Share Email Print
cover

Proceedings Paper

A novel deformable mirror with curvature and tip/tilt control based on the spider actuator concept
Author(s): Daniel Rodriguez Sanmartin; Tim Button; Carl Meggs; Alan Michette; Slawka Pfauntsch; Ady James; Graham Willis; Camelia Dunare; Tom Stevenson; William Parkes
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The Smart X-Ray Optics (SXO) project comprises a UK-based consortium developing active/adaptive micro-structured optical arrays (MOAs). MOA devices are designed to focus X-rays using grazing incidence reflection through consecutive aligned arrays of microscopic channels. Adaptability is achieved using a combination of piezoelectric actuators, which bend the edges of the silicon chip, and a spider structure, which forms a series of levers connecting the edges of the chip with the active area at the centre, effectively amplifying the bend radius. The spider actuation concept, in combination with deep silicon etching stopped close to the surface, can also be used to create deformable mirrors where the curvature and tip/tilt angles of the mirror can be controlled. Finite Element Analysis (FEA) modelling, carried out for the optimization of the spider MOA device, indicates that deformable mirrors with curvature varying from flat to 5cm ROC and control over the tip/tilt angles of the mirror of +/-3mrad could be achieved. Test spider structures, manufactured using a Viscous Plastic Processing Process for the PZT piezoelectric actuators and a single wet etch step using <111> planes in a (110) silicon wafer for both the silicon channels and the spider structure, have been bent to a radius of curvature smaller than 5 cm. This paper evaluates the spider MOA's concept as a means to achieve deformable mirrors with controllable ROC and control over the tip/tilt angles. FEA modelling results are compared with obtained characterization data of prototype structures. Finally, manufacturing and integration methods and design characteristics of the device, such its scalability, are also discussed.

Paper Details

Date Published: 5 May 2012
PDF: 10 pages
Proc. SPIE 8429, Optical Modelling and Design II, 84291H (5 May 2012); doi: 10.1117/12.922815
Show Author Affiliations
Daniel Rodriguez Sanmartin, Univ. of Brighton (United Kingdom)
The Univ. of Birmingham (United Kingdom)
Tim Button, The Univ. of Birmingham (United Kingdom)
Carl Meggs, The Univ. of Birmingham (United Kingdom)
Alan Michette, King's College London (United Kingdom)
Slawka Pfauntsch, King's College London (United Kingdom)
Ady James, Univ. College London (United Kingdom)
Graham Willis, Univ. College London (United Kingdom)
Camelia Dunare, The Univ. of Edinburgh (United Kingdom)
Tom Stevenson, The Univ. of Edinburgh (United Kingdom)
William Parkes, The Univ. of Edinburgh (United Kingdom)


Published in SPIE Proceedings Vol. 8429:
Optical Modelling and Design II
Frank Wyrowski; John T. Sheridan; Jani Tervo; Youri Meuret, Editor(s)

© SPIE. Terms of Use
Back to Top