Share Email Print
cover

Proceedings Paper

Application of illumination pupilgram control method with freeform illumination
Author(s): Tomoyuki Matsuyama; Naonori Kita; Ryota Matsui; Junji Ikeda
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Source Mask Optimization1 (SMO) is one of the most important techniques available for extending ArF immersion lithography. The combination of freeform source shape and complex mask pattern, determined by SMO, can extend the practical resolution of a lithography system. However, imaging with a small k1 factor (~0.3 or smaller) is very sensitive to many imaging parameters, such as illumination source shape error, lens aberration, process property, etc. As a result, the real source shape must be re-adjusted to realize the expected imaging performance as may be seen, for example, in an Optical Proximity Effect (OPE) curve. In this paper we present an illumination pupilgram re-adjustment method that can effectively control the various illumination parameters to get optimum imaging performance, which is required for the lithography process design. The modulation functions are called Zernike intensity/distortion modulations2. Since the pupilgram modulation is expressed by Zernike polynomials3, a high degree of pupilgram adjustment freedom is provided to the intelligent illuminator4 (freeform illumination) which can be effectively modeled in the optimization. Furthermore, the magnitude of each adjusting Zernike component can be restricted to prevent over modulation, which may affect imaging performance for various patterns on a mask. Furthermore, the linear impact of each term of Zernike modulation can allow us to use Zernike linear combination analysis to calculate imaging performance. Therefore, optimization using a large variety of illumination modulation terms may be possible with reasonable computation loads. The method is combined with an imaging simulator that includes resist models and optimization algorithms in pupilgram refinement software called "OPE Master". The software can take into account the scanner signature and various constraints so that the result of the optimization can be accurately realized on the scanner. The optimization can be performed based on rigorous imaging simulation and Zernike linear combination analysis, which is based on a precalculated Zernike linear sensitivity table.

Paper Details

Date Published: 13 March 2012
PDF: 10 pages
Proc. SPIE 8326, Optical Microlithography XXV, 83260K (13 March 2012); doi: 10.1117/12.916594
Show Author Affiliations
Tomoyuki Matsuyama, Nikon Corp. (Japan)
Naonori Kita, Nikon Corp. (Japan)
Ryota Matsui, Nikon Corp. (Japan)
Junji Ikeda, Nikon Corp. (Japan)


Published in SPIE Proceedings Vol. 8326:
Optical Microlithography XXV
Will Conley, Editor(s)

© SPIE. Terms of Use
Back to Top