Share Email Print
cover

Proceedings Paper

ATST telescope pier
Author(s): Paul Jeffers; Eric Manuel; Oliver Dreyer; Hans Kärcher
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The Advanced Technology Solar Telescope (ATST) will be the largest solar telescope in the world with a 4m aperture primary mirror. The off axis nature of the telescope optical layout, has the proportions of an 8 metre class telescope. Accordingly the instrumentation for solar observations a 16m diameter co-rotating laboratory (Coude Rotator) is also located within the telescope pier. The pier has a lower cylindrical profile with an upper conical section to support both the telescope mount with a 9m bearing diameter and contain the 16m diameter Coudé rotator. The performance of this pier cannot be considered in isolation but must account for ancillary equipment, access and initial installation. The Coude rotator structure and bearing system are of similar size to the telescope base structure and therefore this is the proverbial 'ship in a bottle' problem. This paper documents the competing requirements on the pier design and the balancing of these as the design progresses. Also summarized is the evolution of the design from a conceptual traditional reinforced concrete pier to a composite concrete and steel framed design. The stiffness requirements of the steel frame was a unique challenge for both the theoretical performance and overall design strategy considering constructability. The development of design acceptance criteria for the pier is discussed along with interfacing of the AandE firm responsible for the pier design and the telescope designer responsible for the telescope performance.

Paper Details

Date Published: 17 September 2012
PDF: 11 pages
Proc. SPIE 8444, Ground-based and Airborne Telescopes IV, 84440L (17 September 2012); doi: 10.1117/12.923831
Show Author Affiliations
Paul Jeffers, National Solar Observatory (United States)
Eric Manuel, M3 Engineering & Technology Corp. (United States)
Oliver Dreyer, MT Mechatronics GmbH (Germany)
Hans Kärcher, MT Mechatronics GmbH (Germany)


Published in SPIE Proceedings Vol. 8444:
Ground-based and Airborne Telescopes IV
Larry M. Stepp; Roberto Gilmozzi; Helen J. Hall, Editor(s)

© SPIE. Terms of Use
Back to Top