch of the face of the mirror. As part of this project, the interaction between the MRF magnetic field and invar plugs was evaluated. By properly selecting the polishing conditions, MRF was able to significantly improve the figure of the mounted segments. The final MRF figuring demonstrates that mirrors, in the mounted configuration, can be polished and tested to specification. There are significant process capability advantes due to polishing and testing the optics in their final, end-use assembled state.

Paper Details

Date Published: 21 September 2012
PDF: 6 pages
Proc. SPIE 8442, Space Telescopes and Instrumentation 2012: Optical, Infrared, and Millimeter Wave, 844222 (21 September 2012); doi: 10.1117/12.926479
Show Author Affiliations
Christopher Hall, QED Technologies, Inc. (United States)
John Hagopian, NASA Goddard Space Flight Ctr. (United States)
Michael DeMarco, QED Technologies, Inc. (United States)

Published in SPIE Proceedings Vol. 8442:
Space Telescopes and Instrumentation 2012: Optical, Infrared, and Millimeter Wave
Mark C. Clampin; Giovanni G. Fazio; Howard A. MacEwen; Jacobus M. Oschmann, Editor(s)

© SPIE. Terms of Use
Back to Top